
Radio Kiosk v2c
Filip-Kin/frc-radio-kiosk
Bench box that powers and configures FRC radios: dual-mode PoE (802.3at via LTC4279, passive 12 V via TPS26600), USB-C PD or DC in, 15.6 V out for the Toughbook, 4x CR123A backup, STM32F072 firmware.
Texas InstrumentsExtended
-40℃~+125℃ 1 1.6V~5.5V 260ns 4.2mV 500uV 5pA 5uA 6V 78dB Push-pull Rail-to-rail input SC-70-5 Comparators ROHS
The TLV7011DCK is a comparator made by Texas Instruments in a SC-70-5 package with 5 pins. -40℃~+125℃ 1 1.6V~5.5V 260ns 4.2mV 500uV 5pA 5uA 6V 78dB Push-pull Rail-to-rail input SC-70-5 Comparators ROHS.
PCBKit's library has its KiCad symbol (Celestial_Power_Linear_VReg:TI TLV7011DCK, from Altium's library) and its footprint (Package_TO_SOT_SMD:SOT-353_SC-70-5, from KiCad's library), ready for a KiCad board. 11,161 are in stock at JLCPCB (part C193688). 2 open-source boards in 2 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage (VS = VCC – VEE) VS | Over operating free-air temperature range | max 6 V | 5 |
| Input pins (IN+, IN–) | Over operating free-air temperature range | max 6 V | 5 |
| Output short-circuit duration | Short-circuit to ground, one comparator per package | max 10 s | 5 |
| Junction temperature, TJ TJ | max 150 °C | 5 | |
| Storage temperature, Tstg Tstg | min -65 · max 150 °C | 5 | |
| Supply voltage (VS = VCC – VEE) VS | Over operating free-air temperature range | min 1.6 · max 5.5 V | 5 |
| Ambient temperature, TA TA | min -40 · max 125 °C | 5 | |
| Junction-to-ambient thermal resistance RθJA | TLV7011, DCK (SC70), 5 PINS | typ 278.8 °C/W | 6 |
| Junction-to-case (top) thermal resistance RθJC(top) | TLV7011, DCK (SC70), 5 PINS | typ 188.6 °C/W | 6 |
| Junction-to-board thermal resistance RθJB | TLV7011, DCK (SC70), 5 PINS | typ 113.2 °C/W | 6 |
| Junction-to-top characterization parameter ΨJT | TLV7011, DCK (SC70), 5 PINS | typ 82.3 °C/W | 6 |
| Junction-to-board characterization parameter ΨJB | TLV7011, DCK (SC70), 5 PINS | typ 112.4 °C/W | 6 |
| Hysteresis VHYS | VS = 1.8 V and 5 V, VCM = VS / 2 | min 1.2 · typ 4.2 · max 14 mV | 7 |
| Input bias current IB | VS = 1.8 V to 5 V, VCM = VS / 2; TA = 25°C | typ 5 pA | 7 |
| Input offset current IOS | VS = 1.8 V to 5 V, VCM = VS / 2; TA = 25°C | typ 1 pA | 7 |
| Output voltage high (for TLV7011 only) VOH | VS = 5 V, IO = 3 mA | min 4.7 · typ 4.8 V | 7 |
| Output voltage low VOL | VS = 5 V, IO = 3 mA | typ 120 · max 220 mV | 7 |
| Common-mode rejection ratio CMRR | VEE < VCM < VCC, VS = 5 V | typ 78 dB | 7 |
| Power supply rejection ratio PSRR | VS = 1.8 V to 5 V, VCM = VS / 2 | typ 78 dB | 7 |
| Short-circuit current ISC | VS = 5 V, sourcing | typ 65 mA | 7 |
| Short-circuit current ISC | VS = 5 V, sinking | typ 44 mA | 7 |
| Supply current ICC | VS = 1.8 V, no load, VID = –0.1 V (Output Low) | typ 5 · max 10 uA | 7 |
| Propagation delay time, high-to-low tPHL | TA = 25°C, VCC = 5 V, VCM = 2.5 V, CL = 15 pF; midpoint of input to midpoint of output, VOD = 100 mV | typ 260 ns | 7 |
| Propagation delay time, low-to-high tPLH | TA = 25°C, VCC = 5 V, VCM = 2.5 V, CL = 15 pF; midpoint of input to midpoint of output, VOD = 100 mV | typ 310 ns | 7 |
| Rise time (for TLV7011 only) tR | 20% to 80%; TA = 25°C, VCC = 5 V, VCM = 2.5 V, CL = 15 pF, input overdrive = 100 mV | typ 5 ns | 7 |
| Fall time tF | 80% to 20%; TA = 25°C, VCC = 5 V, VCM = 2.5 V, CL = 15 pF, input overdrive = 100 mV | typ 5 ns | 7 |
| Power-up time tON | TA = 25°C, VCC = 5 V, VCM = 2.5 V, CL = 15 pF, input overdrive = 100 mV | typ 20 us | 7 |

Filip-Kin/frc-radio-kiosk
Bench box that powers and configures FRC radios: dual-mode PoE (802.3at via LTC4279, passive 12 V via TPS26600), USB-C PD or DC in, 15.6 V out for the Toughbook, 4x CR123A backup, STM32F072 firmware.

tombueng/hilprobe
HILprobe: multi-function UUT probe for hardware-in-the-loop testing - RS-485, CAN FD, logic analyzer, 4-ch scope, two programmable UUT supplies. KiCad 10, 6 layers, RP2350B + ESP32-S3.
Yes. The symbol is Celestial_Power_Linear_VReg:TI TLV7011DCK and the footprint Package_TO_SOT_SMD:SOT-353_SC-70-5, both drawn on this page. PCBKit places them on a board for you when you design with it.
SC-70-5, with 5 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C193688, with 11,161 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the LMV331IDCKR by Texas Instruments, the MCP6561-E/LT by Microchip Technology, the LMV7271MGX by Texas Instruments and the TLV3691IDCK by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.