Skip to the content
1234567

TPS61099DRV

Texas InstrumentsExtended

-40℃~+150℃@(TJ) 1 1.8V~5.5V 700mV~5.5V Adjustable Boost Boost Built-in Yes WSON-6-EP(2x2) DC-DC Converters ROHS

Part id
ti/TPS61099DRV
Category
DC DC Converters
Package
WSON-6-EP(2x2)
Pins
6
In stock
13,344 at JLCPCB (C2842395)
Used on
10 open-source boards

Overview

The TPS61099DRV is a DC DC Converter made by Texas Instruments in a WSON-6-EP(2x2) package with 7 pins. -40℃~+150℃@(TJ) 1 1.8V~5.5V 700mV~5.5V Adjustable Boost Boost Built-in Yes WSON-6-EP(2x2) DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:TPS61099DRV, from KiCad's library) and its footprint (Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm, from KiCad's library), ready for a KiCad board. 13,344 are in stock at JLCPCB (part C2842395). 10 open-source boards in 10 repositories on GitHub use it.

Symbol

1GND2VOUT3FB4EN5SW6VI
Regulator_Switching:TPS61099DRVFrom KiCad's library

Footprint

1234567
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mmFrom KiCad's library

From the datasheet

14
Supply, least
700 mV · VIN, recommended operating min · p. 4
Supply, most
5.5 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
6 V · VIN, absolute max · p. 4
Junction, hottest
150 °C · junction temperature absolute max · p. 4
Takes working
1 µA · sum of VIN and VOUT quiescent currents, enabled without load or switching, typical · p. 5
Takes asleep
500 nA · VIN shutdown current, VIN = 3.7V, VOUT = 0V, typical · p. 5
Gives
300 mA · output current, 3.3V to 5V conversion, max · p. 1
Feedback reference
1 V · feedback reference, VIN < VOUT, PWM mode, typical · p. 5
Feedback reference
1.03 V · feedback reference, VIN < VOUT, PFM mode, typical · p. 5
Current limit
1 A · switch current limit, VOUT ≥ 2.5V, boost operation, typical · p. 5
Current limit
750 mA · switch current limit, VOUT < 2.5V, boost operation, typical · p. 5
Junction to air (DRV(6 PINS, WSON))
71.7 K/W · junction-to-ambient thermal resistance · p. 4
Junction to case (DRV(6 PINS, WSON))
83 K/W · junction-to-case top thermal resistance · p. 4
Junction to board (DRV(6 PINS, WSON))
33.9 K/W · junction-to-board thermal resistance · p. 4

What it is and has

4
Converter topology
Synchronous boost converter · p. 1
Output
Adjustable · p. 3
Shutdown
True disconnection · p. 1
Down mode
Regulated output voltage · p. 1

Around it

3
ind 2.2 µH
between VIN and SW; Nominal recommended inductor; allowed range 0.7 to 2.86 uH. · p. 4
cap 10 µF
between VIN and GND; Nominal recommended input capacitor; minimum 1.0 uF. · p. 4
cap 20 µF
between VOUT and GND; Nominal recommended total output capacitance; allowed range 10 to 100 uF. · p. 4

Specifications

41
ParameterConditionsAs printedPage
Voltage range at terminals(2)VIN, SW, VOUT, FB, EN; over operating free-air temperature rangemin -0.3 · max 6 V4
Operating junction temperature, TJ TJmin -40 · max 150 °C4
Storage temperature range, Tstg Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human Body Model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins(1); value ±2000 Vmax 2000 V4
Electrostatic discharge V(ESD)Charged Device Model (CDM), per JEDEC specification JESD22C101, all pins(2); value ±500 Vmax 500 V4
Input voltage range VINmin 0.7 · max 5.5 V4
Output voltage range VOUTmin 1.8 · max 5.5 V4
Inductor LNOM column recorded as typmin 0.7 · typ 2.2 · max 2.86 uH4
Input capacitor CINNOM column recorded as typmin 1 · typ 10 uF4
Output capacitor COUTNOM column recorded as typmin 10 · typ 20 · max 100 uF4
Operating virtual junction temperature TJmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJADRV(6 PINS, WSON)typ 71.7 °C/W4
Junction-to-case (top) thermal resistance RθJCtopDRV(6 PINS, WSON)typ 83 °C/W4
Junction-to-board thermal resistance RθJBDRV(6 PINS, WSON)typ 33.9 °C/W4
Junction-to-top characterization parameter ψJTDRV(6 PINS, WSON)typ 2.7 °C/W4
Junction-to-board characterization parameter ψJBDRV(6 PINS, WSON)typ 33.4 °C/W4
Junction-to-case (bottom) thermal resistance RθJCbotDRV(6 PINS, WSON)typ 14.4 °C/W4
Input voltage range VINTPS61099xmin 0.7 · max 5.5 V5
Input under voltage lockout threshold VUVLOTPS61099x; VIN risingtyp 0.6 · max 0.7 V5
UVLO hysteresisTPS61099xtyp 200 mV5
Quiescent current into VIN pin IQTPS61099x; IC enabled, no Load, no Switching; TJ = -40°C to 85°Ctyp 0.4 · max 1.1 uA5
Quiescent current into VOUT pin IQTPS61099x; IC enabled, no Load, no Switching, Boost or Down Mode; TJ = -40°C to 85°Ctyp 0.6 · max 1.5 uA5
Shutdown current into VIN pin ISDTPS61099x; IC disabled, VIN = 3.7V, VOUT = 0V; TJ = -40°C to 85°Ctyp 0.5 · max 1.6 uA5
Output voltage range VOUTTPS61099min 1.8 · max 5.5 V5
Feedback reference voltage VREFTPS61099; VIN < VOUT, PWM modemin 0.98 · typ 1 · max 1.02 V5
Feedback reference voltage VREFTPS61099; VIN < VOUT, PFM modetyp 1.03 V5
Output overvoltage protection threshold VOVPTPS61099x; VOUT risingmin 5.6 · typ 5.8 · max 6 V5
OVP hysteresisTPS61099xtyp 100 · max 200 mV5
Leakage current into FB pin IFB_LKGTPS61099x; VFB = 1.0Vtyp 10 · max 50 nA5
Low side switch on resistance RDS(on)_LSTPS61099x; VOUT = 5.0Vtyp 250 mΩ5
Low side switch on resistance RDS(on)_LSTPS61099x; VOUT = 3.3Vtyp 300 mΩ5
Low side switch on resistance RDS(on)_LSTPS61099x; VOUT = 1.8Vtyp 400 mΩ5
Rectifier on resistance RDS(on)_HSTPS61099x; VOUT = 5.0Vtyp 300 · max 350 mΩ5
Rectifier on resistance RDS(on)_HSTPS61099x; VOUT = 3.3Vtyp 350 · max 450 mΩ5
Rectifier on resistance RDS(on)_HSTPS61099x; VOUT = 1.8Vtyp 500 · max 750 mΩ5
Inductor current ripple ILHTPS61099x; VOUT = 5.0Vtyp 350 mA5
Inductor current ripple ILHTPS61099x; VOUT = 3.3Vtyp 300 mA5
Inductor current ripple ILHTPS61099x; VOUT = 1.8Vtyp 250 mA5
Current limit threshold ILIMTPS61099x; VOUT ≥ 2.5V, boost operationmin 0.8 · typ 1 · max 1.25 A5
Current limit threshold ILIMTPS61099x; VOUT < 2.5V, boost operationmin 0.5 · typ 0.75 A5
Leakage current into SW pin (from SW pin to GND) ISW_LKGTPS61099x; VSW = 5.0V, no switch, TJ = –40°C to 85°Cmax 200 nA5

Pins, by the datasheet

7
1 GND
Ground. · p. 3
2 VOUT
Boost converter output. · p. 3
3 FB
Voltage feedback; connect to the center tap of a resistor divider to program the output voltage. · p. 3
4 EN
Logic high enables the device; logic low disables it. Do not leave floating. · p. 3
5 SW
Converter switch pin; connect to the inductor. · p. 3
6 VIN
IC power supply input. · p. 3
7 PowerPAD™
Connect to GND. · p. 3

Open-source boards using it

10See all 10
  • 4 layers7 × 12 mmSensor implant, the printed circuit board in 3D

    Sensor implant

    lucysrausch/sensor-implant

    WIP hardware design files for a sensor implant for my bachelors thesis.

    143 parts5MIT
  • 4 layersEigentime32, the printed circuit board in 3D

    Eigentime32

    captainchapster/Eigentime32

    A self-contained pocket watch that keeps its own time for a decade. No GPS, one coin cell, one PCB.

    53 parts1
  • 4 layers42.5 × 25 mmHost usb pmod, the printed circuit board in 3D

    Host usb pmod

    sparkengineering/host-usb-pmod

    USB type A receptacle to Digilent Pmod™ breakout board

    15 parts1CERN-OHL-P-2.0
  • 4 layers70 × 52 mmPager carrier rev a, the printed circuit board in 3D

    Pager carrier rev a

    vyquocvu/analog-ai-chip

    This directory contains the editable KiCad 10 source for the 70 mm × 52 mm, four-layer Pager-1 main carrier. The display, keypad, protected Li-Po pack, and analog accelerator are external assemblies.

    32 parts1MIT
  • 2 layers120 × 100 mmInoovatest Sub, the printed circuit board in 3D

    Inoovatest Sub

    jcchincheong-bb/Verificationator_GP-WS25-26

    Files for Group Project WS2526

    115 parts
  • 2 layers78 × 84 mmQPoint, the printed circuit board in 3D

    QPoint

    lysolaka/QPoint

    A not too simple BJT measurement device.

    146 partsGPL-3.0
  • 4 layers157 × 105 mmFLoggy, the printed circuit board in 3D

    FLoggy

    markovejnovic/FLoggy

    Open source/hardware data collection platform

    212 parts
  • 4 layersLora node, the printed circuit board in 3D

    Lora node

    Mehdi-Ldj/lora-ble-sensor-node

    Off-grid LoRa/BLE sensor node — 868 MHz LoRa, 2.4 GHz BLE, solar/LiFePO4

    110 partsCERN-OHL-P-2.0

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the TPS61099DRV?

Yes. The symbol is Regulator_Switching:TPS61099DRV and the footprint Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS61099DRV?

WSON-6-EP(2x2), with 7 pins. Its footprint is drawn on this page.

Where is the TPS61099DRV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS61099DRV?

JLCPCB lists it as part C2842395, with 13,344 in stock; the sellers' links on this page open their listings.

What can replace the TPS61099DRV?

Parts like it in the library: the TPS610995DRV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS61099DRV?

10 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.