Skip to the content
1278

TPS2121RUXT

Texas InstrumentsExtended

-40℃~+125℃@(TJ) 2 2.8V~22V 25uA VQFN-HR-12(2x2.5) Supervisor and Reset ICs ROHS

Part id
ti/TPS2121RUXT
Category
Supervisor And Reset ICs
Package
VQFN-HR-12(2x2.5)
Pins
12
In stock
196 at JLCPCB (C2156025)
Used on
9 open-source boards

Overview

The TPS2121RUXT is a supervisor And Reset IC made by Texas Instruments in a VQFN-HR-12(2x2.5) package with 12 pins. -40℃~+125℃@(TJ) 2 2.8V~22V 25uA VQFN-HR-12(2x2.5) Supervisor and Reset ICs ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TPS2121RUXT, from EasyEDA) and its footprint (EasyEDA_Cloud:VQFN-HR-12_L2.5-W2.0-P0.50-BL, from EasyEDA), ready for a KiCad board. 196 are in stock at JLCPCB (part C2156025). 9 open-source boards in 9 repositories on GitHub use it.

Symbol

12GND11SS10ILM9ST8OUT7IN16PR15OV14OV23CP22IN21OUT
EasyEDA_Cloud:TPS2121RUXTFrom EasyEDA

Footprint

1278
EasyEDA_Cloud:VQFN-HR-12_L2.5-W2.0-P0.50-BLFrom EasyEDA

From the datasheet

15
Supply, least
2.8 V · IN1, IN2, recommended operating min · p. 6
Supply, most
22 V · IN1, IN2, recommended operating max · p. 6
Supply, absolute maximum
24 V · IN1, IN2, absolute max · p. 6
Junction, hottest
125 °C · recommended junction temperature max · p. 6
Takes working
300 µA · INx powering OUT, OUT open, typical · p. 7
Takes asleep
15 µA · INx not powering OUT, VOUT = VINx, 25°C, typical standby · p. 7
Gives
4.5 A · continuous input current rating, max · p. 6
Current limit
5.2 A · RILM = 18.7kΩ, typical · p. 8
Current limit
4.5 A · RILM = 22.1kΩ, typical · p. 8
Current limit
3.5 A · RILM = 29.8kΩ, typical · p. 8
Current limit
2.5 A · RILM = 44.2kΩ, typical · p. 8
Current limit
1.5 A · RILM = 80kΩ, typical · p. 8
Junction to air (RNW (PKG FAM))
72.2 K/W · junction-to-ambient thermal resistance · p. 6
Junction to case (RNW (PKG FAM))
38.5 K/W · junction-to-case top thermal resistance · p. 7
Junction to board (RNW (PKG FAM))
15.4 K/W · junction-to-board thermal resistance · p. 7

What it is and has

8
Operating voltage
2.8 V to 22 V · p. 1
ON resistance
56 mΩ typical · p. 1
Output current limit
Adjustable, 1 A – 4.5 A · p. 1
Channel status indication
ST · p. 1
Input settling time
Adjustable through SS · p. 1
Output soft start time
Adjustable through SS · p. 1
Protection
Over temperature protection · p. 1
Package
VQFN-HR (12), 2.0 mm x 2.5 mm · p. 1

Specifications

59
ParameterConditionsAs printedPage
Maximum Power Pin Voltage VIN1, VIN2, VOUTIN1, IN2, OUTmin -0.3 · max 24 V6
Maximum Overvoltage Pin Voltage VOV1, VOV2OV1, OV2min -0.3 · max 6 V6
Maximum Control Pin Voltage VPRI, VSELPRI, SELmin -0.3 · max 6 V6
Maximum Control Pin Voltage VSTSTmin -0.3 · max 6 V6
Storage temperature TSTGmin -65 · max 150 °C6
Electrostatic discharge VESDAll pins; Human body model (HBM), per ANSI/ESDA/JEDEC JS-001min -2000 · max 2000 V6
Electrostatic discharge VESDAll pins; Charged device model (CDM), per JEDEC specification JESD22-C101min -500 · max 500 V6
Input Voltage Range(1) VIN1, VIN2IN1, IN2min 2.8 · max 22 V6
Output Voltage Range VOUTOUTmin 0 · max 22 V6
Overvoltage Pin Voltage VOV1, VOV2OV1, OV2min 0 · max 5.5 V6
Control Pin Voltage VPRI, VSELPRI, SELmin 0 · max 5.5 V6
Control Pin Voltage VSTSTmin 0 · max 5.5 V6
Status Pin Pull Up Resistance RSTSTmin 6 · max 20 kΩ6
Current Limit Resistance RILMILMmin 18 · max 100 kΩ6
SS Pin Output Voltage VSSSSmax 4 V6
TPS2121 Continuous Input Current IIN1, IIN2TPS2121; IN1, IN2max 4.5 A6
Junction temperature TJmin -40 · max 125 °C6
Junction-to-ambient thermal resistance RθJATPS2121; RNW (PKG FAM), 11 PINStyp 72.2 °C/W6
Junction-to-case (top) thermal resistance RθJC(top)TPS2121; RNW (PKG FAM), 11 PINStyp 38.5 °C/W7
Junction-to-board thermal resistance RθJBTPS2121; RNW (PKG FAM), 11 PINStyp 15.4 °C/W7
Junction-to-top characterization parameter ΨJTTPS2121; RNW (PKG FAM), 11 PINStyp 0.9 °C/W7
Junction-to-board characterization parameter ΨJBTPS2121; RNW (PKG FAM), 11 PINStyp 15.5 °C/W7
Quiescent Current (INx Powering OUT) (1) IQ, INxOUT = Open; TJ = -40°C to 125°Ctyp 300 · max 400 uA7
Standby Current (INx not powering OUT)(1) ISBY, INxVOUT = VINx; TJ = 25°Cmin 0 · typ 15 · max 25 uA7
Standby Current (INx not powering OUT)(1) ISBY, INxVOUT = VINx; TJ = -40°C to 125°Cmax 25 uA7
Leakage Current (INx to OUT) ILK, INx|VINx - VOUT| ≤ 5V; TJ = 25°Cmin -1 · max 1 uA7
Leakage Current (INx to OUT) ILK, INx|VINx - VOUT| ≤ 5V; TJ = -40°C to 85°Cmin -5 · max 5 uA7
Leakage Current (INx to OUT) ILK, INx|VINx - VOUT| ≤ 5V; TJ = -40°C to 125°Cmin -80 · max 80 uA7
Leakage Current (INx to OUT) ILK, INx|VINx - VOUT| ≤ 22V; TJ = 25°Cmin -1 · max 1 uA7
Leakage Current (INx to OUT) ILK, INx|VINx - VOUT| ≤ 22V; TJ = -40°C to 85°Cmin -35 · max 35 uA7
Leakage Current (INx to OUT) ILK, INx|VINx - VOUT| ≤ 22V; TJ = -40°C to 125°Cmin -500 · max 500 uA7
Undervoltage Lockout VUV, INxVINx Rising; TJ = -40°C to 125°Cmin 2.5 · typ 2.65 · max 2.8 V7
Undervoltage Lockout VUV, INxVINx Falling; TJ = -40°C to 125°Cmin 2.4 · typ 2.55 · max 2.7 V7
Switchover Time tSWVOUT < VINx; CP2 or SEL < VREF; TJ = -40°C to 125°Ctyp 100 us7
Fast Switchover Time (TPS2121 only) tFSWTPS2121; VOUT < VINx; CP2 ≥ VREF; TJ = -40°C to 125°Ctyp 5 us7
Input Voltage Comparator (VIN2 referenced to VIN1) VCOMPVIN1 ≥ VIN2; TJ = -40°C to 125°Cmin 0 · typ 280 · max 600 mV7
Input Voltage Comparator (VIN2 referenced to VIN1) VCOMPVIN1 > VIN2, Falling Hysteresis; TJ = -40°C to 125°Cmin 2.5 · typ 3.5 · max 4.5 %7
ON-State Resistance (TPS2121) RONTPS2121; IOUT = -200 mA; VPRI > VREF; VINx ≥ 5.0 V; TJ = 25°Ctyp 56 · max 70 mΩ7
ON-State Resistance (TPS2121) RONTPS2121; IOUT = -200 mA; VPRI > VREF; VINx ≥ 5.0 V; TJ = -40°C to 85°Cmax 85 mΩ7
ON-State Resistance (TPS2121) RONTPS2121; IOUT = -200 mA; VPRI > VREF; VINx ≥ 5.0 V; TJ = -40°C to 105°Cmax 90 mΩ7
ON-State Resistance (TPS2121) RONTPS2121; IOUT = -200 mA; VPRI > VREF; VINx ≥ 5.0 V; TJ = -40°C to 125°Cmax 100 mΩ7
Output Current Limit (TPS2121) ILMTPS2121; RILM = 18.7kΩ; TJ = -40°C to 125°Cmin 4.6 · typ 5.2 · max 5.8 A8
Output Current Limit (TPS2121) ILMTPS2121; RILM = 22.1kΩ; TJ = -40°C to 125°Cmin 4 · typ 4.5 · max 5 A8
Output Current Limit (TPS2121) ILMTPS2121; RILM = 29.8kΩ; TJ = -40°C to 125°Cmin 3 · typ 3.5 · max 4 A8
Output Current Limit (TPS2121) ILMTPS2121; RILM = 44.2kΩ; TJ = -40°C to 125°Cmin 2 · typ 2.5 · max 3 A8
Output Current Limit (TPS2121) ILMTPS2121; RILM = 80kΩ; TJ = -40°C to 125°Cmin 1 · typ 1.5 · max 2 A8
Output Current Limit (TPS2121) ILMTPS2121; RILM < 1kΩ; TJ = -40°C to 125°Cmin 1.5 · typ 2.5 · max 3.5 A8
Current Limit Response Time tLMOutput Steady State; TJ = -40°C to 125°Ctyp 250 us8
Internal Voltage Reference VREF, xVPR1, VCP2, VOV1, VOV2 Rising; TJ = -40°C to 125°Cmin 1.01 · typ 1.06 · max 1.1 V8
Internal Voltage Reference VREF, xVPR1, VCP2, VOV1, VOV2 Falling; TJ = -40°C to 125°Cmin 0.99 · typ 1.04 · max 1.09 V8
Comparator Offset Voltage (TPS2121 only) VOFSTTPS2121; VPR1 > VREF; VCP2 > VREF; TJ = -40°C to 125°Cmin 5 · typ 20 · max 40 mV8
Pin Leakage Current ILK, xVPR1, VCP2, VOV1, VOV2 = 0 V to 5.5 V; TJ = -40°C to 125°Cmin -0.1 · max 0.1 uA8
Pin Leakage ILK, STVST = 0 V to 5.5 V; TJ = -40°C to 125°Cmin -0.1 · max 0.1 uA8
Status Delay tSTL to H; TJ = -40°C to 125°Ctyp 1 us8
Fast Reverse Current Detection Threshold IRCBVOUT > VINx; TJ = -40°C to 125°Cmin 0.2 · typ 1 · max 2 A8
RCB Release Voltage VRCBVOUT > VINx; TJ = -40°C to 125°Cmin 0 · typ 25 · max 50 mV8
Fast Reverse Current Blocking Response Time tRCBTJ = -40°C to 125°Ctyp 10 us8
Thermal Shutdown TSDShutdown; Risingtyp 160 °C8
Thermal Shutdown TSDRecovery; Fallingtyp 150 °C8

Pins, by the datasheet

11
1 OUT
Power Output. · p. 4
2 IN2
Power Input for Source 2. · p. 4
4 OV2
Active Low Enable Supervisor for IN2 Overvoltage Protection; connect to GND if not required. · p. 4
5 OV1
Active Low Enable Supervisor for IN1 Overvoltage Protection; connect to GND if not required. · p. 4
6 PR1
Enables Priority Operation; connect to IN1 to set switchover voltage or GND if not required. · p. 4
7 IN1
Power Input for Source 1. · p. 4
8 OUT
Power Output. · p. 4
9 ST
Status output indicating which channel is selected; connect to GND if not required. · p. 4
10 ILIM
Output Current Limiting for both channels. · p. 4
11 SS
Adjusts Input Setting Delay Time and Output Soft Start Time. · p. 4
12 GND
Device Ground. · p. 4

Open-source boards using it

9See all 9
  • 4 layers68.6 × 53.3 mmPhyduino pico, the printed circuit board in 3D

    Phyduino pico

    UofTPhyEssSW/Student-Workshop-Course-L1

    University of Toronto, Dept. of Physics, Electronic Support Services - Student Workshop Course L1 course files

    130 parts2
  • 4 layers50 × 75 mmOneroiV1, the printed circuit board in 3D

    OneroiV1

    HomeOnDuna/Nyx-Flight-Computers

    Contains the Nyx flight computer family developed for UNSW Rocketry Avionics team.

    166 parts1
  • 4 layers204 × 150 mmGateway, the printed circuit board in 3D

    Gateway

    Kampi/IoT-Gateway

    Open-Source Zigbee, Thread, wM-Bus, LoRa, LoRaWAN gateway for Home Assistant.

    319 parts1
  • 4 layers125 × 75 mmNautilus mainboard, the printed circuit board in 3D

    Nautilus mainboard

    Nautilus-UUV/nautilus-mainboard-PCB

    Additionally the mainboard provides two IMUs (BMI088) that can be accessed over I^2C by the STM32. Those components house accelerometers and gyroscopes for orientation and movement detection and listen to the following…

    155 parts1
  • 4 layers52 × 51 mmDARPA MCTR, the printed circuit board in 3D

    DARPA MCTR

    Alsa2/ThumbMuncher

    Darpa Lift Challenge Code Repo

    100 parts
  • 4 layers81.6 × 102.5 mmLoRa Phone, the printed circuit board in 3D

    LoRa Phone

    maelastiques/PTCR-V5-P4

    204 parts
  • 2 layers87.7 × 51.5 mmKeyboard leds, the printed circuit board in 3D

    Keyboard leds

    modern-hobbyist/keyboard-leds

    A custom PCB for reading MIDI output from a keyboard and lighting the respective LEDs.

    55 parts
  • 4 layers68.6 × 53.3 mmPhyduino pico, the printed circuit board in 3D

    Phyduino pico

    perc-sw/phyduino_pico

    CAD files for the student workshop Phyduino Pico Arduino IDE compatible board.

    129 partsGPL-3.0

Questions

Is there a KiCad symbol and footprint for the TPS2121RUXT?

Yes. The symbol is EasyEDA_Cloud:TPS2121RUXT and the footprint EasyEDA_Cloud:VQFN-HR-12_L2.5-W2.0-P0.50-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS2121RUXT?

VQFN-HR-12(2x2.5), with 12 pins. Its footprint is drawn on this page.

Where is the TPS2121RUXT datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS2121RUXT?

JLCPCB lists it as part C2156025, with 196 in stock; the sellers' links on this page open their listings.

Which open-source boards use the TPS2121RUXT?

9 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.