Skip to the content
PCBKitNew board
TLV272IP on a board, in 3D

TLV272IP

Texas Instruments

-40℃~+125℃ -8V~-1.35V、1.35V~8V 1pA 2 2.4V/us 2.7V~16V 2uV/℃ 39nV/√Hz@10kHz 3MHz 500uV 550uA 60pA 70dB 7mA Rail-to-rail output PDIP-8 Operational Amplifier ROHS

Extended
DatasheetJLCPCBLCSCti/TLV272IP
Category
Operational Amplifier
Package
PDIP-8
Pins
2

Overview

The TLV272IP is an operational Amplifier made by Texas Instruments in a PDIP-8 package with 8 pins. -40℃~+125℃ -8V~-1.35V、1.35V~8V 1pA 2 2.4V/us 2.7V~16V 2uV/℃ 39nV/√Hz@10kHz 3MHz 500uV 550uA 60pA 70dB 7mA Rail-to-rail output PDIP-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TLC27L2ACDR, from EasyEDA) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1346123). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

OUT11IN1-2IN1+3GND4VDD8
EasyEDA_Cloud:TLC27L2ACDRFrom EasyEDA

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Parameters

16
Common Mode Rejection Ratio(CMRR)
70dB
Dual Supply
1.35V~8V, -8V~-1.35V
Gain Bandwidth Product
3MHz
Ib - Input Bias Current
1pA
Input Offset Current(Ios)
60pA
Input Offset Voltage Drift(Vos TC)
2uV/℃
Input Voltage Noise Density
39nV/√Hz@10kHz
Maximum Power Supply Range (Vdd-Vss)
16V
Number of Channels
2
Operating Temperature
-40℃~+125℃
Output Current
7mA
Quiescent Current
550uA
Rail to Rail
Rail-to-rail output
Single supply
2.7V~16V
Slew Rate
2.4V/us
Vos - Input Offset Voltage
500uV

Order codes

1

Pinout

8
The pins of the TLV272IP
PinNameType
1OUT1Output
2IN1-Unspecified
3IN1+Unspecified
4GNDUnspecified
5IN2+Unspecified
6IN2-Unspecified
7OUT2Output
8VDDUnspecified

Open-source boards using it

All 2
  • 2 layers281.6 × 255.2 mmSynthia, the printed circuit board in 3D

    Synthia

    Engineering-House/Project-Synthia

    The programs used are as follows: - STMCube32MX - Visual Studio Code - STM32CubeIDE for Visual Studio Code (Extension Pack)

    236 parts
  • 2 layers52 × 26.5 mmT3pa loadcell mod v0, the printed circuit board in 3D

    T3pa loadcell mod v0

    foriequal0/t3pa-loadcell-mod

    Thrustmaster T3PA pedal load cell mod without a dead zone

    10 parts5

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/TLV272IP" title="TLV272IP in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/TLV272IP.jpg" alt="TLV272IP" width="1200" height="900">
A picture that opens the part, for a README
[![TLV272IP](https://pcbkit.io/embed/parts/ti/TLV272IP.jpg?size=s)](https://pcbkit.io/parts/ti/TLV272IP)

Questions

Is there a KiCad symbol and footprint for the TLV272IP?

Yes. The symbol is EasyEDA_Cloud:TLC27L2ACDR and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV272IP?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the TLV272IP datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLV272IP?

JLCPCB lists it as part C1346123, with 0 in stock; the sellers' links on this page open their listings.

What can replace the TLV272IP?

Parts like it in the library: the LM358N by HGSEMI, the LM358N/NOPB by Texas Instruments, the LM258P by Texas Instruments and the LM741CN/NOPB by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV272IP?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8