Skip to the content
12345

TPS61041DBV

Texas InstrumentsExtended

-40℃~+125℃@(TJ) 1 1.8V~6V 1MHz 250mA 28V 28uA Adjustable Boost Boost Built-in No SOT-23-5 DC-DC Converters ROHS

Part id
ti/TPS61041DBV
Category
LED Drivers
Package
SOT-23-5
Pins
5
In stock
29,022 at JLCPCB (C9846)
Used on
17 open-source boards

Overview

The TPS61041DBV is a LED Driver made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(TJ) 1 1.8V~6V 1MHz 250mA 28V 28uA Adjustable Boost Boost Built-in No SOT-23-5 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:TPS61041DBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 29,022 are in stock at JLCPCB (part C9846). 17 open-source boards in 15 repositories on GitHub use it.

Symbol

1SW2GND3FB4EN5VIN
Regulator_Switching:TPS61041DBVFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

13
Supply, least
1.8 V · VIN, recommended operating min · p. 4
Supply, most
6 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
7 V · VIN, absolute max · p. 4
Works from
-40 °C · Operating ambient temperature min · p. 4
Works up to
85 °C · Operating ambient temperature max · p. 4
Junction, hottest
150 °C · Junction temperature absolute max · p. 4
Takes working
28 µA · VIN quiescent typical, IOUT = 0mA, not switching, VFB = 1.3V · p. 5
Takes asleep
100 nA · Shutdown current typical, EN = GND · p. 5
Current limit
250 mA · TPS61041 MOSFET current limit typical · p. 5
Feedback reference
1.233 V · Internal voltage reference typical · p. 5
Junction to air (DBV)
205.2 K/W · TPS61041 junction-to-ambient thermal resistance · p. 4
Junction to board (DBV)
34.8 K/W · TPS61041 junction-to-board thermal resistance · p. 4
Junction to case (DBV)
118.3 K/W · TPS61041 junction-to-case top thermal resistance · p. 4

What it is and has

7
Input voltage range
1.8V to 6V · p. 1
Output voltage
Adjustable up to 28V · p. 1
Internal switch current
250mA · p. 1
Switching frequency
Up to 1MHz · p. 1
Soft start
Internal · p. 1
Protection
Undervoltage lockout · p. 10
Protection
Thermal shutdown, typically 168°C with 25°C hysteresis · p. 10

Around it

3
cap 4.7 μF
between VIN and GND; Recommended nominal input capacitor. · p. 4
cap 1 μF
between VOUT and GND; Recommended minimum output capacitor. · p. 4
ind 10 μH
between VIN and SW; Recommended nominal inductor; minimum 2.2 uH. · p. 4

Specifications

39
ParameterConditionsAs printedPage
Supply voltages on pin VINOver operating free-air temperature range; with respect to groundmin -0.3 · max 7 V4
Voltages on pins EN, FBOver operating free-air temperature range; maximum VIN + 0.3 V; with respect to groundmin -0.3 V4
Switch voltage on pin SWOver operating free-air temperature range; with respect to groundmin -0.3 · max 30 V4
Operating junction temperature TJmin -40 · max 150 °C4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±2000 Vmin -2000 · max 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22C101; ±750 Vmin -750 · max 750 V4
Input voltage range VINmin 1.8 · max 6 V4
Output voltage range VOUTmax 28 V4
Inductor LSee application section; nominal value in typmin 2.2 · typ 10 uH4
Switching frequency fSee application sectionmax 1 MHz4
Input capacitor CINSee application section; nominal value in typtyp 4.7 uF4
Output capacitor COUTSee application sectionmin 1 uF4
Operating ambient temperature TAmin -40 · max 85 °C4
Operating junction temperature TJmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJATPS61041, DBV, 5 PINStyp 205.2 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)TPS61041, DBV, 5 PINStyp 118.3 °C/W4
Junction-to-board thermal resistance RθJBTPS61041, DBV, 5 PINStyp 34.8 °C/W4
Junction-to-top characterization parameter ψJTTPS61041, DBV, 5 PINStyp 12.2 °C/W4
Junction-to-board characterization parameter ψJBTPS61041, DBV, 5 PINStyp 33.9 °C/W4
Input voltage range VINVIN = 2.4V, EN = VIN, TA = –40°C to 85°C; typical values at TA = 25°Cmin 1.8 · max 6 V5
Operating quiescent current IQIOUT = 0mA, not switching, VFB = 1.3V; VIN = 2.4V, EN = VIN, TA = –40°C to 85°C; typical at 25°Ctyp 28 · max 50 uA5
Shutdown current ISDEN = GND; VIN = 2.4V, TA = –40°C to 85°C; typical at 25°Ctyp 0.1 · max 1 uA5
Undervoltage lockout threshold VUVLOEN = VIN, TA = –40°C to 85°C; typical at 25°Ctyp 1.5 · max 1.7 V5
EN high level input voltage VIHVIN = 2.4V, TA = –40°C to 85°Cmin 1.3 V5
EN low level input voltage VILVIN = 2.4V, TA = –40°C to 85°Cmax 0.4 V5
EN input leakage current IIEN = GND or VIN; VIN = 2.4V, TA = –40°C to 85°C; typical at 25°Ctyp 0.1 · max 1 uA5
Maximum switch voltage VswVIN = 2.4V, EN = VIN, TA = –40°C to 85°Cmax 30 V5
Minimum off time toffVIN = 2.4V, EN = VIN, TA = –40°C to 85°C; typical at 25°Cmin 250 · typ 400 · max 550 ns5
Maximum on time tonVIN = 2.4V, EN = VIN, TA = –40°C to 85°C; typical at 25°Cmin 4 · typ 6 · max 7.5 us5
MOSFET on-resistance RDS(on)VIN = 2.4V; ISW = 200mA; TPS61041; EN = VIN, TA = –40°C to 85°C; typical at 25°Ctyp 750 · max 1250 mΩ5
MOSFET leakage currentVSW = 28V; VIN = 2.4V, EN = VIN, TA = –40°C to 85°C; typical at 25°Ctyp 1 · max 10 uA5
MOSFET current limit ILIMTPS61041; VIN = 2.4V, EN = VIN, TA = –40°C to 85°C; typical at 25°Cmin 215 · typ 250 · max 285 mA5
Adjustable output voltage range VOUTMinimum VIN; VIN = 2.4V, EN = VIN, TA = –40°C to 85°Cmax 28 V5
Internal voltage reference VrefVIN = 2.4V, EN = VIN, TA = –40°C to 85°C; typical at 25°Ctyp 1.233 V5
Feedback input bias current IFBVFB = 1.3V; VIN = 2.4V, EN = VIN, TA = –40°C to 85°Cmax 1 uA5
Feedback trip point voltage VFB1.8V ≤ VIN ≤ 6V; EN = VIN, TA = –40°C to 85°C; typical at 25°Cmin 1.208 · typ 1.233 · max 1.258 V5
Line regulation1.8V ≤ VIN ≤ 6V; VOUT = 18V; Iload = 10mA; CFF = not connected; EN = VIN, typical at TA = 25°Ctyp 0.05 %/V5
Load regulationVIN = 2.4V; VOUT = 18V; 0mA ≤ IOUT ≤ 30mA; EN = VIN, typical at TA = 25°Ctyp 0.15 %/mA5

Pins, by the datasheet

5
1 SW
Switch pin connected to the internal power MOSFET drain; connect the inductor and Schottky diode. · p. 3
2 GND
Ground. · p. 3
3 FB
Feedback input; connect to an external voltage divider to program the output voltage. · p. 3
4 EN
Enable input; pulling to ground forces shutdown. Must be terminated and not left floating. · p. 3
5 VIN
Supply voltage pin. · p. 3

Open-source boards using it

17See all 17
  • 2 layers51 × 71 mmOTThing, the printed circuit board in 3D

    OTThing

    Phunkafizer/OT-Thing

    A compact universal OpenTherm WiFi Interface

    111 parts28
  • 2 layers44.9 × 47.2 mmIsc0901b0-breakout, the printed circuit board in 3D

    Isc0901b0-breakout

    festlv/isc0901b0-breakout

    Simple breakout board for ISC0901B0 sensor

    60 parts15MIT
  • 2 layers80 × 50 mmEink clock, the printed circuit board in 3D

    Eink clock

    kaini/eink-clock

    Source code and schematics for a clock using the ED060SC4 E-Ink display

    81 parts11MIT
  • 6 layers44 × 118 mm3210retro test, the printed circuit board in 3D

    3210retro test

    DasBasti/NokiaRetroFit

    Retrofitting a Nokia 3210 with modern Processor

    195 parts9Apache-2.0
  • 2 layers67.4 × 54.3 mmWiFiMaster, the printed circuit board in 3D

    WiFiMaster

    Phunkafizer/AllSerial

    An universal sophisticated USB-serial converter

    63 parts6MIT
  • 4 layers28 × 28 mmAdapter, the printed circuit board in 3D

    Adapter

    benklop/screen-adapter

    This directory contains documentation and configuration files for supporting a 720x720 DSI display with FL7707N controller.

    9 parts4
  • 4 layers28 × 28 mmAdapter, the printed circuit board in 3D

    Adapter

    Calculinux/DSI-screen-adapter

    An adapter to use a 4 inch DSI display in the picocalc with the Luckfox Lyra

    8 parts2
  • 2 layers10.5 × 9 mmTPS61041 BOOST CONVERTER, the printed circuit board in 3D

    TPS61041 BOOST CONVERTER

    aks0521/Boost-Converter-

    A small step-up (boost) converter board built around the Texas Instruments TPS61041, designed from schematic to PCB layout in KiCad.

    8 parts

Questions

Is there a KiCad symbol and footprint for the TPS61041DBV?

Yes. The symbol is Regulator_Switching:TPS61041DBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS61041DBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the TPS61041DBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS61041DBV?

JLCPCB lists it as part C9846, with 29,022 in stock; the sellers' links on this page open their listings.

Which open-source boards use the TPS61041DBV?

17 boards in 15 repositories on GitHub; the most starred are listed on this page, with their KiCad files.