
TiepieLCR
martijnschouten/tiepielcr-hardware
Contains the design files of the TiePieLCR multi-frequency spectrometer front-end

Reusable KiCad design used as the basis for SPHA module front panels.
Frontpanel template is an open-source printed circuit board by sillevl, from the sillevl/spha-din-frontpanel-template-hardware repository on GitHub. It is a 2-layer board of 102 × 42 mm with 27 parts on 33 nets, routed with 316 tracks and 42 vias.
It is built around the TLC59116IPW. Its parts include 19 diodes, 5 resistors, 2 connectors and 1 IC.
Reusable KiCad design used as the basis for SPHA module front panels.
Lifecycle: retain as a template or historical design. Its schematic is shared with an input front panel, but its PCB, project settings, and final backup are unique; outright removal is not currently valid. See
../../docs/hardware-project-lifecycle-review.md.
frontpanel-template.kicad_pro — KiCad projectfrontpanel-template.kicad_sch — top-level schematicfrontpanel-template.kicad_pcb — PCB layoutOpen the .kicad_pro file in KiCad. The design includes files originating from an older KiCad workflow; review schematic links, footprints, design rules, zones, and manufacturing outputs after any conversion or upgrade.
KiCad source files and project-specific libraries are the source of truth. Generated BOM, Gerber, assembly, and fabrication-house outputs are excluded from the repository; regenerate and verify them before manufacturing.
Temporary KiCad state, locks, autosaves, and backup directories are excluded by .gitignore. Board revision, tested KiCad version, manufacturing revision, and hardware/firmware compatibility still need to be recorded when provenance is confirmed.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1K | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5 |
| 2 | Conn_02x10_Odd_Even | Connector_PinSocket_2.00mm:PinSocket_2x10_P2.00mm_Vertical_SMD | J3, J4 |
| 1 | 1 | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | 10 | LED_SMD:LED_0603_1608Metric | D13 |
| 1 | 11 | LED_SMD:LED_0603_1608Metric | D14 |
| 1 | 12 | LED_SMD:LED_0603_1608Metric | D15 |
| 1 | 13 | LED_SMD:LED_0603_1608Metric | D16 |
| 1 | 14 | LED_SMD:LED_0603_1608Metric | D17 |
| 1 | 15 | LED_SMD:LED_0603_1608Metric | D18 |
| 1 | 16 | LED_SMD:LED_0603_1608Metric | D19 |
| 1 | 2 | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | 3 | LED_SMD:LED_0603_1608Metric | D6 |
| 1 | 4 | LED_SMD:LED_0603_1608Metric | D7 |
| 1 | 5 | LED_SMD:LED_0603_1608Metric | D8 |
| 1 | 6 | LED_SMD:LED_0603_1608Metric | D9 |
| 1 | 7 | LED_SMD:LED_0603_1608Metric | D10 |
| 1 | 8 | LED_SMD:LED_0603_1608Metric | D11 |
| 1 | 9 | LED_SMD:LED_0603_1608Metric | D12 |
| 1 | COMMUNICATION | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | POWER | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | STATUS | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | TLC59116 | Package_DFN_QFN:VQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U1 |

martijnschouten/tiepielcr-hardware
Contains the design files of the TiePieLCR multi-frequency spectrometer front-end

sillevl/spha-rel6-frontpanel-hardware
Front-panel PCB for the SPHA six-channel relay module.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.
It measures 102 × 42 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the TLC59116IPW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sillevl/spha-din-frontpanel-template-hardware repository on GitHub, at the commit this page was made from: the board is frontpanel-template.kicad_pcb and its schematic frontpanel-template.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sillevl before reusing the design.