Skip to the content

THVD1406DRL

Texas InstrumentsExtended

-40℃~+125℃ 1 1 1.7mA 256 3V~5.5V 500Kbps Half-Duplex Transceiver ±16kV SOT-8(5x3) RS-485 / RS-422 ICs ROHS

Part id
ti/THVD1406DRL
Category
RS 485, RS 422 ICs
Package
SOT-8(5x3)
Pins
8
In stock
2,361 at JLCPCB (C5215919)
Used on
10 open-source boards

Overview

The THVD1406DRL is a RS 485, RS 422 IC made by Texas Instruments in a SOT-8(5x3) package with 8 pins. -40℃~+125℃ 1 1 1.7mA 256 3V~5.5V 500Kbps Half-Duplex Transceiver ±16kV SOT-8(5x3) RS-485 / RS-422 ICs ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MS2548, from EasyEDA) and its footprint (EasyEDA_Cloud:SOT-5X3-8_L2.1-W1.2-P0.50-LS1.9-BL, from EasyEDA), ready for a KiCad board. 2,361 are in stock at JLCPCB (part C5215919). 10 open-source boards in 7 repositories on GitHub use it.

Symbol

1R2RE#3SHDN#4D5GND6A7B8VCC
EasyEDA_Cloud:MS2548From EasyEDA

Footprint

EasyEDA_Cloud:SOT-5X3-8_L2.1-W1.2-P0.50-LS1.9-BLFrom EasyEDA

Pinout

8
The pins of the THVD1406DRL
PinNameType
1RUnspecified
2RE#Unspecified
3SHDN#Unspecified
4DUnspecified
5GNDUnspecified
6AUnspecified
7BUnspecified
8VCCUnspecified

Open-source boards using it

10See all 10
  • 2 layers64.6 × 36.9 mmNavien latest, the printed circuit board in 3D

    Navien latest

    htumanyan/navien

    Navien water heater wire protocol for communication with NaviLink and other attached devices

    30 parts65
  • 4 layers80 × 80 mmPICO RS485, the printed circuit board in 3D

    PICO RS485

    mortens-lab/PICO_RS485

    Raspberry Pi Pico with RS485 interface and sensors

    61 parts6
  • 4 layers95 × 75 mmPico IoT thingy, the printed circuit board in 3D

    Pico IoT thingy

    mhered/KiCAD_udemy_course

    My notes on the course "PCB design with KiCAD - updated for KiCAD 9" by Dr Peter Dalmaris in Udemy

    61 parts2
  • 4 layers80 × 80 mmPICO iot, the printed circuit board in 3D

    PICO iot

    Ayan-nova/Design-of-a-Raspberry-PICO-Iot-Device-on-4-Layer-PCB-Design-With-Sensor-And-More

    Design a Raspberry Pi Pico W-based Industrial IoT Gateway and Edge Controller using Kicad software.

    60 parts1
  • 2 layers36 × 72 mmHCP Bridge, the printed circuit board in 3D

    HCP Bridge

    JonasE99/HCP-Bridge

    🚧 WIP – not yet manufactured or tested. KiCad PCB (one per door) connecting Hörmann series 4 garage door operators (ProMatic/SupraMatic, BUS/RJ12) to Loxone via ESP32-S3 and Wi-Fi.

    53 parts1
  • 4 layers65.1 × 32.6 mmMain Control, the printed circuit board in 3D

    Main Control

    julien-martinez2/Reginleif

    Custom robot based on the Reginleif from 86: Eighty-Six from Asato Asato

    62 partsMIT
  • 2 layers64.6 × 36.9 mmNavien, the printed circuit board in 3D

    Navien

    htumanyan/navien

    Navien water heater wire protocol for communication with NaviLink and other attached devices

    29 parts65

Questions

Is there a KiCad symbol and footprint for the THVD1406DRL?

Yes. The symbol is EasyEDA_Cloud:MS2548 and the footprint EasyEDA_Cloud:SOT-5X3-8_L2.1-W1.2-P0.50-LS1.9-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the THVD1406DRL?

SOT-8(5x3), with 8 pins. Its footprint is drawn on this page.

Where is the THVD1406DRL datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the THVD1406DRL?

JLCPCB lists it as part C5215919, with 2,361 in stock; the sellers' links on this page open their listings.

Which open-source boards use the THVD1406DRL?

10 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.