Skip to the content
123456

TLV3011AIDBVR

Texas InstrumentsExtended

-40℃~+125℃ 1.8V~5.5V 10pA 12mV 13.5us 5uA 74dB Open-drain SOT-23-6 Comparators ROHS

Part id
ti/TLV3011AIDBVR
Category
Comparators
Package
SOT-23-6
Pins
6
In stock
7,150 at JLCPCB (C2870632)
Used on
4 open-source boards

Overview

The TLV3011AIDBVR is a comparator made by Texas Instruments in a SOT-23-6 package with 6 pins. -40℃~+125℃ 1.8V~5.5V 10pA 12mV 13.5us 5uA 74dB Open-drain SOT-23-6 Comparators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TLV3011AQDBVRQ1, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 7,150 are in stock at JLCPCB (part C2870632). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

5REF2GND6VCC1OUT4IN-3IN+
EasyEDA_Cloud:TLV3011AQDBVRQ1From EasyEDA

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

From the datasheet

11
Supply, least
1.8 V · V+, relative to V–, recommended operating, min · p. 5
Supply, most
5.5 V · V+, relative to V–, recommended operating, max · p. 5
Supply, absolute maximum
7 V · V+, supply voltage, absolute maximum · p. 4
Works from
-40 °C · ambient operating temperature, min · p. 5
Works up to
125 °C · ambient operating temperature, max · p. 5
Junction, hottest
150 °C · junction temperature, absolute maximum · p. 4
Takes working
2.8 µA · quiescent supply current, VS = 5 V, output high, 25°C, typical · p. 6
Takes at most
5 µA · quiescent supply current, VS = 5 V, output high, 25°C, max · p. 6
Junction to air (DBV)
191.6 K/W · junction-to-ambient thermal resistance, typical · p. 5
Junction to board (DBV)
38.7 K/W · junction-to-board thermal resistance, typical · p. 5
Junction to case (DBV)
123.9 K/W · junction-to-case top thermal resistance, typical · p. 5

Open-source boards using it

4
  • 2 layers119.9 × 57 mm1v2boost, the printed circuit board in 3D

    1v2boost

    benkrasnow/1v2-boost-converter

    Schematics and PCB layout for a boost converter 0.9V minimum input, 30A maximum input current

    77 parts7MIT
  • 2 layers100 × 85 mmDekatron, the printed circuit board in 3D

    Dekatron

    kuvychko/universal-nixie-display

    Six IN-14 Nixie tubes, an A101 dekatron and an ESP32 touchscreen in one desktop display: a clock, timer and toy, and a numeric display for a computer over USB.

    165 parts1
  • 4 layers110 × 140 mmTrackball base, the printed circuit board in 3D

    Trackball base

    ntindle/trackball

    Ultimate Mouse: fully custom trackball with a free-spinning active ball (capacitive touch ring, nRF52810, inductive charging) and a dual-PMW3360 base (nRF52840, USB-C, HID + custom driver). No mechanical wheel.

    159 parts1
  • 4 layers110 × 80 mmSpin rig controller, the printed circuit board in 3D

    Spin rig controller

    Tinkerbug-Robotics/TinkerRocket

    Model rocket flight computer, ground station, iOS app, and simulation

    170 parts1GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLV3011AIDBVR?

Yes. The symbol is EasyEDA_Cloud:TLV3011AQDBVRQ1 and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV3011AIDBVR?

SOT-23-6, with 6 pins. Its footprint is drawn on this page.

Where is the TLV3011AIDBVR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLV3011AIDBVR?

JLCPCB lists it as part C2870632, with 7,150 in stock; the sellers' links on this page open their listings.

What can replace the TLV3011AIDBVR?

Parts like it in the library: the MX3501T23 by Wuxi Maxinmicro, the TPS3700DDCR by Texas Instruments, the TLV3501AIDBV by Texas Instruments and the TLV1805DBV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV3011AIDBVR?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.