
TLV70018DCK
Texas InstrumentsExtended
-40℃~+125℃@(Tj) 1 1.8V 200mA 250mV@(200mA) 31uA 48uVrms 5.5V 68dB@(1kHz) Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable SC-70-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS
- Part id
- ti/TLV70018DCK
- Category
- Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
- Package
- SC-70-5
- Pins
- 5
- In stock
- 10,776 at JLCPCB (C133796)
- Used on
- 5 open-source boards
Overview
The TLV70018DCK is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SC-70-5 package with 5 pins. -40℃~+125℃@(Tj) 1 1.8V 200mA 250mV@(200mA) 31uA 48uVrms 5.5V 68dB@(1kHz) Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable SC-70-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.
PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4NC_5OUT, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-353_SC-70-5, from KiCad's library), ready for a KiCad board. 10,776 are in stock at JLCPCB (part C133796). 5 open-source boards in 5 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
12- Supply, least
- 2 V · VIN, recommended operating min · p. 5
- Supply, most
- 5.5 V · VIN, recommended operating max · p. 5
- Supply, absolute maximum
- 6 V · VIN, absolute max · p. 5
- Junction, hottest
- 150 °C · Operating junction temperature, absolute max · p. 5
- Takes working
- 31 µA · Ground pin current, typical at IOUT = 0 mA · p. 6
- Takes asleep
- 400 nA · Shutdown ground current, typical at VEN ≤ 0.4 V, VIN = 2 V · p. 6
- Takes asleep
- 1 µA · Shutdown ground current, typical at VEN ≤ 0.4 V, 2 V ≤ VIN ≤ 4.5 V · p. 6
- Gives
- 200 mA · Recommended continuous output current max · p. 5
- Current limit
- 220 mA · Output current limit min, VOUT = 0.9 × VOUT(nom) · p. 6
- Junction to air (DCK [SC70])
- 307.6 K/W · Junction-to-ambient thermal resistance · p. 5
- Junction to case (DCK [SC70])
- 79.1 K/W · Junction-to-case (top) thermal resistance · p. 5
- Junction to board (DCK [SC70])
- 93.7 K/W · Junction-to-board thermal resistance · p. 5
What it is and has
5- Accuracy
- 2% · p. 1
- Quiescent current
- 31 μA · p. 1
- PSRR
- 68 dB at 1 kHz · p. 1
- Output capacitor stability
- Effective capacitance of 0.1 μF · p. 1
- Protection
- Thermal shutdown and overcurrent protection · p. 1
Around it
2- cap 1 μF
- between IN and GND; Recommended input ceramic capacitor; X5R or X7R. · p. 4
- cap 1 μF
- between OUT and GND; Output ceramic capacitor for stability; X5R or X7R. Effective capacitance under bias and temperature must be at least 0.1 uF; ESR must be less than 200 mΩ. · p. 4
Specifications
34| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Voltage VIN | Over operating junction temperature range | min -0.3 · max 6 V | 5 |
| Voltage VEN | Maximum is VIN + 0.3 V or 6 V, whichever is less | min -0.3 · max 6 V | 5 |
| Voltage VOUT | Over operating junction temperature range | min -0.3 · max 6 V | 5 |
| Operating junction TJ | min -55 · max 150 °C | 5 | |
| Storage Tstg | min -55 · max 150 °C | 5 | |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; ± rating | max 2000 V | 5 |
| Electrostatic discharge V(ESD) | Charged device model (CDM), per JEDEC specification JESD22-C101, all pins; ± rating | max 500 V | 5 |
| VIN VIN | Over operating free-air temperature range | min 2 · max 5.5 V | 5 |
| VOUT VOUT | Family output voltage range | min 1.2 · max 4.8 V | 5 |
| IOUT IOUT | Over operating free-air temperature range | min 0 · max 200 mA | 5 |
| Junction-to-ambient thermal resistance RθJA | DCK [SC70], 5 pins | typ 307.6 °C/W | 5 |
| Junction-to-case (top) thermal resistance RθJC(top) | DCK [SC70], 5 pins | typ 79.1 °C/W | 5 |
| Junction-to-board thermal resistance RθJB | DCK [SC70], 5 pins | typ 93.7 °C/W | 5 |
| Junction-to-top characterization parameter ψJT | DCK [SC70], 5 pins | typ 1.3 °C/W | 5 |
| Junction-to-board characterization parameter ψJB | DCK [SC70], 5 pins | typ 92.8 °C/W | 5 |
| Input voltage range VIN | min 2 · max 5.5 V | 6 | |
| DC output accuracy VOUT | –40°C ≤ TJ ≤ +125°C | min -2 · max 2 % | 6 |
| Line regulation ΔVOUT(ΔVIN) | VOUT(nom) + 0.3 V ≤ VIN ≤ 5.5 V, IOUT = 10 mA | typ 1 · max 5 mV | 6 |
| Load regulation ΔVOUT(ΔIOUT) | 0 mA ≤ IOUT ≤ 200 mA | typ 1 · max 15 mV | 6 |
| Output current limit ICL | VOUT = 0.9 × VOUT(nom) | min 220 · max 860 mA | 6 |
| Ground pin current IGND | IOUT = 0 mA | typ 31 · max 55 uA | 6 |
| Ground pin current IGND | IOUT = 200 mA, VIN = VOUT + 0.5 V | typ 270 uA | 6 |
| Ground pin current (shutdown) ISHDN | VEN ≤ 0.4 V, VIN = 2 V | typ 400 nA | 6 |
| Ground pin current (shutdown) ISHDN | VEN ≤ 0.4 V, 2 V ≤ VIN ≤ 4.5 V | typ 1 · max 2 uA | 6 |
| Power-supply rejection ratio PSRR | VIN = 2.3 V, VOUT = 1.8 V, IOUT = 10 mA, f = 1 kHz | typ 68 dB | 6 |
| Output noise voltage Vn | BW = 100 Hz to 100 kHz, VIN = 2.3 V, VOUT = 1.8 V, IOUT = 10 mA | typ 48 uVRMS | 6 |
| Start-up time tSTR | COUT = 1 uF, IOUT = 200 mA; time from EN assertion to 0.98 × VOUT(nom) | typ 100 us | 6 |
| Enable pin high (enabled) VEN(high) | Maximum: VIN | min 0.9 V | 6 |
| Enable pin low (disabled) VEN(low) | min 0 · max 0.4 V | 6 | |
| Enable pin current IEN | VIN = VEN = 5.5 V | typ 0.04 · max 0.5 uA | 6 |
| Undervoltage lockout UVLO | VIN rising | typ 1.9 V | 6 |
| Thermal shutdown temperature Tsd | Shutdown, temperature increasing | typ 160 °C | 6 |
| Thermal shutdown temperature Tsd | Reset, temperature decreasing | typ 140 °C | 6 |
| Operating junction temperature TJ | min -40 · max 125 °C | 6 |
Pins, by the datasheet
5- 1 IN
- Input supply; a 1-uF ceramic capacitor to ground is recommended for stability and transient performance. · p. 4
- 2 GND
- Ground pin. · p. 4
- 3 EN
- Enable input; above 0.9 V enables the regulator and below 0.4 V puts it into shutdown. · p. 4
- 4 NC
- No connection; can be tied to ground to improve thermal dissipation. · p. 4
- 5 OUT
- Regulated output; a 1-uF ceramic capacitor to ground is needed for stability. · p. 4
Open-source boards using it
5- 4 layers124.6 × 68.7 mm

- 2 layers103.9 × 43.5 mm

- 2 layers118.2 × 73 mm

- 4 layers42 × 44.4 mm

STM32 FlightController
JLjoestar23/STM32_FlightController
PCB, software, firmware, and other files related to a custom made STM32-based flight controller.
56 parts1 - 4 layers

Parts like it
8BL9198-18BAPURN
SC-70-5-40℃~+85℃@(Ta) 1 1.8V 100uVrms 210mV@(300mA) 300mA 6V 78dB@(217Hz) 90uA Fixed Over Current Protection、Over Temperature Protection Positive SC-70-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSBLVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAP2125KS-1.8TRG1
SC-70-5-40℃~+85℃@(Ta) 1 1.8V 300mA 50uVrms 60uA 65mV@(100mA) 6V 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SC-70-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsVRH1802LSX
SOT-353-51 1.8V 25uA 300mA 6V 75dB@(1kHz) 90mV SOT-353-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnaSemVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsRS3236-1.8YC5
SOT-353(SC-70-5)-40℃~+85℃@(Ta) 1 1.8V 30uA 500mA 68uVrms 7.5V 72dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-353(SC-70-5) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJiangsu RUNIC TechVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsRT9020-18GU5
SC-70-5-40℃~+85℃@(Ta) 1 1.8V 25uA 40uVrms 5.5V 500mA 55dB@(10kHz) Fixed Over Current Protection、Over Temperature Protection Positive SC-70-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRichtek TechVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSGM2036-1.8YC5G/TR
SC-70-5SC-70-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSG MicroVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsWL2810B18-5/TR
SOT-353-40℃~+85℃@(Ta) 1 1.8V 300mA 42uA 5.5V 55uVrms 600mV@(300mA) 70dB@(217Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control Positive SOT-353 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSWILLSEMIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsDS8561-18C5
SC70-5-40℃~+125℃@(Tj) 1 1.8V 120uVrms 2uA 300mA 5.5V 60mV@(100mA) 75dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection Positive SC70-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDSTECHVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Questions
Is there a KiCad symbol and footprint for the TLV70018DCK?
Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4NC_5OUT and the footprint Package_TO_SOT_SMD:SOT-353_SC-70-5, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TLV70018DCK?
SC-70-5, with 5 pins. Its footprint is drawn on this page.
Where is the TLV70018DCK datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TLV70018DCK?
JLCPCB lists it as part C133796, with 10,776 in stock; the sellers' links on this page open their listings.
What can replace the TLV70018DCK?
Parts like it in the library: the BL9198-18BAPURN by BL, the AP2125KS-1.8TRG1 by Diodes Incorporated, the VRH1802LSX by AnaSem and the RS3236-1.8YC5 by Jiangsu RUNIC Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the TLV70018DCK?
5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.