
SN74LVC3G17DCTR
Texas InstrumentsExtended
-40℃~+85℃ 1.65V~5.5V 10uA 3 3 32mA 32mA 5.4ns@3.3V,50pF 74LVC Push-pull Schmitt trigger Unidirectional MSOP-8-2.8mm Buffers, Drivers, Receivers, Transceivers ROHS
- Part id
- ti/SN74LVC3G17DCTR
- Category
- Buffers, Drivers, Receivers, Transceivers
- Package
- MSOP-8-2.8mm
- Pins
- 8
- In stock
- 8,874 at JLCPCB (C18213)
- Used on
- 5 open-source boards
Overview
The SN74LVC3G17DCTR is a buffers, Drivers, Receivers, Transceiver made by Texas Instruments in a MSOP-8-2.8mm package with 8 pins. -40℃~+85℃ 1.65V~5.5V 10uA 3 3 32mA 32mA 5.4ns@3.3V,50pF 74LVC Push-pull Schmitt trigger Unidirectional MSOP-8-2.8mm Buffers, Drivers, Receivers, Transceivers ROHS.
PCBKit's library has its KiCad symbol (74xGxx:74LVC3G17, from KiCad's library) and its footprint (Package_SO:SSOP-8_2.95x2.8mm_P0.65mm, from KiCad's library), ready for a KiCad board. 8,874 are in stock at JLCPCB (part C18213). 5 open-source boards in 4 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
8- Supply, least
- 1.65 V · VCC, recommended operating min · p. 4
- Supply, most
- 5.5 V · VCC, recommended operating max · p. 4
- Supply, absolute maximum
- 6.5 V · VCC, absolute max · p. 4
- Works from
- -40 °C · Operating free-air temperature min · p. 4
- Works up to
- 125 °C · Operating free-air temperature max · p. 4
- Takes working
- 10 µA · VCC supply current max, VI = 5.5 V or GND, IO = 0 · p. 5
- A pin gives at most
- 50 mA · Continuous output current absolute max magnitude, source or sink · p. 4
- Junction to air (DCT (SSOP))
- 220 K/W · Junction-to-ambient thermal resistance · p. 5
What it is and has
6- Function
- Triple Schmitt-trigger buffer · p. 1
- Buffers
- 3 independent buffers; Y = A · p. 9
- Input voltage tolerance
- 5.5 V · p. 1
- Output drive
- ±24 mA at 3.3 V · p. 1
- Protection
- Ioff supports live insertion, partial-power-down mode and back drive protection · p. 9
- Package
- SSOP (8), 2.95 mm × 2.80 mm · p. 1
Around it
1- cap 0.1-μF
- between VCC and GND; Supply bypass capacitor; install as close to the power terminal as possible. · p. 11
Specifications
99| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage VCC | Over operating free-air temperature range | min -0.5 · max 6.5 V | 4 |
| Input voltage VI | Over operating free-air temperature range; footnote (2) | min -0.5 · max 6.5 V | 4 |
| Voltage applied to any output in the high-impedance or power-off state VO | Footnote (2) | min -0.5 · max 6.5 V | 4 |
| Output voltage VO | Footnotes (2), (3); maximum is VCC + 0.5 V | min -0.5 V | 4 |
| Input clamp current IIK | VI < 0 | max -50 mA | 4 |
| Output clamp current IOK | VO < 0 | max -50 mA | 4 |
| Continuous output current IO | Maximum magnitude; printed rating ±50 mA | max 50 mA | 4 |
| Continuous current through VCC or GND | Maximum magnitude; printed rating ±100 mA | max 100 mA | 4 |
| Storage temperature Tstg | min -65 · max 150 °C | 4 | |
| Electrostatic discharge VESD | Human Body Model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins | max 2000 V | 4 |
| Electrostatic discharge VESD | Charged-Device Model (CDM), per JEDEC specification JESD22-C101, all pins | max 1000 V | 4 |
| Supply voltage VCC | Operating | min 1.65 · max 5.5 V | 4 |
| Input voltage VI | min 0 · max 5.5 V | 4 | |
| Output voltage VO | Maximum is VCC | min 0 V | 4 |
| High-level output current IOH | VCC = 1.65 V | max -4 mA | 4 |
| High-level output current IOH | VCC = 2.3 V | max -8 mA | 4 |
| High-level output current IOH | VCC = 3 V | max -16 mA | 4 |
| High-level output current IOH | VCC = 3 V | max -24 mA | 4 |
| High-level output current IOH | VCC = 4.5 V | max -32 mA | 4 |
| Low-level output current IOL | VCC = 1.65 V | max 4 mA | 4 |
| Low-level output current IOL | VCC = 2.3 V | max 8 mA | 4 |
| Low-level output current IOL | VCC = 3 V | max 16 mA | 4 |
| Low-level output current IOL | VCC = 3 V | max 24 mA | 4 |
| Low-level output current IOL | VCC = 4.5 V | max 32 mA | 4 |
| Operating free-air temperature TA | min -40 · max 125 °C | 4 | |
| Junction-to-ambient thermal resistance RθJA | DCT (SSOP); calculated in accordance with JESD 51-7 | typ 220 °C/W | 5 |
| Positive-going input threshold voltage VT+ | VCC = 1.65 V; –40°C to 85°C | min 0.79 · max 1.16 V | 5 |
| Positive-going input threshold voltage VT+ | VCC = 1.65 V; –40°C to 125°C | min 0.79 · max 1.16 V | 5 |
| Positive-going input threshold voltage VT+ | VCC = 2.3 V; –40°C to 85°C | min 1.11 · max 1.56 V | 5 |
| Positive-going input threshold voltage VT+ | VCC = 2.3 V; –40°C to 125°C | min 1.11 · max 1.56 V | 5 |
| Positive-going input threshold voltage VT+ | VCC = 3 V; –40°C to 85°C | min 1.5 · max 1.87 V | 5 |
| Positive-going input threshold voltage VT+ | VCC = 3 V; –40°C to 125°C | min 1.5 · max 1.87 V | 5 |
| Positive-going input threshold voltage VT+ | VCC = 4.5 V; –40°C to 85°C | min 2.16 · max 2.74 V | 5 |
| Positive-going input threshold voltage VT+ | VCC = 4.5 V; –40°C to 125°C | min 2.16 · max 2.74 V | 5 |
| Positive-going input threshold voltage VT+ | VCC = 5.5 V; –40°C to 85°C | min 2.61 · max 3.33 V | 5 |
| Positive-going input threshold voltage VT+ | VCC = 5.5 V; –40°C to 125°C | min 2.61 · max 3.33 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 1.65 V; –40°C to 85°C | min 0.39 · max 0.62 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 1.65 V; –40°C to 125°C | min 0.39 · max 0.62 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 2.3 V; –40°C to 85°C | min 0.58 · max 0.87 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 2.3 V; –40°C to 125°C | min 0.58 · max 0.87 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 3 V; –40°C to 85°C | min 0.84 · max 1.14 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 3 V; –40°C to 125°C | min 0.84 · max 1.14 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 4.5 V; –40°C to 85°C | min 1.41 · max 1.79 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 4.5 V; –40°C to 125°C | min 1.41 · max 1.79 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 5.5 V; –40°C to 85°C | min 1.87 · max 2.29 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 5.5 V; –40°C to 125°C | min 1.87 · max 2.29 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 1.65 V; –40°C to 85°C | min 0.37 · max 0.62 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 1.65 V; –40°C to 125°C | min 0.37 · max 0.62 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 2.3 V; –40°C to 85°C | min 0.48 · max 0.77 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 2.3 V; –40°C to 125°C | min 0.48 · max 0.77 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 3 V; –40°C to 85°C | min 0.56 · max 0.87 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 3 V; –40°C to 125°C | min 0.56 · max 0.87 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 4.5 V; –40°C to 85°C | min 0.71 · max 1.04 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 4.5 V; –40°C to 125°C | min 0.71 · max 1.04 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 5.5 V; –40°C to 85°C | min 0.71 · max 1.11 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 5.5 V; –40°C to 125°C | min 0.71 · max 1.11 V | 5 |
| VOH VOH | IOH = –4 mA; VCC = 1.65 V; –40°C to 85°C | min 1.2 V | 5 |
| VOH VOH | IOH = –4 mA; VCC = 1.65 V; –40°C to 125°C | min 1.2 V | 5 |
| VOH VOH | IOH = –8 mA; VCC = 2.3 V; –40°C to 85°C | min 1.9 V | 5 |
| VOH VOH | IOH = –8 mA; VCC = 2.3 V; –40°C to 125°C | min 1.9 V | 5 |
| VOH VOH | IOH = –16 mA; VCC = 3 V; –40°C to 85°C | min 2.4 V | 5 |
| VOH VOH | IOH = –16 mA; VCC = 3 V; –40°C to 125°C | min 2.4 V | 5 |
| VOH VOH | IOH = –24 mA; VCC = 3 V; –40°C to 85°C | min 2.3 V | 5 |
| VOH VOH | IOH = –24 mA; VCC = 3 V; –40°C to 125°C | min 2.3 V | 5 |
| VOH VOH | IOH = –32 mA; VCC = 4.5 V; –40°C to 85°C | min 3.8 V | 5 |
| VOH VOH | IOH = –32 mA; VCC = 4.5 V; –40°C to 125°C | min 3.8 V | 5 |
| VOL VOL | IOL = 100 uA; VCC = 1.65 V to 5.5 V; –40°C to 85°C | max 0.1 V | 5 |
| VOL VOL | IOL = 100 uA; VCC = 1.65 V to 5.5 V; –40°C to 125°C | max 0.1 V | 5 |
| VOL VOL | IOL = 4 mA; VCC = 1.65 V; –40°C to 85°C | max 0.45 V | 5 |
| VOL VOL | IOL = 4 mA; VCC = 1.65 V; –40°C to 125°C | max 0.45 V | 5 |
| VOL VOL | IOL = 8 mA; VCC = 2.3 V; –40°C to 85°C | max 0.3 V | 5 |
| VOL VOL | IOL = 8 mA; VCC = 2.3 V; –40°C to 125°C | max 0.3 V | 5 |
| VOL VOL | IOL = 16 mA; VCC = 3 V; –40°C to 85°C | max 0.4 V | 5 |
| VOL VOL | IOL = 16 mA; VCC = 3 V; –40°C to 125°C | max 0.4 V | 5 |
| VOL VOL | IOL = 24 mA; VCC = 3 V; –40°C to 85°C | max 0.55 V | 5 |
| VOL VOL | IOL = 24 mA; VCC = 3 V; –40°C to 125°C | max 0.75 V | 5 |
| VOL VOL | IOL = 32 mA; VCC = 4.5 V; –40°C to 85°C | max 0.55 V | 5 |
| VOL VOL | IOL = 32 mA; VCC = 4.5 V; –40°C to 125°C | max 0.75 V | 5 |
| II II | VI = 5.5 V or GND; VCC = 0 to 5.5 V; –40°C to 85°C; maximum magnitude, printed ±1 | max 1 uA | 5 |
| II II | VI = 5.5 V or GND; VCC = 0 to 5.5 V; –40°C to 125°C; maximum magnitude, printed ±5 | max 5 uA | 5 |
| Ioff Ioff | VI or VO = 5.5 V; VCC = 0 V; –40°C to 85°C; maximum magnitude, printed ±5 | max 5 uA | 5 |
| Ioff Ioff | VI or VO = 5.5 V; VCC = 0 V; –40°C to 125°C; maximum magnitude, printed ±10 | max 10 uA | 5 |
| ICC ICC | VI = 5.5 V or GND, IO = 0; VCC = 1.65 V to 5.5 V; –40°C to 85°C | max 10 uA | 5 |
| ICC ICC | VI = 5.5 V or GND, IO = 0; VCC = 1.65 V to 5.5 V; –40°C to 125°C | max 10 uA | 5 |
| ΔICC ΔICC | One input at VCC – 0.6 V, other inputs at VCC or GND; VCC = 3 V to 5.5 V; –40°C to 85°C | max 500 uA | 5 |
| ΔICC ΔICC | One input at VCC – 0.6 V, other inputs at VCC or GND; VCC = 3 V to 5.5 V; –40°C to 125°C | max 500 uA | 5 |
| CI CI | VI = VCC or GND; VCC = 3.3 V; TA = 25°C | typ 4 pF | 5 |
| tpd tpd | A to Y; See Figure 3; VCC = 1.8 V ± 0.15 V; first printed row; CL = 30 pF or 50 pF | min 4.3 · max 9.2 ns | 6 |
| tpd tpd | A to Y; See Figure 3; VCC = 2.5 V ± 0.2 V; first printed row; CL = 30 pF or 50 pF | min 2 · max 6.2 ns | 6 |
| tpd tpd | A to Y; See Figure 3; VCC = 3.3 V ± 0.3 V; first printed row; CL = 30 pF or 50 pF | min 1.2 · max 5.4 ns | 6 |
| tpd tpd | A to Y; See Figure 3; VCC = 5 V ± 0.5 V; first printed row; CL = 30 pF or 50 pF | min 1 · max 4.1 ns | 6 |
| tpd tpd | A to Y; See Figure 3; VCC = 1.8 V ± 0.15 V; second printed row; CL = 30 pF or 50 pF | min 4.3 · max 10.2 ns | 6 |
| tpd tpd | A to Y; See Figure 3; VCC = 2.5 V ± 0.2 V; second printed row; CL = 30 pF or 50 pF | min 2 · max 7.2 ns | 6 |
| tpd tpd | A to Y; See Figure 3; VCC = 3.3 V ± 0.3 V; second printed row; CL = 30 pF or 50 pF | min 1.2 · max 6.4 ns | 6 |
| tpd tpd | A to Y; See Figure 3; VCC = 5 V ± 0.5 V; second printed row; CL = 30 pF or 50 pF | min 1 · max 5.1 ns | 6 |
| Power dissipation capacitance Cpd | f = 10 MHz; TA = 25°C; VCC = 1.8 V | typ 18 pF | 6 |
| Power dissipation capacitance Cpd | f = 10 MHz; TA = 25°C; VCC = 2.5 V | typ 19 pF | 6 |
| Power dissipation capacitance Cpd | f = 10 MHz; TA = 25°C; VCC = 3.3 V | typ 19 pF | 6 |
| Power dissipation capacitance Cpd | f = 10 MHz; TA = 25°C; VCC = 5 V | typ 22 pF | 6 |
Pins, by the datasheet
8- 1 1A
- Input 1 · p. 3
- 2 3Y
- Output 3 · p. 3
- 3 2A
- Input 2 · p. 3
- 4 GND
- Ground · p. 3
- 5 2Y
- Output 2 · p. 3
- 6 3A
- Input 3 · p. 3
- 7 1Y
- Output 1 · p. 3
- 8 VCC
- Power Pin · p. 3
Ordering codes, by the datasheet
12- SN74LVC3G17DCTR
- SSOP (DCT) | 8 · 3000 | LARGE T&R; NIPDAU | SN lead finish; -40 to 125°C · p. 14
- SN74LVC3G17DCTR.B
- SSOP (DCT) | 8 · 3000 | LARGE T&R; SN lead finish; -40 to 125°C · p. 14
- SN74LVC3G17DCTRE4
- SSOP (DCT) | 8 · 3000; carrier listed as null; NIPDAU lead finish; -40 to 125°C · p. 14
- SN74LVC3G17DCTRE4.B
- SSOP (DCT) | 8 · 3000; carrier listed as null; NIPDAU lead finish; -40 to 125°C · p. 14
- SN74LVC3G17DCTRG4
- SSOP (DCT) | 8 · 3000 | LARGE T&R; NIPDAU lead finish; -40 to 125°C · p. 14
- SN74LVC3G17DCTRG4.B
- SSOP (DCT) | 8 · 3000 | LARGE T&R; NIPDAU lead finish; -40 to 125°C · p. 14
- SN74LVC3G17DCUR
- VSSOP (DCU) | 8 · 3000 | LARGE T&R; NIPDAU | SN lead finish; -40 to 125°C · p. 14
- SN74LVC3G17DCUR.B
- VSSOP (DCU) | 8 · 3000 | LARGE T&R; SN lead finish; -40 to 125°C · p. 14
- SN74LVC3G17DCURG4
- VSSOP (DCU) | 8 · 3000 | LARGE T&R; NIPDAU lead finish; -40 to 125°C · p. 14
- SN74LVC3G17DCURG4.B
- VSSOP (DCU) | 8 · 3000 | LARGE T&R; NIPDAU lead finish; -40 to 125°C · p. 14
- SN74LVC3G17YZPR
- DSBGA (YZP) | 8 · 3000 | LARGE T&R; SNAGCU ball material; -40 to 85°C · p. 14
- SN74LVC3G17YZPR.B
- DSBGA (YZP) | 8 · 3000 | LARGE T&R; SNAGCU ball material; -40 to 85°C · p. 14
Open-source boards using it
5- 4 layers116 × 112 mm

- 4 layers90 × 70 mm

Robot hub rev3
dustin-lehmann/TWIPR
See https://github.com/dustin-lehmann/TWIPR/wiki for descriptions on how to use the hardware and software
278 parts1 - 2 layers44.1 × 18.4 mm

- 4 layers95 × 75 mm

Robot hub rev4
dustin-lehmann/TWIPR
See https://github.com/dustin-lehmann/TWIPR/wiki for descriptions on how to use the hardware and software
268 parts1 - 2 layers89 × 107.5 mm

Parts like it
8SN74AVC2T45DCTR
SM-8-40℃~+85℃ 1 1.2V~3.6V 12mA 12mA 2 2.4ns@3.3V,50pF 20uA 74AVC Bidirectional Tri-State SM-8 Translators, Level Shifters ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC3G07DCTR
MSOP-8-2.8mm-40℃~+125℃ 1 1.65V~5.5V 10uA 3 3.7ns@3.3V 32mA 74LVC Open-drain Unidirectional MSOP-8-2.8mm Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC2G125DCT
SSOP-8-40℃~+125℃ 1 1.65V~5.5V 10uA 2 32mA 32mA 4.3ns@3.3V,50pF 74LVC Tri-State Unidirectional SSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC2G241DCT
SM-8-40℃~+125℃ 1 1.65V~5.5V 10uA 2 32mA 32mA 4.3ns@3.3V,50pF 74LVC Tri-State Unidirectional SM-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC2G240DCT
SSOP-8-40℃~+125℃ 1 1.65V~5.5V 10uA 2 32mA 32mA 4.6ns@3.3V,50pF 74LVC Tri-State Unidirectional SSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC3G34DCTR
MSOP-8-2.8mm-40℃~+125℃ 1 1.4ns@3.3V,50pF 1.65V~5.5V 10uA 24mA 3 32mA 74LVC Unidirectional MSOP-8-2.8mm Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74AUC2G240DCT
SSOP-8-40℃~+85℃ 0.8V~2.7V 1 1.8ns@1.8V,15pF 10uA 2 74AUC 9mA 9mA Tri-State Unidirectional SSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74AUC2G241DCT
SM-8-40℃~+85℃ 0.8V~2.7V 1 1.9ns@1.8V,15pF 10uA 2 74AUC 9mA 9mA Tri-State Unidirectional SM-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
Questions
Is there a KiCad symbol and footprint for the SN74LVC3G17DCTR?
Yes. The symbol is 74xGxx:74LVC3G17 and the footprint Package_SO:SSOP-8_2.95x2.8mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the SN74LVC3G17DCTR?
MSOP-8-2.8mm, with 8 pins. Its footprint is drawn on this page.
Where is the SN74LVC3G17DCTR datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the SN74LVC3G17DCTR?
JLCPCB lists it as part C18213, with 8,874 in stock; the sellers' links on this page open their listings.
What can replace the SN74LVC3G17DCTR?
Parts like it in the library: the SN74AVC2T45DCTR by Texas Instruments, the SN74LVC3G07DCTR by Texas Instruments, the SN74LVC2G125DCT by Texas Instruments and the SN74LVC2G241DCT by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the SN74LVC3G17DCTR?
5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.