Skip to the content
PAD

TLC59283RGER

Texas InstrumentsExtended

-40℃~+85℃ 10V 16 3% 35MHz 3V~5.5V 45mA Built-in Over-Temperature Protection (OTP)、Short-Circuit Protection VQFN-24-EP(4x4) LED Drivers ROHS

Part id
ti/TLC59283RGER
Category
LED Drivers
Package
VQFN-24-EP(4x4)
Pins
25
In stock
3,067 at JLCPCB (C485815)
Used on
6 open-source boards

Overview

The TLC59283RGER is a LED Driver made by Texas Instruments in a VQFN-24-EP(4x4) package with 25 pins. -40℃~+85℃ 10V 16 3% 35MHz 3V~5.5V 45mA Built-in Over-Temperature Protection (OTP)、Short-Circuit Protection VQFN-24-EP(4x4) LED Drivers ROHS.

PCBKit's library has its KiCad symbol (pimoroni-ics:TLC59283, from Eagle libraries) and its footprint (pimoroni-ics:QFN-24, from Eagle libraries), ready for a KiCad board. 3,067 are in stock at JLCPCB (part C485815). 6 open-source boards in 5 repositories on GitHub use it.

Symbol

21VCC22GNDPADGND20IREF18BLANK1LATCH24SCLK23SIN3OUT14OUT25OUT36OUT47OUT58OUT69OUT710OUT811OUT912OUT1013OUT1114OUT1215OUT1319SOUT16OUT1417OUT152OUT0
pimoroni-ics:TLC59283From Eagle libraries

Footprint

PAD
pimoroni-ics:QFN-24From Eagle libraries

From the datasheet

16
Supply, least
3 V · VCC, recommended operating min · p. 6
Supply, most
5.5 V · VCC, recommended operating max · p. 6
Supply, absolute maximum
6 V · VCC, absolute maximum · p. 5
Works from
-40 °C · TA, operating free-air min · p. 6
Works up to
85 °C · TA, operating free-air max · p. 6
Junction, hottest
150 °C · Operating junction absolute maximum · p. 5
Takes working
8 mA · VCC typical, all outputs on, RIREF = 1.5kΩ · p. 7
Takes at most
11 mA · VCC max, all outputs on, RIREF = 1.5kΩ · p. 7
Gives
35 mA · Per channel max, 3 V ≤ VCC ≤ 3.6 V · p. 6
Gives
45 mA · Per channel max, 3.6 V < VCC ≤ 5.5 V · p. 6
A pin gives at most
50 mA · OUT0 to OUT15, per output dc absolute maximum · p. 5
Junction to air (RGE)
42.9 K/W · Junction-to-ambient thermal resistance · p. 6
Junction to board (RGE)
21.7 K/W · Junction-to-board thermal resistance · p. 6
Junction to case (RGE)
55.3 K/W · Junction-to-case top thermal resistance · p. 6
Data rate, most
35 Mbit/s · SCLK data shift clock frequency max · p. 6
Edge
3 ns · SOUT rise time typical · p. 8

What it is and has

7
LED channels
16, constant-current sink with individual on/off control · p. 1
Pre-charge FET
Ghosting reduction · p. 1
Noise reduction
Grouped switching delay · p. 1
Package
RGE (QFN, 24) · p. 1
Channels
16 constant-current sink outputs with on and off control · p. 1
Pre-charge FET
Included · p. 1
LED power-supply voltage
Up to 10 V · p. 1

Specifications

59
ParameterConditionsAs printedPage
Supply VCCOver operating free-air temperature rangemin -0.3 · max 6 V5
Input range, SIN, SCLK, LAT, BLANK, IREF VINMaximum: VCC + 0.3 Vmin -0.3 V5
Output range, SOUT VOUTMaximum: VCC + 0.3 Vmin -0.3 V5
Output range, OUT0 to OUT15 VOUTmin -0.3 · max 11 V5
Output (dc), OUT0 to OUT15 IOUTmax 50 mA5
Operating junction TJ(MAX)max 150 °C5
Storage range Tstgmin -55 · max 150 °C5
DMD storage temperature Tstgapplicable before the DMD is installed in the final productmin -55 · max 150 °C5
Electrostatic discharge V (ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-0011max 3000 V5
Electrostatic discharge V (ESD)Charged device model (CDM), per ANSI/ESDA/JEDEC JS-0022max 2000 V5
Supply voltage VCCTA = –40°C to +85°Cmin 3 · max 5.5 V6
Voltage applied to output VOOUT0 to OUT15max 10 V6
Output current, High IOHSOUTmax -2 mA6
Output current, Low IOLSOUTmax 2 mA6
Constant output sink current IOLCOUT0 to OUT15, 3 V ≤ VCC ≤ 3.6 Vmin 2 · max 35 mA6
Constant output sink current IOLCOUT0 to OUT15, 3.6 V < VCC ≤ 5.5 Vmin 2 · max 45 mA6
Temperature range, Operating free-air TAmin -40 · max 85 °C6
Temperature range, Operating junction TJmin -40 · max 125 °C6
Data shift clock frequency fCLK (SCLK)SCLK; VCC = 3 V to 5.5 Vmax 35 MHz6
Pulse duration tWH0SCLKmin 10 ns6
Pulse duration tWL0SCLKmin 10 ns6
Pulse duration tWH1LATmin 20 ns6
Pulse duration tWH2BLANKmin 100 ns6
Pulse duration tWL2BLANKmin 50 ns6
Setup time tSU0SIN↑↓ – SCLK↑min 4 ns6
Setup time tSU1LAT↓ – SCLK↑min 10 ns6
Hold time tH0SIN↑↓ – SCLK↑min 4 ns6
Hold time tH1LAT↓ – SCLK↑min 10 ns6
Junction-to-ambient thermal resistance θJARGE, 24 PINStyp 42.9 °C/W6
Junction-to-case (top) thermal resistance θJCtopRGE, 24 PINStyp 55.3 °C/W6
Junction-to-board thermal resistance θJBRGE, 24 PINStyp 21.7 °C/W6
Junction-to-top characterization parameter ψJTRGE, 24 PINStyp 1.9 °C/W6
Junction-to-board characterization parameter ψJBRGE, 24 PINStyp 21.8 °C/W6
Junction-to-case (bottom) thermal resistance θJCbotRGE, 24 PINStyp 8.8 °C/W6
Output voltage, Low VOLIOL = 2mA at SOUTmax 0.4 V7
Reference voltage output VIREFRIREF = 1.5kΩ, TA = +25°Ctyp 1.208 V7
Input current IINVIN = VCC or GND at SIN and SCLKmin -1 · max 1 uA7
Supply current (VCC) ICC0SIN, SCLK, LAT = GND, BLANK = VOUTn = VCC, RIREF = opentyp 1 · max 2 mA7
Supply current (VCC) ICC1SIN, SCLK, LAT = GND, BLANK = VOUTn = VCC, RIREF = 3kΩ (IOUT = 17.6mA target)typ 3 · max 4 mA7
Supply current (VCC) ICC2All OUTn = ON, SIN, SCLK, LAT, BLANK = GND, VOUTn = 0.8V, RIREF = 3kΩtyp 7 · max 9 mA7
Supply current (VCC) ICC3All OUTn = ON, SIN, SCLK, LAT, BLANK = GND, VOUTn = 0.8V, RIREF = 1.5kΩ (IOUT = 35.3mA target)typ 8 · max 11 mA7
Constant output current IOLCAll OUTn = ON, VOUTn = VOUTfix = 0.8V, RIREF = 1.5kΩ, TA = +25°C (see Figure 6-8)min 32.9 · typ 35.3 · max 37.7 mA7
Output leakage current IOLKG0All OUTn = OFF, VOUTn = VOUTfix = 10 V, BLANK = VCC, RIREF = 1.5 kΩ; TJ = +25°Cmax 0.1 uA7
Output leakage current IOLKG0All OUTn = OFF, VOUTn = VOUTfix = 10 V, BLANK = VCC, RIREF = 1.5 kΩ; TJ = +85°Cmax 0.2 uA7
Output leakage current IOLKG0All OUTn = OFF, VOUTn = VOUTfix = 10 V, BLANK = VCC, RIREF = 1.5 kΩ; TJ = +125°Ctyp 0.07 · max 0.5 uA7
Constant-current error, Device-to-device ΔIOLC1All OUTn = ON, VOUTn = VOUTfix = 0.8V, RIREF = 1.5kΩ, TA = +25°C; values stated as ±typ 2 · max 4 %7
Line regulation ΔIOLC2All OUTn = ON, VOUTn = VOUTfix = 0.8V, RIREF = 1.5kΩ, VCC = 3V to 5.5V; values stated as ±typ 0.05 · max 1 %/V7
Load regulation ΔIOLC3All OUTn = ON, VOUTn = 0.8V to 3V, VOUTfix = 0.8V, RIREF = 1.5kΩ; values stated as ±typ 0.5 · max 1 %/V7
Resistor, Pull-up RPUPBLANKmin 250 · typ 500 · max 750 kΩ7
Resistor, Pull-down RPDWNLATmin 250 · typ 500 · max 750 kΩ7
Pre-charge FET on-resistance RPCHGVCC = 5.0V, VOUTn = 0V, OUT0 to OUT15, BLANK = VCC, TA = +25°Ctyp 3 · max 6 kΩ7
Rise time tR0SOUT (see Figure 6-7)typ 3 · max 10 ns8
Rise time tR1OUTn (see Figure 6-6)typ 44 ns8
Fall time tF0SOUT (see Figure 6-7)typ 3 · max 10 ns8
Fall time tF1OUTn (see Figure 6-6)typ 44 ns8
Propagation delay time tD0SCLK↑ to SOUT↑↓typ 11 · max 20 ns8
Propagation delay time tD1LAT↑ or BLANK↑↓ to OUT0 on or off, TA = +25°Ctyp 60 · max 100 ns8
Propagation delay time tD2Grouped OUTn on or off to next group on or off, TA = +25°Ctyp 2 ns8
Output on-time error tON_ERROutput on or off latch data = all '1', 50ns BLANK GND level pulse, VCC = 3.3V, TA = +25°Cmin -45 · max 45 ns8

Ordering codes, by the datasheet

8
TLC59283DBQ
SSOP (DBQ) | 24 · 50 units, TUBE; operating temperature -40 to 85 °C · p. 28
TLC59283DBQ.A
SSOP (DBQ) | 24 · 50 units, TUBE; operating temperature -40 to 85 °C · p. 28
TLC59283DBQR
SSOP (DBQ) | 24 · 2500 units, LARGE T&R; operating temperature -40 to 85 °C · p. 28
TLC59283DBQR.A
SSOP (DBQ) | 24 · 2500 units, LARGE T&R; operating temperature -40 to 85 °C · p. 28
TLC59283RGER
VQFN (RGE) | 24 · 3000 units, LARGE T&R; operating temperature -40 to 85 °C · p. 28
TLC59283RGER.A
VQFN (RGE) | 24 · 3000 units, LARGE T&R; operating temperature -40 to 85 °C · p. 28
TLC59283RGET
VQFN (RGE) | 24 · 250 units, SMALL T&R; operating temperature -40 to 85 °C · p. 28
TLC59283RGET.A
VQFN (RGE) | 24 · 250 units, SMALL T&R; operating temperature -40 to 85 °C · p. 28

Open-source boards using it

6
  • 2 layers53.4 × 84.4 mmPOV card v1, the printed circuit board in 3D

    POV card v1

    ExcessiveOverkill/POV-card-v1

    Persistence-of-vision shake light-up badges designed by Excessive Overkill

    64 parts5
  • 2 layers53.4 × 84.4 mmPCB business cards, the printed circuit board in 3D

    PCB business cards

    ExcessiveOverkill/PCB-business-cards

    Everything needed to make your own persistence of vision business cards

    70 parts3
  • 4 layers152.3 × 72 mmIr glasses EVT E7, the printed circuit board in 3D

    Ir glasses EVT E7

    noahzhy/cc_glasses

    tools/ 为此次整改的重建和检查脚本;日常直接编辑 KiCad 工程。重建脚本会覆盖设计,不能在人工修改后直接重跑。Python 工具不引入继承类;需要 KiCad 10 的 pcbnew Python,以及 Python 3 的 sexpdata、numpy、scipy、shapely、pymupdf。

    171 parts1MIT
  • 4 layers118 × 76 mmSmart led badge, the printed circuit board in 3D

    Smart led badge

    zgeez/Pixel-Badge

    Wearable 32x32 LED badge with Zephyr firmware, BLE control, passive NFC, and a Flutter Android app, built around a custom nRF52840 PCB.

    1,236 partsMIT
  • 2 layers53.4 × 84.4 mmOpensauce2024, the printed circuit board in 3D

    Opensauce2024

    ExcessiveOverkill/PCB-business-cards

    Everything needed to make your own persistence of vision business cards

    65 parts3
  • 2 layers110 × 82 mm7-seg display-2-digits, the printed circuit board in 3D

    7-seg display-2-digits

    sburgic/poc-and-obsolete

    Proof of concepts and old (obsolete) projects

    47 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLC59283RGER?

Yes. The symbol is pimoroni-ics:TLC59283 and the footprint pimoroni-ics:QFN-24, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLC59283RGER?

VQFN-24-EP(4x4), with 25 pins. Its footprint is drawn on this page.

Where is the TLC59283RGER datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLC59283RGER?

JLCPCB lists it as part C485815, with 3,067 in stock; the sellers' links on this page open their listings.

What can replace the TLC59283RGER?

Parts like it in the library: the TLC59283RGET by Texas Instruments, the TLC59284DBQ by Texas Instruments, the TLC5929DBQ by Texas Instruments and the TLC5929RGER by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLC59283RGER?

6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.