4 layers70.8 × 108 mm
TL074CPW
Texas InstrumentsExtended
-15V~-5V、5V~15V 0℃~+70℃ 1.4mA 100pA 13V/us 18nV/√Hz@1kHz 18uV/℃ 3MHz 3mV 65pA 80dB Four channels Short-Circuit Protection、Built-in compensation、Latch-up suppression TSSOP-14 FET Input Amplifiers ROHS
- Part id
- ti/TL074CPW
- Category
- FET Input Amplifiers
- Package
- TSSOP-14
- Pins
- 14
- In stock
- 22,561 at JLCPCB (C96507)
- Used on
- 3 open-source boards
Overview
The TL074CPW is a FET Input Amplifier made by Texas Instruments in a TSSOP-14 package with 14 pins. -15V~-5V、5V~15V 0℃~+70℃ 1.4mA 100pA 13V/us 18nV/√Hz@1kHz 18uV/℃ 3MHz 3mV 65pA 80dB Four channels Short-Circuit Protection、Built-in compensation、Latch-up suppression TSSOP-14 FET Input Amplifiers ROHS.
PCBKit's library has its KiCad symbol (Amplifier_Operational:TL074, from KiCad's library) and its footprint (Package_SO:TSSOP-14_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 22,561 are in stock at JLCPCB (part C96507). 3 open-source boards in 3 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
7- Supply, least
- 4.5 V · V+ – V–, recommended operating min · p. 11
- Supply, most
- 40 V · V+ – V–, recommended operating max · p. 11
- Supply, absolute maximum
- 42 V · V+ – V–, absolute max · p. 11
- Works from
- 0 °C · TA, TL07xC rated operating min · p. 11
- Works up to
- 70 °C · TA, TL07xC rated operating max · p. 11
- Junction, hottest
- 150 °C · TJ, absolute max · p. 11
- Junction to case (PW)
- 14.5 K/W · junction to case top · p. 13
What it is and has
2- Protection
- 输出短路保护 · p. 1
- Package
- TSSOP (14), 5.00mm × 4.40mm · p. 1
Specifications
41| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| 电源电压，VS = (V+) – (V–) VS | 所有其他器件；PW | min 0 · max 42 V | 11 |
| 信号输入引脚 电流 | 所有其他器件 | min -10 · max 10 mA | 11 |
| 工作环境温度 TA | min -55 · max 150 °C | 11 | |
| 结温 TJ | max 150 °C | 11 | |
| 10 秒内距离外壳 1.8mm（1/16 英寸）的引线温度 | max 300 °C | 11 | |
| 贮存温度 Tstg | min -65 · max 150 °C | 11 | |
| 静电放电 V(ESD) | 人体放电模型 (HBM)，符合 ANSI/ESDA/JEDEC JS-001 标准；±2000 V | min -2000 · max 2000 V | 11 |
| 静电放电 V(ESD) | 充电器件模型 (CDM)，符合 JEDEC 规范 JESD22-C101；±1000 V | min -1000 · max 1000 V | 11 |
| 电源电压，(V+) – (V–) VS | 所有其他器件；PW | min 4.5 · max 40 V | 11 |
| 额定温度 TA | TL07xC | min 0 · max 70 °C | 11 |
| 结至外壳（顶部）热阻 RθJC(top) | TL074xx，PW (TSSOP)，14 引脚 | typ 14.5 °C/W | 13 |
| 输入失调电压 VOS | TL07xC；VO = 0V，RS = 50Ω；TA = 25°C | typ 3 · max 10 mV | 16 |
| 输入失调电压 VOS | TL07xC；VO = 0V，RS = 50Ω；TA = 完整范围 | max 13 mV | 16 |
| 输入失调电压漂移 dVOS/dT | VO = 0V，RS = 50Ω；TA = 完整范围；典型值 ±18 | typ 18 uV/℃ | 16 |
| 输入失调电流 IOS | TL07xC；VO = 0V；TA = 25°C | typ 5 · max 100 pA | 16 |
| 输入失调电流 IOS | TL07xC；VO = 0V；TA = 完整范围 | max 10 nA | 16 |
| 输入偏置电流 IB | TL07xC；VO = 0V；TA = 25°C | typ 65 · max 200 pA | 16 |
| 输入偏置电流 IB | TL07xC；VO = 0V；TA = 完整范围 | max 7 nA | 16 |
| 共模电压范围 VCM | 最小保证范围 ±11 V；典型范围 –12 至 15 V | min 11 V | 16 |
| 最大峰值输出电压摆幅 VOM | RL = 10kΩ；TA = 25°C；最小值 ±12，典型值 ±13.5 | min 12 · typ 13.5 V | 16 |
| 最大峰值输出电压摆幅 VOM | RL ≥ 10kΩ；TA = 完整范围；最小值 ±12 | min 12 V | 16 |
| 最大峰值输出电压摆幅 VOM | RL ≥ 2kΩ；TA = 完整范围；最小值 ±10 | min 10 V | 16 |
| 开环电压增益 AOL | TL07xC；VO = 0V；TA = 25°C | min 25 · typ 200 V/mV | 16 |
| 开环电压增益 AOL | TL07xC；VO = 0V；TA = 完整范围 | min 15 V/mV | 16 |
| 增益带宽积 GBW | 所有其他器件；PW | typ 5.25 MHz | 16 |
| 共模输入电阻 RID | TA = 25°C | typ 1 TΩ | 16 |
| 共模抑制比 CMRR | TL07xC；VIC = VICR(min)，VO = 0V，RS = 50Ω | min 70 · typ 100 dB | 16 |
| 输入失调电压与电源间的关系 PSRR | TL07xC；VS = ±9V 至 ± 18V，VO = 0V，RS = 50Ω | min 70 · typ 100 dB | 16 |
| 每个放大器的静态电流 IQ | VO = 0 V；空载；TA = 25°C | typ 1.4 · max 2.5 mA | 17 |
| 通道隔离 | f = 0Hz | typ 1 uV/V | 17 |
| 压摆率 SR | TL07xC；VI = 10V，CL = 100pF，RL = 2kΩ | min 8 · typ 20 V/us | 18 |
| 趋稳时间 tS | VI = 20V，CL = 100pF，RL = 2kΩ；20% | typ 0.1 us | 18 |
| 输入电压噪声密度 eN | 所有其他器件；f = 1kHz | typ 37 nV/√Hz | 18 |
| 输入电压噪声密度 eN | 所有其他器件；f = 10kHz | typ 21 nV/√Hz | 18 |
| 输入电压噪声 EN | 所有其他器件；f = 0.1Hz 至 10Hz | typ 1.4 uVRMS | 18 |
| 输入电流噪声 iN | RS = 20Ω，f = 1kHz | typ 10 fA/√Hz | 18 |
| 相位裕度 | TL07xC；G = +1，RL = 10kΩ，CL = 20pF | typ 56 ° | 18 |
| 过载恢复时间 | VIN × 增益 > VS | typ 300 ns | 18 |
| 总谐波失真 + 噪声 THD+N | 所有其他器件；VS = 40V，VO = 6VRMS，G = +1，f = 1kHz | typ 0.00012 % | 18 |
| EMI 抑制比 EMIRR | TL07xC；f = 1GHz | typ 53 dB | 18 |
| 开环输出阻抗 ZO | TL07xC；f=1MHz，IO = 0A | typ 125 Ω | 18 |
Open-source boards using it
3- 4 layers30 × 53.5 mm
Speak to Me
wntrblm/Speak_to_Me
A beautiful stereo headphone amplifier and a delightfully lo-fi speaker
54 parts20 - 2 layers
Andes 12hp
niektb/sluisbrinkie-eurorack-published
Published Modules of the Sluisbrinkie project
141 parts34
Parts like it
8
TL074HIPW
TSSOP-14-20V~-2.25V、2.25V~20V -40℃~+125℃ 0.5pA 105dB 1mV 1pA 20V/us 26mA 2uV/℃ 37nV/√Hz@1kHz 4.5V~40V 5.25MHz 940uA Four channels Short-Circuit Protection、EMI filtering/RF suppression TSSOP-14 FET Input Amplifiers ROHSTexas InstrumentsFET Input AmplifiersLF347IMT/TR
TSSOP-14-18V~18V -40℃~+85℃ 1.4mA 16V/us 20nA 3mV 4MHz 4nA 60mA 75dB Four channels Short-Circuit Protection、Built-in compensation TSSOP-14 FET Input Amplifiers ROHSHGSEMIFET Input AmplifiersTL084CPW
TSSOP-14-15V~15V 0℃~+70℃ 1.4mA 13V/us 18nV/√Hz@1kHz 18uV/℃ 30pA 3MHz 3mV 5pA 86dB Four channels Short-Circuit Protection、Latch-up suppression TSSOP-14 FET Input Amplifiers ROHSTexas InstrumentsFET Input AmplifiersTL084CPT
TSSOP-140℃~+70℃ 1.4mA 100pA 10MHz 10uV/℃ 12V/us 15nV/√Hz@1kHz 3mV 50pA 60mA 86dB Four channels Short-Circuit Protection、Built-in compensation、Latch-up suppression TSSOP-14 FET Input Amplifiers ROHSSTMicroelectronicsFET Input AmplifiersTL084HIPW
TSSOP-14-20V~-2.25V、2.25V~20V -40℃~+125℃ 0.5pA 105dB 120pA 1mV 20V/us 26mA 2uV/℃ 37nV/√Hz@1kHz 4.5V~40V 5.25MHz 937.5uA Four channels Short-Circuit Protection、EMI filtering/RF suppression TSSOP-14 FET Input Amplifiers ROHSTexas InstrumentsFET Input AmplifiersOPA4140AIPW
TSSOP-140.35uV/℃ 1.8mA 10pA 11MHz 120dB 120uV 20V/us TSSOP-14 FET Input Amplifiers ROHSTexas InstrumentsFET Input AmplifiersAD8513ARUZ-REEL
TSSOP-14-15V~-5V、5V~15V -40℃~+125℃ 0.9uV/℃ 20V/us 25pA 2mA 54mA 6pA 80uV 86dB 8MHz 8nV/√Hz@1kHz Built-in compensation、Overvoltage protection、High capacitive load driving Four channels TSSOP-14 FET Input Amplifiers ROHSAnalog DevicesFET Input AmplifiersTL084IPT
TSSOP-14-40℃~+125℃ 1.4mA 15nV/√Hz@1kHz 16V/us 20pA 3mV 40mA 4MHz 5pA 5uV/℃ 6V~36V 86dB Four channels Short-Circuit Protection、Built-in compensation、Latch-up suppression TSSOP-14 FET Input Amplifiers ROHSSTMicroelectronicsFET Input Amplifiers
Questions
Is there a KiCad symbol and footprint for the TL074CPW?
Yes. The symbol is Amplifier_Operational:TL074 and the footprint Package_SO:TSSOP-14_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TL074CPW?
TSSOP-14, with 14 pins. Its footprint is drawn on this page.
Where is the TL074CPW datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TL074CPW?
JLCPCB lists it as part C96507, with 22,561 in stock; the sellers' links on this page open their listings.
What can replace the TL074CPW?
Parts like it in the library: the TL074HIPW by Texas Instruments, the LF347IMT/TR by HGSEMI, the TL084CPW by Texas Instruments and the TL084CPT by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the TL074CPW?
3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.