Skip to the content
123

TLV76033DBZR

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 1.2V@(100mA) 100mA 2mA 3.3V 30V Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/TLV76033DBZR
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-3
Pins
3
In stock
715 at JLCPCB (C2683368)
Used on
11 open-source boards

Overview

The TLV76033DBZR is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-3 package with 3 pins. -40℃~+125℃@(Tj) 1 1.2V@(100mA) 100mA 2mA 3.3V 30V Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1OUT_2IN_3GND, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-23-3, from KiCad's library), ready for a KiCad board. 715 are in stock at JLCPCB (part C2683368). 11 open-source boards in 10 repositories on GitHub use it.

Symbol

2IN1OUT3GND
Pinmap_Generic:Regulator_Linear_1OUT_2IN_3GNDFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:SOT-23-3From KiCad's library

From the datasheet

12
Supply, most
30 V · IN, recommended operating max · p. 4
Supply, absolute maximum
35 V · IN, absolute maximum · p. 4
Junction, hottest
150 °C · Junction temperature, absolute maximum · p. 4
Takes working
2 mA · IN ground pin current, typical, no load, VOUT(NOM) + 1.5 V ≤ VIN ≤ 30 V · p. 5
Gives
100 mA · OUT, rated continuous output max · p. 4
Output
3.3 V · OUT, fixed nominal voltage for TLV76033DBZR · p. 1
Dropout
700 mV · Typical at IOUT = 10 mA, 25°C · p. 5
Dropout
900 mV · Typical at IOUT = 100 mA, 25°C · p. 5
Dropout
1.2 V · Max at IOUT = 100 mA, −40°C ≤ TJ ≤ 125°C · p. 5
Junction to air (DBZ (SOT-23))
275.2 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to case (DBZ (SOT-23))
92.8 K/W · Junction-to-case (top) thermal resistance · p. 4
Junction to board (DBZ (SOT-23))
56.8 K/W · Junction-to-board thermal resistance · p. 4

What it is and has

5
Input voltage
Up to 30 V · p. 1
Output current
Up to 100 mA · p. 1
Operating junction temperature
−40°C to +125°C · p. 1
Protection
Active thermal protection and current limit · p. 1
Package
SOT-23, 3 pins, 2.92 mm × 1.30 mm · p. 1

Around it

1
cap 0.1 µF
between IN and GND; Minimum input capacitance for stability and adequate transient performance; use C0G, X7R, or X5R ceramic. · p. 11

Specifications

24
ParameterConditionsAs printedPage
Input voltage (IN to GND)min -0.3 · max 35 V4
Junction temperaturemin -40 · max 150 °C4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 (1); ±2000 Vmax 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101 (2); ±500 Vmax 500 V4
Maximum input voltage (IN to GND)Over operating free-air temperature rangemax 30 V4
Output current IOUTOver operating free-air temperature rangemax 100 mA4
Input and output capacitor COUTOver operating free-air temperature rangemin 0.1 uF4
Junction temperature TJmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJATLV760, DBZ (SOT-23), 3 pinstyp 275.2 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)TLV760, DBZ (SOT-23), 3 pinstyp 92.8 °C/W4
Junction-to-board thermal resistance RθJBTLV760, DBZ (SOT-23), 3 pinstyp 56.8 °C/W4
Junction-to-top characterization parameter ψJTTLV760, DBZ (SOT-23), 3 pinstyp 2.9 °C/W4
Junction-to-board characterization parameter ψJBTLV760, DBZ (SOT-23), 3 pinstyp 55.6 °C/W4
Output voltage accuracy VOUTVIN = VOUT(NOM) + 1.5 V, 1 mA ≤ IOUT ≤ 100 mA, TA = TJ = 25°C; limits printed as percentagesmin -4 · max 4 V5
Output voltage accuracy VOUTVIN = VOUT(NOM) + 1.5 V, 1 mA ≤ IOUT ≤ 100 mA, −40°C ≤ TJ ≤ 125°C; limits printed as percentagesmin -5 · max 5 V5
Line regulation ΔV(ΔVIN)VOUT(NOM) = 3.3 V; VOUT(NOM) + 1.5 V ≤ VIN ≤ 30 V, IOUT = 1 mA, −40°C ≤ TJ ≤ 125°Ctyp 10 · max 30 mV5
Load regulation ΔV(ΔIOUT)VOUT(NOM) = 3.3 V; VIN = VOUT(NOM) + 1.5 V, 10 mA ≤ IOUT ≤ 100 mA, −40°C ≤ TJ ≤ 125°Ctyp 20 · max 45 mV5
Ground pin current IGNDVOUT(NOM) + 1.5 V ≤ VIN ≤ 30 V, no load, −40°C ≤ TJ ≤ 125°Ctyp 2 · max 5 mA5
Dropout voltage VDOIOUT = 10 mA, TA = TJ = 25°Ctyp 0.7 · max 0.9 V5
Dropout voltage VDOIOUT = 10 mA, −40°C ≤ TJ ≤ 125°Cmax 1 V5
Dropout voltage VDOIOUT = 100 mA, TA = TJ = 25°Ctyp 0.9 · max 1.1 V5
Dropout voltage VDOIOUT = 100 mA, −40°C ≤ TJ ≤ 125°Cmax 1.2 V5
Thermal shutdown temperature TSDtyp 150 °C5

Pins, by the datasheet

3
1 OUT
Output voltage; a ceramic capacitor greater than or equal to 0.1 uF is needed for stability. · p. 3
2 IN
Input voltage supply; TI recommends a capacitor greater than 0.1 uF at the input. · p. 3
3 GND
Common ground. · p. 3

Ordering codes, by the datasheet

1
TLV76033DBZR
SOT-23 (DBZ) · 3.3 V output; 3 pins; 3000-piece LARGE T&R; operating temperature −40 to 125°C; marking 18H. · p. 17

Open-source boards using it

11See all 11
  • 4 layers100 × 65 mmBefore split, the printed circuit board in 3D

    Before split

    rjwalters/kicad-tools

    Standalone Python tools for parsing and manipulating KiCad schematic and PCB files

    47 parts73MIT
  • 4 layers58 × 61.1 mmPower supply, the printed circuit board in 3D

    Power supply

    matthieuvigne/MiAM_robotics

    Generic repo for robotic projects with the former MiAM Eurobot team !

    83 parts5GPL-3.0
  • 2 layers92 × 76 mmILV2-7-5 Clock, the printed circuit board in 3D

    ILV2-7-5 Clock

    biomurph/ILV2-7-5_VFD_Display

    KiCAD circuit for a VFD Clock using the Popular ILV2-7/5 flat tube segmented nixie

    50 parts3GPL-3.0
  • 4 layers100 × 90 mmNexus pear reva, the printed circuit board in 3D

    Nexus pear reva

    aminewe898/nexus-pear-reva

    NEXUS PEAR Rev A hardware design, schematics, PCB, manufacturing review exports and engineering documentation

    117 partsMIT
  • 2 layers45 × 39 mmHeartBone, the printed circuit board in 3D

    HeartBone

    biomurph/HeartBone_Hardware_v2

    A Place For HeartBone Hardware

    42 partsMIT
  • 4 layers83.3 × 88.1 mmBottom PCB, the printed circuit board in 3D

    Bottom PCB

    StanZalewski/Autonomous-remote-monitoring-system-based-on-the-LoRaWAN-protocol

    Solar-powered LoRaWAN weather station — 3 custom PCBs, bare-metal STM32, 4.3 km verified link

    124 parts
  • 4 layers56 × 40 mmVer2 transmiteer, the printed circuit board in 3D

    Ver2 transmiteer

    tonycung/0-10V-to-4-20mA-Converter

    A simple 0–10 V to 4–20 mA analog signal converter designed with KiCad.

    66 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLV76033DBZR?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1OUT_2IN_3GND and the footprint Package_TO_SOT_SMD:SOT-23-3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV76033DBZR?

SOT-23-3, with 3 pins. Its footprint is drawn on this page.

Where is the TLV76033DBZR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLV76033DBZR?

JLCPCB lists it as part C2683368, with 715 in stock; the sellers' links on this page open their listings.

What can replace the TLV76033DBZR?

Parts like it in the library: the XC6206P332MR by HXY MOSFET, the LR7533-T by LR, the XC6206-3.3V by YONGYUTAI and the XC6206P332MR-JSM by JSMSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV76033DBZR?

11 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.