SN74LVC2G125DCT
Texas InstrumentsExtended
-40℃~+125℃ 1 1.65V~5.5V 10uA 2 32mA 32mA 4.3ns@3.3V,50pF 74LVC Tri-State Unidirectional SSOP-8 Buffers, Drivers, Receivers, Transceivers ROHS
- Part id
- ti/SN74LVC2G125DCT
- Category
- Buffers, Drivers, Receivers, Transceivers
- Package
- SSOP-8
- Pins
- 8
- In stock
- 4,889 at JLCPCB (C206035)
Overview
The SN74LVC2G125DCT is a buffers, Drivers, Receivers, Transceiver made by Texas Instruments in a SSOP-8 package with 8 pins. -40℃~+125℃ 1 1.65V~5.5V 10uA 2 32mA 32mA 4.3ns@3.3V,50pF 74LVC Tri-State Unidirectional SSOP-8 Buffers, Drivers, Receivers, Transceivers ROHS.
PCBKit's library has its KiCad symbol (74xGxx:74LVC2G125, from KiCad's library) and its footprint (Package_SO:SSOP-8_2.95x2.8mm_P0.65mm, from KiCad's library), ready for a KiCad board. 4,889 are in stock at JLCPCB (part C206035).
Symbol
Footprint
From the datasheet
11- Supply, least
- 1.65 V · VCC, recommended operating min · p. 6
- Supply, most
- 5.5 V · VCC, recommended operating max · p. 6
- Supply, absolute maximum
- 6.5 V · VCC, absolute maximum · p. 5
- Works from
- -40 °C · Operating free-air temperature min · p. 6
- Works up to
- 125 °C · Operating free-air temperature max · p. 6
- Junction, hottest
- 150 °C · Junction temperature max · p. 5
- Takes working
- 10 µA · VCC supply current max, VI = 5.5 V or GND, IO = 0 · p. 7
- A pin gives at most
- 50 mA · Continuous output current absolute maximum magnitude · p. 5
- Junction to air (DCT (SM8))
- 199 K/W · Junction-to-ambient thermal resistance · p. 6
- Junction to case (DCT (SM8))
- 89.5 K/W · Junction-to-case (top) thermal resistance · p. 6
- Junction to board (DCT (SM8))
- 118.7 K/W · Junction-to-board thermal resistance · p. 6
What it is and has
6- Function
- Dual bus buffer gate with 3-state outputs · p. 1
- Input tolerance
- 5.5 V · p. 1
- Output drive
- ±24 mA at 3.3 V · p. 1
- Propagation delay
- 4.3 ns maximum at 3.3 V · p. 1
- Latch-up performance
- Exceeds 100 mA per JESD 78, Class II · p. 1
- Protection
- Partial-power-down output isolation prevents damaging backflow when powered down · p. 10
Around it
2- cap 0.1-μF
- between VCC and GND; Bypass capacitor for the single supply; install as close to the power pin as possible. · p. 13
- res not specified
- between 1OE and VCC; Pull-up ensures high impedance during power up or power down; minimum resistance depends on the driver's current-sinking capability. · p. 10
Specifications
104| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage VCC | min -0.5 · max 6.5 V | 5 | |
| Input voltage VI | min -0.5 · max 6.5 V | 5 | |
| Voltage range applied to any output in the high-impedance or power-off state VO | min -0.5 · max 6.5 V | 5 | |
| Voltage range applied to any output in the high or low state VO | Maximum is VCC + 0.5 V | min -0.5 V | 5 |
| Input clamp current IIK | VI < 0 | max -50 mA | 5 |
| Output clamp current IOK | VO < 0 | max -50 mA | 5 |
| Continuous output current IO | ±50 mA limit | max 50 mA | 5 |
| Continuous current through VCC or GND | ±100 mA limit | max 100 mA | 5 |
| Junction temperature TJ | max 150 °C | 5 | |
| Storage temperature Tstg | min -65 · max 150 °C | 5 | |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001 | max 2000 V | 5 |
| Electrostatic discharge V(ESD) | Charged device model (CDM), per JEDEC specification JESD22-C101 | max 1000 V | 5 |
| Supply voltage VCC | Operating | min 1.65 · max 5.5 V | 6 |
| Supply voltage VCC | Data retention only | min 1.5 V | 6 |
| High-level input voltage VIH | VCC = 2.3 V to 2.7 V | min 1.7 V | 6 |
| High-level input voltage VIH | VCC = 3 V to 3.6 V | min 2 V | 6 |
| Low-level input voltage VIL | VCC = 2.3 V to 2.7 V | max 0.7 V | 6 |
| Low-level input voltage VIL | VCC = 3 V to 3.6 V | max 0.8 V | 6 |
| Input voltage VI | min 0 · max 5.5 V | 6 | |
| Output voltage VO | High or low state; maximum VCC | min 0 V | 6 |
| Output voltage VO | 3-state | min 0 · max 5.5 V | 6 |
| High-level output current IOH | VCC = 1.65 V | max -4 mA | 6 |
| High-level output current IOH | VCC = 2.3 V | max -8 mA | 6 |
| High-level output current IOH | VCC = 3 V | max -16 mA | 6 |
| High-level output current IOH | VCC = 3 V | max -24 mA | 6 |
| High-level output current IOH | VCC = 4.5 V | max -32 mA | 6 |
| Low-level output current IOL | VCC = 1.65 V | max 4 mA | 6 |
| Low-level output current IOL | VCC = 2.3 V | max 8 mA | 6 |
| Low-level output current IOL | VCC = 3 V | max 16 mA | 6 |
| Low-level output current IOL | VCC = 3 V | max 24 mA | 6 |
| Low-level output current IOL | VCC = 4.5 V | max 32 mA | 6 |
| Input transition rise or fall rate Δt/Δv | VCC = 1.8 V ± 0.15 V, 2.5 V ± 0.2 V | max 20 ns/V | 6 |
| Input transition rise or fall rate Δt/Δv | VCC = 3.3 V ± 0.3 V | max 10 ns/V | 6 |
| Input transition rise or fall rate Δt/Δv | VCC = 5 V ± 0.5 V | max 5 ns/V | 6 |
| Operating free-air temperature TA | min -40 · max 125 °C | 6 | |
| Junction-to-ambient thermal resistance RθJA | DCT (SM8), 8 PINS | typ 199 °C/W | 6 |
| Junction-to-case (top) thermal resistance RθJCtop | DCT (SM8), 8 PINS | typ 89.5 °C/W | 6 |
| Junction-to-board thermal resistance RθJB | DCT (SM8), 8 PINS | typ 118.7 °C/W | 6 |
| Junction-to-top characterization parameter ψJT | DCT (SM8), 8 PINS | typ 14.3 °C/W | 6 |
| Junction-to-board characterization parameter ψJB | DCT (SM8), 8 PINS | typ 117.4 °C/W | 6 |
| VOH VOH | IOH = –4 mA; VCC = 1.65 V; TA = –40°C to +85°C | min 1.2 V | 7 |
| VOH VOH | IOH = –4 mA; VCC = 1.65 V; TA = –40°C to +125°C | min 1.2 V | 7 |
| VOH VOH | IOH = –8 mA; VCC = 1.8 V; TA = –40°C to +85°C | min 1.4 V | 7 |
| VOH VOH | IOH = –8 mA; VCC = 2.3 V; TA = –40°C to +85°C | min 1.9 V | 7 |
| VOH VOH | IOH = –8 mA; VCC = 2.3 V; TA = –40°C to +125°C | min 1.9 V | 7 |
| VOH VOH | IOH = –16 mA; VCC = 3 V; TA = –40°C to +85°C | min 2.4 V | 7 |
| VOH VOH | IOH = –16 mA; VCC = 3 V; TA = –40°C to +125°C | min 2.4 V | 7 |
| VOH VOH | IOH = –24 mA; VCC = 3 V; TA = –40°C to +85°C | min 2.3 V | 7 |
| VOH VOH | IOH = –24 mA; VCC = 3 V; TA = –40°C to +125°C | min 2.3 V | 7 |
| VOH VOH | IOH = –32 mA; VCC = 4.5 V; TA = –40°C to +85°C | min 3.8 V | 7 |
| VOH VOH | IOH = –32 mA; VCC = 4.5 V; TA = –40°C to +125°C | min 3.8 V | 7 |
| VOL VOL | IOL = 100 uA; VCC = 1.65 V to 5.5 V; TA = –40°C to +85°C | max 0.1 V | 7 |
| VOL VOL | IOL = 100 uA; VCC = 1.65 V to 5.5 V; TA = –40°C to +125°C | max 0.1 V | 7 |
| VOL VOL | IOL = 4 mA; VCC = 1.65 V; TA = –40°C to +85°C | max 0.45 V | 7 |
| VOL VOL | IOL = 4 mA; VCC = 1.65 V; TA = –40°C to +125°C | max 0.45 V | 7 |
| VOL VOL | IOL = 8 mA; VCC = 1.8 V; TA = –40°C to +85°C | max 0.45 V | 7 |
| VOL VOL | IOL = 8 mA; VCC = 2.3 V; TA = –40°C to +85°C | max 0.3 V | 7 |
| VOL VOL | IOL = 8 mA; VCC = 2.3 V; TA = –40°C to +125°C | max 0.3 V | 7 |
| VOL VOL | IOL = 16 mA; VCC = 3 V; TA = –40°C to +85°C | max 0.4 V | 7 |
| VOL VOL | IOL = 16 mA; VCC = 3 V; TA = –40°C to +125°C | max 0.4 V | 7 |
| VOL VOL | IOL = 24 mA; VCC = 3 V; TA = –40°C to +85°C | max 0.55 V | 7 |
| VOL VOL | IOL = 24 mA; VCC = 3 V; TA = –40°C to +125°C | max 0.55 V | 7 |
| VOL VOL | IOL = 32 mA; VCC = 4.5 V; TA = –40°C to +85°C | max 0.55 V | 7 |
| VOL VOL | IOL = 32 mA; VCC = 4.5 V; TA = –40°C to +125°C | max 0.75 V | 7 |
| II II | A or OE inputs; VI = 5.5 V or GND; VCC = 0 to 5.5 V; TA = –40°C to +85°C; ±5 uA limit | max 5 uA | 7 |
| II II | A or OE inputs; VI = 5.5 V or GND; VCC = 0 to 5.5 V; TA = –40°C to +125°C; ±5 uA limit | max 5 uA | 7 |
| Ioff Ioff | VI or VO = 5.5 V; VCC = 0 V; TA = –40°C to +85°C; ±10 uA limit | max 10 uA | 7 |
| Ioff Ioff | VI or VO = 5.5 V; VCC = 0 V; TA = –40°C to +125°C; ±10 uA limit | max 10 uA | 7 |
| IOZ IOZ | VO = 0 to 5.5 V; VCC = 3.6 V; TA = –40°C to +85°C | max 10 uA | 7 |
| IOZ IOZ | VO = 0 to 5.5 V; VCC = 3.6 V; TA = –40°C to +125°C | max 10 uA | 7 |
| ICC ICC | VI = 5.5 V or GND; IO = 0; VCC = 1.65 V to 5.5 V; TA = –40°C to +85°C | max 10 uA | 7 |
| ICC ICC | VI = 5.5 V or GND; IO = 0; VCC = 1.65 V to 5.5 V; TA = –40°C to +125°C | max 10 uA | 7 |
| ΔICC ΔICC | One input at VCC – 0.6 V; other inputs at VCC or GND; VCC = 3 V to 5.5 V; TA = –40°C to +85°C | max 500 uA | 7 |
| ΔICC ΔICC | One input at VCC – 0.6 V; other inputs at VCC or GND; VCC = 3 V to 5.5 V; TA = –40°C to +125°C | max 500 uA | 7 |
| Ci Ci | Data inputs; VI = VCC or GND; VCC = 3.3 V; TA = –40°C to +85°C; typical at TA = 25°C | typ 3.5 pF | 7 |
| Ci Ci | Data inputs; VI = VCC or GND; VCC = 3.3 V; TA = –40°C to +125°C; typical at TA = 25°C | typ 3.5 pF | 7 |
| Ci Ci | Control inputs; VI = VCC or GND; VCC = 3.3 V; TA = –40°C to +85°C; typical at TA = 25°C | typ 4 pF | 7 |
| Ci Ci | Control inputs; VI = VCC or GND; VCC = 3.3 V; TA = –40°C to +125°C; typical at TA = 25°C | typ 4 pF | 7 |
| Co Co | VO = VCC or GND; VCC = 3.3 V; TA = –40°C to +85°C; typical at TA = 25°C | typ 6.5 pF | 7 |
| Co Co | VO = VCC or GND; VCC = 3.3 V; TA = –40°C to +125°C; typical at TA = 25°C | typ 6.5 pF | 7 |
| tpd tpd | A to Y; VCC = 1.8 V ± 0.15 V | min 3.3 · max 9.1 ns | 7 |
| tpd tpd | A to Y; VCC = 2.5 V ± 0.2 V | min 1.5 · max 4.8 ns | 7 |
| tpd tpd | A to Y; VCC = 3.3 V ± 0.3 V | min 1.4 · max 4.3 ns | 7 |
| tpd tpd | A to Y; VCC = 5 V ± 0.5 V | min 1 · max 3.7 ns | 7 |
| ten ten | OE to Y; VCC = 1.8 V ± 0.15 V | min 4 · max 9.9 ns | 7 |
| ten ten | OE to Y; VCC = 2.5 V ± 0.2 V | min 1.9 · max 5.6 ns | 7 |
| ten ten | OE to Y; VCC = 3.3 V ± 0.3 V | min 1.2 · max 4.7 ns | 7 |
| ten ten | OE to Y; VCC = 5 V ± 0.5 V | min 1.2 · max 3.8 ns | 7 |
| tdis tdis | OE to Y; VCC = 1.8 V ± 0.15 V | min 1.5 · max 11.6 ns | 7 |
| tdis tdis | OE to Y; VCC = 2.5 V ± 0.2 V | min 1 · max 5.8 ns | 7 |
| tdis tdis | OE to Y; VCC = 3.3 V ± 0.3 V | min 1.4 · max 4.6 ns | 7 |
| tdis tdis | OE to Y; VCC = 5 V ± 0.5 V | min 1 · max 3.4 ns | 7 |
| tpd tpd | A to Y; VCC = 1.8 V ± 0.15 V | min 3.3 · max 10.1 ns | 7 |
| tpd tpd | A to Y; VCC = 2.5 V ± 0.2 V | min 1.5 · max 5.8 ns | 7 |
| tpd tpd | A to Y; VCC = 3.3 V ± 0.3 V | min 1.4 · max 5.3 ns | 7 |
| tpd tpd | A to Y; VCC = 5 V ± 0.5 V | min 1 · max 4.2 ns | 7 |
| ten ten | OE to Y; VCC = 1.8 V ± 0.15 V | min 4 · max 10.9 ns | 7 |
| ten ten | OE to Y; VCC = 2.5 V ± 0.2 V | min 1.9 · max 6.6 ns | 7 |
| ten ten | OE to Y; VCC = 3.3 V ± 0.3 V | min 1.2 · max 5.7 ns | 7 |
| ten ten | OE to Y; VCC = 5 V ± 0.5 V | min 1.2 · max 4.3 ns | 7 |
| tdis tdis | OE to Y; VCC = 1.8 V ± 0.15 V | min 1.5 · max 12.6 ns | 7 |
| tdis tdis | OE to Y; VCC = 2.5 V ± 0.2 V | min 1 · max 6.8 ns | 7 |
| tdis tdis | OE to Y; VCC = 3.3 V ± 0.3 V | min 1.4 · max 5.6 ns | 7 |
| tdis tdis | OE to Y; VCC = 5 V ± 0.5 V | min 1 · max 3.9 ns | 7 |
Pins, by the datasheet
8- 1 1OE
- Output Enable for buffer 1; high disables the output. · p. 4
- 2 1A
- Input of buffer 1. · p. 4
- 3 2Y
- Output of buffer 2. · p. 4
- 4 GND
- Ground. · p. 4
- 5 2A
- Input of buffer 2. · p. 4
- 6 1Y
- Output of buffer 1. · p. 4
- 7 2OE
- Output Enable for buffer 2; high disables the output. · p. 4
- 8 VCC
- Positive supply. · p. 4
Ordering codes, by the datasheet
3- SN74LVC2G125DCTR
- SM8 (8) · DCT package; body size 2.95 mm × 2.80 mm · p. 1
- SN74LVC2G125DCUR
- VSSOP (8) · DCU package; body size 2.30 mm × 2.00 mm · p. 1
- SN74LVC2G125YZPR
- DSBGA (8) · YZP package; body size 1.91 mm × 0.91 mm · p. 1
Parts like it
8SN74AVC2T45DCTR
SM-8-40℃~+85℃ 1 1.2V~3.6V 12mA 12mA 2 2.4ns@3.3V,50pF 20uA 74AVC Bidirectional Tri-State SM-8 Translators, Level Shifters ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC3G07DCTR
MSOP-8-2.8mm-40℃~+125℃ 1 1.65V~5.5V 10uA 3 3.7ns@3.3V 32mA 74LVC Open-drain Unidirectional MSOP-8-2.8mm Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC3G17DCTR
MSOP-8-2.8mm-40℃~+85℃ 1.65V~5.5V 10uA 3 3 32mA 32mA 5.4ns@3.3V,50pF 74LVC Push-pull Schmitt trigger Unidirectional MSOP-8-2.8mm Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC2G241DCT
SM-8-40℃~+125℃ 1 1.65V~5.5V 10uA 2 32mA 32mA 4.3ns@3.3V,50pF 74LVC Tri-State Unidirectional SM-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC2G240DCT
SSOP-8-40℃~+125℃ 1 1.65V~5.5V 10uA 2 32mA 32mA 4.6ns@3.3V,50pF 74LVC Tri-State Unidirectional SSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC3G34DCTR
MSOP-8-2.8mm-40℃~+125℃ 1 1.4ns@3.3V,50pF 1.65V~5.5V 10uA 24mA 3 32mA 74LVC Unidirectional MSOP-8-2.8mm Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74AUC2G240DCT
SSOP-8-40℃~+85℃ 0.8V~2.7V 1 1.8ns@1.8V,15pF 10uA 2 74AUC 9mA 9mA Tri-State Unidirectional SSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74AUC2G241DCT
SM-8-40℃~+85℃ 0.8V~2.7V 1 1.9ns@1.8V,15pF 10uA 2 74AUC 9mA 9mA Tri-State Unidirectional SM-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
Questions
Is there a KiCad symbol and footprint for the SN74LVC2G125DCT?
Yes. The symbol is 74xGxx:74LVC2G125 and the footprint Package_SO:SSOP-8_2.95x2.8mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the SN74LVC2G125DCT?
SSOP-8, with 8 pins. Its footprint is drawn on this page.
Where is the SN74LVC2G125DCT datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the SN74LVC2G125DCT?
JLCPCB lists it as part C206035, with 4,889 in stock; the sellers' links on this page open their listings.
What can replace the SN74LVC2G125DCT?
Parts like it in the library: the SN74AVC2T45DCTR by Texas Instruments, the SN74LVC3G07DCTR by Texas Instruments, the SN74LVC3G17DCTR by Texas Instruments and the SN74LVC2G241DCT by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.