Skip to the content
11

TPS2561DRC

Texas InstrumentsExtended

-40℃~+125℃ 2 2.5V~6.5V 2.8A 44mΩ Active High High Side Switch Overcurrent Protection(OCP)、Over Temperature Protection VSON-10-EP(3x3) Power Distribution Switches ROHS

Part id
ti/TPS2561DRC
Category
Power Distribution Switches
Package
VSON-10-EP(3x3)
Pins
11
In stock
4,313 at JLCPCB (C140303)
Used on
7 open-source boards

Overview

The TPS2561DRC is a power Distribution Switche made by Texas Instruments in a VSON-10-EP(3x3) package with 11 pins. -40℃~+125℃ 2 2.5V~6.5V 2.8A 44mΩ Active High High Side Switch Overcurrent Protection(OCP)、Over Temperature Protection VSON-10-EP(3x3) Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (Interface_USB:TPS2561, from KiCad's library) and its footprint (Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm, from KiCad's library), ready for a KiCad board. 4,313 are in stock at JLCPCB (part C140303). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

1GND2IN3IN4EN15EN26FAULT27ILM8OUT29OUT110FAULT111PAD
Interface_USB:TPS2561From KiCad's library

Footprint

11
Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mmFrom KiCad's library

Pinout

11
The pins of the TPS2561DRC
PinNameType
1GNDPower in
2INPower in
3INPower in
4EN1Input
5EN2Input
6FAULT2Output
7ILMOutput
8OUT2Output
9OUT1Output
10FAULT1Output
11PADPower in

Open-source boards using it

7
  • 4 layers65 × 30 mmComposite vr, the printed circuit board in 3D

    Composite vr

    alanbog/Composite-VR-PCB

    Controller board for CRT-based VR headset

    208 partsCERN-OHL-P-2.0
  • 4 layers35.2 × 50 mmUSB OverDrive, the printed circuit board in 3D

    USB OverDrive

    hanaeatsplanes/USB-OverDrive

    This uses: TUSB4041l as the main Hub 3x LP5912 as an LDO A male USB-C plug (JAE DX07P024AJ1) no need to worry about cables

    91 parts
  • 4 layers61.4 × 45.8 mmUsb hub, the printed circuit board in 3D

    Usb hub

    Keyaan-07/GigaHub

    I made this project just for fun and because i had some free time. I could've made USB 2.0 hub but this was a bit challenging thus i made this!!

    75 partsMIT
  • 6 layers98 × 97 mmOvc5, the printed circuit board in 3D

    Ovc5

    osrf/ovc

    the Open Vision Computer

    202 parts207Apache-2.0
  • 4 layers214.1 × 131.7 mmQsic, the printed circuit board in 3D

    Qsic

    dabridgham/QSIC-verilog

    QBUS Storage and I/O Card

    186 parts11
  • 2 layers88.9 × 76.2 mmCnc hmi usb power, the printed circuit board in 3D

    Cnc hmi usb power

    tangentaudio/pico-cnc-hmi

    Raspberry Pi Pico HMI for LinuxCNC using USB Raw HID

    95 parts3
  • 2 layers32.5 × 16.6 mmVersion current, the printed circuit board in 3D

    Version current

    oomlout/oomlout_oomp_project_src

    25 parts

Parts like it

7

Questions

Is there a KiCad symbol and footprint for the TPS2561DRC?

Yes. The symbol is Interface_USB:TPS2561 and the footprint Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS2561DRC?

VSON-10-EP(3x3), with 11 pins. Its footprint is drawn on this page.

Where is the TPS2561DRC datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS2561DRC?

JLCPCB lists it as part C140303, with 4,313 in stock; the sellers' links on this page open their listings.

What can replace the TPS2561DRC?

Parts like it in the library: the TPS2560DRC by Texas Instruments, the TPS2592AADRCR by Texas Instruments, the TPS2561ADRCR by Texas Instruments and the TPS2560ADRC by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS2561DRC?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.