
Lower Sensor
lucysrausch/sensor-implant
WIP hardware design files for a sensor implant for my bachelors thesis.

WIP hardware design files for a sensor implant for my bachelors thesis.
Sensor implant is an open-source printed circuit board by lucysrausch, from the lucysrausch/sensor-implant repository on GitHub, published under the MIT licence. It is a 4-layer board of 7 × 12 mm with 143 parts on 131 nets, routed with 1,533 tracks and 247 vias.
It is built around the PE4259-63, LPV542DGK and TPS61099DRV, with the TMUX1209PW and CSD75208W1015 among its other parts. Its parts include 50 capacitors, 43 resistors, 20 connectors, 13 ICs and 9 inductors. It belongs with the sensors and measurement boards and the STM32 boards of this library.
WIP hardware design files for a sensor implant for my bachelors thesis.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100 | Resistor_SMD:R_0201_0603Metric | R1, R2, R3, R10, R14, R15, R16, R18, R19, R23, R27, R30, R33, R36, R37, R38 +2 |
| 18 | PAD | TestPoint:TestPoint_Pad_D1.0mm | J1, J2, J3, J4, J5, J6, J7, J10, J13, J14, J15, J16, J17, J18, J19, J20 +2 |
| 16 | 1n | Capacitor_SMD:C_0201_0603Metric | C1, C15, C20, C21, C22, C23, C25, C26, C27, C29, C30, C31, C32, C38, C39, C40 |
| 11 | 100n | Capacitor_SMD:C_0201_0603Metric | C2, C5, C24, C28, C34, C35, C37, C41, C42, C43, C44 |
| 8 | 10k | Resistor_SMD:R_0201_0603Metric | R4, R11, R17, R26, R34, R35, R39, R42 |
| 6 | 200k | Resistor_SMD:R_0201_0603Metric | R6, R9, R12, R21, R25, R28 |
| 5 | 10u | Capacitor_SMD:C_0603_1608Metric | C45, C46, C47, C48, C49 |
| 5 | 2k | Resistor_SMD:R_0201_0603Metric | R7, R13, R22, R29, R40 |
| 4 | 10M | Resistor_SMD:R_0201_0603Metric | R20, R24, R31, R32 |
| 4 | TMUX1209 | footrpints:QFN40P260X180X55-16N | U5, U8, U11, U12 |
| 3 | 1u | Capacitor_SMD:C_0201_0603Metric | C9, C13, C16 |
| 3 | 1u | Capacitor_SMD:C_0402_1005Metric | C33, C36, C50 |
| 3 | CSD75208W1015 | footrpints:WLCSP-6_1.4x1.0mm_P0.4mm | Q1, Q2, Q3 |
| 2 | 1.8p | Capacitor_SMD:C_0201_0603Metric | C12, C17 |
| 2 | 18p | Capacitor_SMD:C_0201_0603Metric | C18, C19 |
| 2 | 3.3p | Capacitor_SMD:C_0201_0603Metric | C10, C11 |
| 2 | 9.1n | Inductor_SMD:L_0201_0603Metric | L4, L6 |
| 2 | Conn_02x05_Odd_Even_MountingPin | DF37NB-10DS-0.4V(53):DF37NB10DS04V53 | J11, J12 |
| 2 | DNP | Resistor_SMD:R_0201_0603Metric | R41, R43 |
| 2 | LPV542 | Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm | U6, U9 |
| 1 | 12p | Capacitor_SMD:C_0201_0603Metric | C4 |
| 1 | 15u | Inductor_SMD:L_0603_1608Metric | L5 |
| 1 | 18n | Inductor_SMD:L_0201_0603Metric | L8 |
| 1 | 1p | Capacitor_SMD:C_0201_0603Metric | C14 |
| 1 | 2.7n | Inductor_SMD:L_0201_0603Metric | L3 |
| 1 | 22p | Capacitor_SMD:C_0201_0603Metric | C8 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-323_SC-70 | Q4 |
| 1 | 2u2 | Inductor_SMD:L_0603_1608Metric | L9 |
| 1 | 32MHz | Crystal:Crystal_SMD_EuroQuartz_X22-4Pin_2.5x2.0mm | Y1 |
| 1 | 3p | Capacitor_SMD:C_0201_0603Metric | C3 |
| 1 | 47n | Inductor_SMD:L_0201_0603Metric | L1 |
| 1 | 6.8p | Capacitor_SMD:C_0201_0603Metric | C6 |
| 1 | D | Diode_SMD:D_SC-80 | D1 |
| 1 | DNP | Capacitor_SMD:C_0201_0603Metric | C7 |
| 1 | DNP | Inductor_SMD:L_0402_1005Metric | L7 |
| 1 | D_TVS | Diode_SMD:D_SC-80 | D2 |
| 1 | FERRET | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | LMT70 | footrpints:WLCSP-4_1.0x1.0mm_P0.4mm | U7 |
| 1 | OPA333xxDCK | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U13 |
| 1 | PE4259 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U2 |
| 1 | REF3020 | Package_TO_SOT_SMD:SOT-323_SC-70 | U3 |
| 1 | STM32L072CBYx | Package_CSP:ST_WLCSP-49_Die447 | U4 |
| 1 | SX1261 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias | U1 |
| 1 | TPS61099 | footrpints:WLCSP-6_1.4x1.0mm_P0.4mm_hdi | U10 |
The 142 most common of 143 parts.

lucysrausch/sensor-implant
WIP hardware design files for a sensor implant for my bachelors thesis.

lucysrausch/sensor-implant
WIP hardware design files for a sensor implant for my bachelors thesis.

lucysrausch/sensor-implant
WIP hardware design files for a sensor implant for my bachelors thesis.

lucysrausch/sensor-implant
WIP hardware design files for a sensor implant for my bachelors thesis.

lucysrausch/sensor-implant
WIP hardware design files for a sensor implant for my bachelors thesis.

lucysrausch/sensor-implant
WIP hardware design files for a sensor implant for my bachelors thesis.


captainchapster/Eigentime32
A self-contained pocket watch that keeps its own time for a decade. No GPS, one coin cell, one PCB.

sparkengineering/host-usb-pmod
USB type A receptacle to Digilent Pmod™ breakout board

vyquocvu/analog-ai-chip
This directory contains the editable KiCad 10 source for the 70 mm × 52 mm, four-layer Pager-1 main carrier. The display, keypad, protected Li-Po pack, and analog accelerator are external assemblies.




Mehdi-Ldj/lora-ble-sensor-node
Off-grid LoRa/BLE sensor node — 868 MHz LoRa, 2.4 GHz BLE, solar/LiFePO4
It measures 7 × 12 mm and has 4 copper layers, 0.6 mm thick.
143 parts, built around the PE4259-63, LPV542DGK, TPS61099DRV and TMUX1209PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lucysrausch/sensor-implant repository on GitHub, at the commit this page was made from: the board is hardware/pcbs/mainboard/mainboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).