2 layers88.9 × 76.2 mm
Cnc hmi usb power
tangentaudio/pico-cnc-hmi
Raspberry Pi Pico HMI for LinuxCNC using USB Raw HID
95 parts3
4 layers35.2 × 50 mm
USB OverDrive
hanaeatsplanes/USB-OverDriveThis uses: TUSB4041l as the main Hub 3x LP5912 as an LDO A male USB-C plug (JAE DX07P024AJ1) no need to worry about cables
- Size
- 35.2 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 91
- Nets
- 83
- Pads
- 417
- Tracks, vias
- 429, 110
- Pours
- 169
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Jun 2026
- Updated
- 24 Jul 2026
Overview
USB OverDrive is an open-source printed circuit board by hanaeatsplanes, from the hanaeatsplanes/USB-OverDrive repository on GitHub. It is a 4-layer board of 35.2 × 50 mm with 91 parts on 83 nets, routed with 429 tracks and 110 vias.
It is built around the TUSB4041IPAP and TPS2561DRC. Its parts include 42 capacitors, 18 resistors, 6 ICs, 4 connectors and 1 crystal.
Main components
2
TUSB4041IPAP
HTQFP-64(10x10)-40℃~+85℃ 0.99V~1.26V、3V~3.6V 225mA 33mA 4 Hub I2C、SMBus USB 2.0 HTQFP-64(10x10) USB HUB Controllers ROHSTexas InstrumentsUSB Converters
TPS2561DRC
VSON-10-EP(3x3)-40℃~+125℃ 2 2.5V~6.5V 2.8A 44mΩ Active High High Side Switch Overcurrent Protection(OCP)、Over Temperature Protection VSON-10-EP(3x3) Power Distribution Switches ROHSTexas InstrumentsPower Distribution Switches
README
README.mdUSB OverDrive
youll never need another dongle
What even is this??
This is a USB-C -> 3x USB-A hub!
This uses:
- TUSB4041l as the main Hub
- 3x LP5912 as an LDO
- A male USB-C plug (JAE DX07P024AJ1) no need to worry about cables
Why does this exist??
This project was funded by Hack Club Outpost!
As a MacBook user, I deseperately need a dongle. I decided to design my own Hack Club themed dongle!
Images
Parts
91| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C14, C16, C17, C26, C27, C28, C29, C30, C31, C32, C33, C34, C35, C36, C38 +7 |
| 15 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** |
| 7 | 1uF | Capacitor_SMD:C_0402_1005Metric | C4, C7, C10, C12, C22, C23, C24 |
| 5 | 1M | Resistor_SMD:R_0402_1005Metric | R2, R3, R17, R18, R19 |
| 5 | 220 @ 100 MHz | Inductor_SMD:L_0201_0603Metric | FB1, FB2, FB3, FB4, FB5 |
| 4 | 0.001uF | Capacitor_SMD:C_0402_1005Metric | C3, C54, C55, C56 |
| 3 | 10K 0402 5% | Resistor_SMD:R_0402_1005Metric | R6, R7, R8 |
| 3 | 10uF | Capacitor_SMD:C_0402_1005Metric | C1, C25, C37 |
| 3 | 150uF | Capacitor_SMD:C_1206_3216Metric | C18, C20, C21 |
| 3 | 4.7K 0402 5% | Resistor_SMD:R_0402_1005Metric | R13, R14, R15 |
| 3 | USB_A | easyeda2kicad:USB-A-TH_C42622 | J5, J6, J7 |
| 2 | 18pF | Capacitor_SMD:C_0402_1005Metric | C11, C13 |
| 2 | 25.5K 0402 5% | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | TPS2561 | Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm_ThermalVias | U3, U4 |
| 1 | 1.2V | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | U5 |
| 1 | 10K 0402 1% | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 3.3V | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | U2 |
| 1 | 4.7K | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 5.0V | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | U1 |
| 1 | 5.1K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 9.53K 0402 1% | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 90.9K 0402 1% | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | TUSB4041I | Package_QFP:HTQFP-64-1EP_10x10mm_P0.5mm_EP8x8mm_Mask4.4x4.4mm_ThermalVias | U7 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Plug_JAE_DX07P024AJ1 | P2 |
Similar boards
- 6 layers125 × 125 mm
Libreboard broken
256foundation/libreboard
Open Source Bitcoin Mining Control Board
193 parts21CERN-OHL-S-2.0 - 6 layers90.2 × 95.9 mm
Cubesat rp2040
macnetic/rp2040-cubesat
A CubeSat Onboard Computer, using the RP2040 microcontroller.
215 parts4 - 6 layers110 × 71 mm
- 2 layers70 × 79 mm
- 4 layers65 × 30 mm
Composite vr
alanbog/Composite-VR-PCB
Controller board for CRT-based VR headset
208 partsCERN-OHL-P-2.0 - 4 layers61.4 × 45.8 mm
Usb hub
Keyaan-07/GigaHub
I made this project just for fun and because i had some free time. I could've made USB 2.0 hub but this was a bit challenging thus i made this!!
75 partsMIT - 6 layers98 × 97 mm
Questions
How big is the USB OverDrive PCB?
It measures 35.2 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the USB OverDrive use?
91 parts, built around the TUSB4041IPAP and TPS2561DRC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USB OverDrive KiCad files?
From the hanaeatsplanes/USB-OverDrive repository on GitHub, at the commit this page was made from: the board is USB OverDrive.kicad_pcb and its schematic USB OverDrive.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the USB OverDrive design in my own project?
Its repository states no licence, so its author keeps all rights: ask hanaeatsplanes before reusing the design.