Skip to the content
12345678910111213141516171819202122232425262728

TLC59116IPW

Texas InstrumentsExtended

-40℃~+85℃ 120mA 16 17V 3V~5.5V 8% 97kHz Built-in DC-DC Over-Temperature Protection (OTP) PWM、I2C TSSOP-28 LED Drivers ROHS

DatasheetJLCPCBLCSC
Part id
ti/TLC59116IPW
Category
LED Drivers
Package
TSSOP-28
Pins
28
In stock
2,543 at JLCPCB (C131194)
Used on
3 open-source boards

Overview

The TLC59116IPW is a LED Driver made by Texas Instruments in a TSSOP-28 package with 28 pins. -40℃~+85℃ 120mA 16 17V 3V~5.5V 8% 97kHz Built-in DC-DC Over-Temperature Protection (OTP) PWM、I2C TSSOP-28 LED Drivers ROHS.

PCBKit's library has its KiCad symbol (dk_PMIC-LED-Drivers:TLC59116IPWR, from Digikey) and its footprint (Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm, from KiCad's library), ready for a KiCad board. 2,543 are in stock at JLCPCB (part C131194). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

REXT1A02A13A24A35OUT06OUT17OUT28OUT39GND10OUT411OUT512OUT613OUT714OUT815OUT916OUT1017OUT1118GND19OUT1220OUT1321OUT1422OUT1523GND24RESET25SCL26SDA27VCC28
dk_PMIC-LED-Drivers:TLC59116IPWRFrom Digikey

Footprint

12345678910111213141516171819202122232425262728
Package_SO:TSSOP-28_4.4x9.7mm_P0.65mmFrom KiCad's library

Pinout

28
The pins of the TLC59116IPW
PinNameType
1REXTPassive
2A0Input
3A1Input
4A2Input
5A3Input
6OUT0Power out
7OUT1Power out
8OUT2Power out
9OUT3Power out
10GNDPower in
11OUT4Power out
12OUT5Power out
13OUT6Power out
14OUT7Power out
15OUT8Power out
16OUT9Power out
17OUT10Power out
18OUT11Power out
19GNDPower in
20OUT12Power out
21OUT13Power out
22OUT14Power out
23OUT15Power out
24GNDPower in
25RESETInput
26SCLInput
27SDAInput/output
28VCCPower in

Open-source boards using it

3
  • 4 layers150 × 50 mmTiepieLCR, the printed circuit board in 3D

    TiepieLCR

    martijnschouten/tiepielcr-hardware

    Contains the design files of the TiePieLCR multi-frequency spectrometer front-end

    241 partsGPL-3.0
  • 2 layers102 × 42 mmFrontpanel template, the printed circuit board in 3D

    Frontpanel template

    sillevl/spha-din-frontpanel-template-hardware

    Reusable KiCad design used as the basis for SPHA module front panels.

    27 parts
  • 2 layers102 × 42 mmFrontpanel template, the printed circuit board in 3D

    Frontpanel template

    sillevl/spha-rel6-frontpanel-hardware

    Front-panel PCB for the SPHA six-channel relay module.

    17 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLC59116IPW?

Yes. The symbol is dk_PMIC-LED-Drivers:TLC59116IPWR and the footprint Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLC59116IPW?

TSSOP-28, with 28 pins. Its footprint is drawn on this page.

Where is the TLC59116IPW datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLC59116IPW?

JLCPCB lists it as part C131194, with 2,543 in stock; the sellers' links on this page open their listings.

What can replace the TLC59116IPW?

Parts like it in the library: the TLC59116ITPWRQ1 by Texas Instruments, the TLC59116FIPW by Texas Instruments, the TLC59116ITPWTQ1 by Texas Instruments and the TLC5940PWPR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLC59116IPW?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.