Skip to the content
1234567891011121314151617181920

SN74LVC244AN

Texas InstrumentsExtended

-40℃~+125℃ 1.65V~3.6V 2 24mA 24mA 3.9ns@3.3V,50pF 4 40uA 74LVC Tri-State Unidirectional PDIP-20 Buffers, Drivers, Receivers, Transceivers ROHS

Part id
ti/SN74LVC244AN
Category
Buffers, Drivers, Receivers, Transceivers
Package
PDIP-20
Pins
20
In stock
77 at JLCPCB (C1548565)
Used on
9 open-source boards

Overview

The SN74LVC244AN is a buffers, Drivers, Receivers, Transceiver made by Texas Instruments in a PDIP-20 package with 20 pins. -40℃~+125℃ 1.65V~3.6V 2 24mA 24mA 3.9ns@3.3V,50pF 4 40uA 74LVC Tri-State Unidirectional PDIP-20 Buffers, Drivers, Receivers, Transceivers ROHS.

PCBKit's library has its KiCad symbol (74xx:74HC244, from KiCad's library) and its footprint (Package_DIP:DIP-20_W7.62mm, from KiCad's library), ready for a KiCad board. 77 are in stock at JLCPCB (part C1548565). 9 open-source boards in 8 repositories on GitHub use it.

Symbol

11OE21A032Y041A152Y161A272Y281A392Y310GND112A3121Y3132A2141Y2152A1161Y1172A0181Y0192OE20VCC
74xx:74HC244From KiCad's library

Footprint

1234567891011121314151617181920
Package_DIP:DIP-20_W7.62mmFrom KiCad's library

Pinout

20
The pins of the SN74LVC244AN
PinNameType
11OEInput
21A0Input
32Y0Tri-state
41A1Input
52Y1Tri-state
61A2Input
72Y2Tri-state
81A3Input
92Y3Tri-state
10GNDPower in
112A3Input
121Y3Tri-state
132A2Input
141Y2Tri-state
152A1Input
161Y1Tri-state
172A0Input
181Y0Tri-state
192OEInput
20VCCPower in

Open-source boards using it

9See all 9
  • 6 layers144.8 × 106.7 mmLoriques, the printed circuit board in 3D

    Loriques

    skot/Loriques

    A solar powered Meshtastic LoRa gateway

    122 parts17CERN-OHL-S-2.0
  • 2 layers95.3 × 50.8 mmTinyDiskII, the printed circuit board in 3D

    TinyDiskII

    GLGPrograms/tinyDiskII

    Homemade floppy disk emulator for Apple II series computers

    52 parts12GPL-3.0
  • 6 layers158 × 124 mmBP16, the printed circuit board in 3D

    BP16

    auselia/adc_test_board

    ADS7057 test board: perfboard SMA -> filters -> ADC + wake comparator -> ZedBoard PMOD (KiCad 10, JLCPCB-ready)

    174 parts
  • 2 layers53.6 × 72.4 mmGlyphblaster, the printed circuit board in 3D

    Glyphblaster

    dbalsom/GlyphBlasterPCB

    The KiCad PCB project files for the GlyphBlaster

    25 parts
  • 4 layers160 × 135 mmZ80 romless sbc, the printed circuit board in 3D

    Z80 romless sbc

    gloveboxes/pcb-z80

    pcb-z80 is a container-only, repeatable build of the four-layer Z80 ROMless SBC PCB engineering design. It regenerates the KiCad schematic, places the four-layer board, routes a fresh Specctra session, imports and fills…

    55 partsMIT
  • 2 layers40 × 45 mmLevel Shifter Board, the printed circuit board in 3D

    Level Shifter Board

    suidroot/LevelShifter

    A Board Design for the SN74LVC244 chip to shift from 5v to 3.3v

    10 parts
  • 4 layers81 × 46 mmXTMAX PCB, the printed circuit board in 3D

    XTMAX PCB

    MicroCoreLabs/Projects

    Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.

    14 parts534
  • 4 layers85 × 96 mmZ80 romless sbc, the printed circuit board in 3D

    Z80 romless sbc

    gloveboxes/Z80ROMlessSBC

    This is a separate KiCad project for a 98.3 × 60 mm, four-layer board. JLCPCB assembles every top-side SMT part, including the Raspberry Pi Pico 2 W module, and only four parts are hand-soldered:

    34 parts1MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SN74LVC244AN?

Yes. The symbol is 74xx:74HC244 and the footprint Package_DIP:DIP-20_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SN74LVC244AN?

PDIP-20, with 20 pins. Its footprint is drawn on this page.

Where is the SN74LVC244AN datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the SN74LVC244AN?

JLCPCB lists it as part C1548565, with 77 in stock; the sellers' links on this page open their listings.

What can replace the SN74LVC244AN?

Parts like it in the library: the 74HC541D by GR, the SN74HC240N(XBLW) by XBLW, the SN74HC244N(XBLW) by XBLW and the 74HC245N by HGSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SN74LVC244AN?

9 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.