Skip to the content
1234567

TLV75518PDRV

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 1.8V 25uA 380mV@(500mA) 46dB@(100kHz) 5.5V 500mA 71.5uVrms Fixed Over Current Protection、Soft Start、Enable、Thermal Shutdown Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/TLV75518PDRV
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
WSON-6-EP(2x2)
Pins
7
In stock
175 at JLCPCB (C2868686)
Used on
5 open-source boards

Overview

The TLV75518PDRV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a WSON-6-EP(2x2) package with 7 pins. -40℃~+125℃@(Tj) 1 1.8V 25uA 380mV@(500mA) 46dB@(100kHz) 5.5V 500mA 71.5uVrms Fixed Over Current Protection、Soft Start、Enable、Thermal Shutdown Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:TLV75518PDRV, from KiCad's library) and its footprint (Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm, from KiCad's library), ready for a KiCad board. 175 are in stock at JLCPCB (part C2868686). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

1OUT3GND4EN6IN
Regulator_Linear:TLV75518PDRVFrom KiCad's library

Footprint

1234567
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mmFrom KiCad's library

Pinout

7
The pins of the TLV75518PDRV
PinNameType
1OUTPower out
2NCNot connected
3GNDPower in
4ENInput
5NCNot connected
6INPower in
7GNDPassive

Open-source boards using it

5
  • 4 layers65 × 49.8 mm2.5in IDE SSD no lengthmatch, the printed circuit board in 3D

    2.5in IDE SSD no lengthmatch

    dosdude1/2.5-inch-ide-ssd

    A custom-designed IDE SSD for use in any machine that utilizies a 2.5" IDE hard disk.

    91 parts334GPL-3.0
  • 6 layers121 × 83 mmPS2 79004 Rev 0 4, the printed circuit board in 3D

    PS2 79004 Rev 0 4

    tschicki/PS2-Portable

    A custom designed PS2 Portable

    770 parts207MIT
  • 4 layers49 × 68.5 mmIDE SSD ZIF, the printed circuit board in 3D

    IDE SSD ZIF

    dosdude1/zif-ide-ssd

    A custom-designed IDE SSD for use in any machine that utilizies a 1.8" ZIF IDE hard disk.

    86 parts97GPL-3.0
  • 2 layers17 × 33 mmAudioboard, the printed circuit board in 3D

    Audioboard

    Keyaan-07/A1304

    17 parts
  • 4 layers43.4 × 41.5 mmDevboard, the printed circuit board in 3D

    Devboard

    LizOnAir/Camera

    A Camera with customize pcb.

    81 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLV75518PDRV?

Yes. The symbol is Regulator_Linear:TLV75518PDRV and the footprint Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV75518PDRV?

WSON-6-EP(2x2), with 7 pins. Its footprint is drawn on this page.

Where is the TLV75518PDRV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLV75518PDRV?

JLCPCB lists it as part C2868686, with 175 in stock; the sellers' links on this page open their listings.

What can replace the TLV75518PDRV?

Parts like it in the library: the LP5912-1.8DRV by Texas Instruments, the TLV75718PDRV by Texas Instruments, the TLV76718DRV by Texas Instruments and the AP2112K-1.8TRG1 by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV75518PDRV?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.