Skip to the content
123456789

TPS56528DDA

Texas InstrumentsExtended

-40℃~+85℃@(TA) 1 4.5V~18V 600mV~7V 650kHz Adjustable Buck Buck Built-in Yes HSOP-8-EP DC-DC Converters ROHS

Part id
ti/TPS56528DDA
Category
DC DC Converters
Package
HSOP-8-EP
Pins
8
In stock
0 at JLCPCB (C111846)
Used on
11 open-source boards

Overview

The TPS56528DDA is a DC DC Converter made by Texas Instruments in a HSOP-8-EP package with 9 pins. -40℃~+85℃@(TA) 1 4.5V~18V 600mV~7V 650kHz Adjustable Buck Buck Built-in Yes HSOP-8-EP DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:TPS56528DDA, from KiCad's library) and its footprint (Package_SO:Texas_HSOP-8-1EP_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C111846). 11 open-source boards in 10 repositories on GitHub use it.

Symbol

3VREG54PG1EN2VFB5GND6SW7VBST8VIN
Regulator_Switching:TPS56528DDAFrom KiCad's library

Footprint

123456789
Package_SO:Texas_HSOP-8-1EP_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

9
The pins of the TPS56528DDA
PinNameType
1ENInput
2VFBInput
3VREG5Output
4PGOpen collector
5GNDPower in
6SWOutput
7VBSTPassive
8VINPower in
9GNDPassive

Open-source boards using it

11See all 11
  • 4 layers85 × 56 mmAmr stm32 kicad, the printed circuit board in 3D

    Amr stm32 kicad

    hongtannnn/amr_stm32

    AMR Hardware & PCB Design: Low-level controller board and hardware system (STM32 / KiCad) engineered as the foundation for future ROS 2, SLAM, and autonomous navigation integration.

    96 parts2
  • 2 layers125 × 78.2 mmRC ESP32 V2, the printed circuit board in 3D

    RC ESP32 V2

    Poent/RC-Snowblower

    Working on designing the impeller and auger portion of the snowblower. Switched from using a worm gear assembly to a custom ring and pinion setup using a spiral bevel gear.

    84 parts2
  • 8 layers50 × 50 mmINT R1.0.1, the printed circuit board in 3D

    INT R1.0.1

    manyetox/Autonomous-Photonics-Carrier

    Source-available modular mobile carrier for autonomous photonics experiments using ESP32 control, optical flow, IMU sensing and magnetic wheel encoding.

    182 parts1
  • 4 layers58.7 × 31 mmPowerBoardToid, the printed circuit board in 3D

    PowerBoardToid

    codujla/PowerBoard

    Power management board that converts a 4S Li-ion battery into multiple regulated voltage rails using integrated DC-DC converters, with built-in protection against overvoltage, overcurrent, and reverse polarity.

    31 parts
  • 2 layers65 × 56 mmCARL Air Brake Power Supply Hardware, the printed circuit board in 3D

    CARL Air Brake Power Supply Hardware

    Kenneth-Goveas/CARL-Air-Brake-Power-Supply-Hardware

    This repository contains the electronic hardware design for the power supply module of the [CARL Air Brake][cab-repo] computer.

    90 parts
  • 8 layers50 × 46.2 mmRobot aio esp32 manuel solder 8 layer, the printed circuit board in 3D

    Robot aio esp32 manuel solder 8 layer

    manyetox/ESP32-Robot-AIO-Controller

    Compact 8-layer ESP32 robot controller with 4 independent brushed DC motor drivers, onboard power regulation, battery monitoring and expansion GPIO. Designed for RC cars, mobile robots and combat robotics.

    59 parts
  • 6 layers51.8 × 113.8 mmHUMA Rocket Flight Computer, the printed circuit board in 3D

    HUMA Rocket Flight Computer

    manyetox/HUMA-Rocket-Flight-Computer

    Unfinished STM32H7-based rocket flight computer with redundant IMUs and barometers, high-g and vibration sensing, microSD black-box logging, 915 MHz LoRa telemetry, analog OSD, expansion I/O, and recovery outputs.

    153 parts

Questions

Is there a KiCad symbol and footprint for the TPS56528DDA?

Yes. The symbol is Regulator_Switching:TPS56528DDA and the footprint Package_SO:Texas_HSOP-8-1EP_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS56528DDA?

HSOP-8-EP, with 9 pins. Its footprint is drawn on this page.

Where is the TPS56528DDA datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS56528DDA?

JLCPCB lists it as part C111846, with 0 in stock; the sellers' links on this page open their listings.

Which open-source boards use the TPS56528DDA?

11 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.