Skip to the content
12345678

SN74LVC1G74DCU

Texas InstrumentsExtended

-40℃~+125℃ 1 1 1.1ns 1.65V~5.5V 10uA 200MHz 32mA 32mA 500ps 5pF 6.4ns@5V,50pF 74LVC Series Complementary D-Type Rising Edge Set and Reset VSSOP-8 Flip Flops ROHS

Part id
ti/SN74LVC1G74DCU
Category
Flip Flops
Package
VSSOP-8-0.5mm
Pins
8
In stock
12,627 at JLCPCB (C70285)
Used on
5 open-source boards

Overview

The SN74LVC1G74DCU is a flip Flop made by Texas Instruments in a VSSOP-8-0.5mm package with 8 pins. -40℃~+125℃ 1 1 1.1ns 1.65V~5.5V 10uA 200MHz 32mA 32mA 500ps 5pF 6.4ns@5V,50pF 74LVC Series Complementary D-Type Rising Edge Set and Reset VSSOP-8 Flip Flops ROHS.

PCBKit's library has its KiCad symbol (74xGxx:74AUC1G74, from KiCad's library) and its footprint (Package_SO:VSSOP-8_2.3x2mm_P0.5mm, from KiCad's library), ready for a KiCad board. 12,627 are in stock at JLCPCB (part C70285). 5 open-source boards in 3 repositories on GitHub use it.

Symbol

1C2D3Q4GND5Q6CLR7PRE8VCC
74xGxx:74AUC1G74From KiCad's library

Footprint

12345678
Package_SO:VSSOP-8_2.3x2mm_P0.5mmFrom KiCad's library

From the datasheet

8
Supply, least
1.65 V · VCC, recommended operating min · p. 6
Supply, most
5.5 V · VCC, recommended operating max · p. 6
Supply, absolute maximum
6.5 V · VCC, absolute maximum · p. 5
Works from
-40 °C · DCU operating free-air temperature min · p. 6
Works up to
125 °C · DCU operating free-air temperature max · p. 6
Takes working
10 µA · VCC supply current max, VI = 5.5 V or GND, IO = 0 · p. 7
A pin gives at most
50 mA · Continuous output current absolute maximum magnitude · p. 5
Junction to air (DCU)
227 K/W · Junction-to-ambient thermal resistance · p. 6

What it is and has

5
Function
Single positive-edge-triggered D-type flip-flop with clear and preset · p. 1
Input voltage tolerance
Up to 5.5 V · p. 1
Output drive
±24 mA at 3.3 V · p. 1
Protection
Ioff supports live insertion, partial power-down mode and back-drive protection · p. 1
Latch-up performance
Exceeds 100 mA per JESD 78 Class II · p. 1

Around it

1
cap 0.1-μF
between VCC and GND; Recommended bypass capacitor for this single-supply device; install as close to the power terminal as possible. · p. 12

Specifications

110
ParameterConditionsAs printedPage
Supply voltage range VCCOver operating free-air temperature rangemin -0.5 · max 6.5 V5
Input voltage range(2) VIOver operating free-air temperature rangemin -0.5 · max 6.5 V5
Voltage range applied to any output in the high-impedance or power-off state(2) VOHigh-impedance or power-off statemin -0.5 · max 6.5 V5
Voltage range applied to any output in the high or low state(2) (3) VOHigh or low state; maximum = VCC + 0.5 Vmin -0.5 V5
Input clamp current IIKVI < 0max -50 mA5
Output clamp current IOKVO < 0max -50 mA5
Continuous output current IOLimit printed as ±50 mA; max is magnitudemax 50 mA5
Continuous current through VCC or GNDLimit printed as ±100 mA; max is magnitudemax 100 mA5
Storage temperature range Tstgmin -65 · max 150 °C5
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins(1); table VALUEmax 2000 V5
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pins(2); table VALUEmax 1000 V5
Supply voltage VCCOperatingmin 1.65 · max 5.5 V6
Supply voltage VCCData retention onlymin 1.5 V6
High-level input voltage VIHVCC = 2.3 V to 2.7 Vmin 1.7 V6
High-level input voltage VIHVCC = 3 V to 3.6 Vmin 2 V6
Low-level input voltage VILVCC = 2.3 V to 2.7 Vmax 0.7 V6
Low-level input voltage VILVCC = 3 V to 3.6 Vmax 0.8 V6
Input voltage VImin 0 · max 5.5 V6
Output voltage VOMaximum = VCCmin 0 V6
High-level output current IOHVCC = 1.65 Vmax -4 mA6
High-level output current IOHVCC = 2.3 Vmax -8 mA6
High-level output current IOHVCC = 3 Vmax -16 mA6
High-level output current IOHVCC = 3 Vmax -24 mA6
High-level output current IOHVCC = 4.5 Vmax -32 mA6
Low-level output current IOLVCC = 1.65 Vmax 4 mA6
Low-level output current IOLVCC = 2.3 Vmax 8 mA6
Low-level output current IOLVCC = 3 Vmax 16 mA6
Low-level output current IOLVCC = 3 Vmax 24 mA6
Low-level output current IOLVCC = 4.5 Vmax 32 mA6
Input transition rise or fall rate Δt/ΔvVCC = 1.8 V ± 0.15 V, 2.5 V ± 0.2 Vmax 20 ns/V6
Input transition rise or fall rate Δt/ΔvVCC = 3.3 V ± 0.3 Vmax 10 ns/V6
Input transition rise or fall rate Δt/ΔvVCC = 5 V ± 0.5 Vmax 5 ns/V6
Operating free-air temperature TADCU Packagemin -40 · max 125 °C6
Junction-to-ambient thermal resistance RθJADCU, 8 PINStyp 227 °C/W6
VOH VOHIOH = –4 mA; VCC = 1.65 Vmin 1.2 V7
VOH VOHIOH = –8 mA; VCC = 2.3 Vmin 1.9 V7
VOH VOHIOH = –16 mA; VCC = 3 Vmin 2.4 V7
VOH VOHIOH = –24 mA; VCC = 3 Vmin 2.3 V7
VOH VOHIOH = –32 mA; VCC = 4.5 Vmin 3.8 V7
VOL VOLIOL = 100 uA; VCC = 1.65 V to 5.5 Vmax 0.1 V7
VOL VOLIOL = 4 mA; VCC = 1.65 Vmax 0.45 V7
VOL VOLIOL = 8 mA; VCC = 2.3 Vmax 0.3 V7
VOL VOLIOL = 16 mA; VCC = 3 Vmax 0.4 V7
VOL VOLIOL = 24 mA; VCC = 3 Vmax 0.55 V7
VOL VOLIOL = 32 mA; VCC = 4.5 Vmax 0.55 V7
Data or control inputs IIVI = 5.5 V or GND; VCC = 0 to 5.5 V; limit ±5 uAmax 5 uA7
Ioff IoffVI or VO = 5.5 V; VCC = 0; limit ±10 uAmax 10 uA7
ICC ICCVI = 5.5 V or GND, IO = 0; VCC = 1.65 V to 5.5 Vmax 10 uA7
ΔICC ΔICCOne input at VCC – 0.6 V, Other inputs at VCC or GND; VCC = 3 V to 5.5 Vmax 500 uA7
Ci CiVI = VCC or GND; VCC = 3.3 V; TA = 25°Ctyp 5 pF7
fclock fclock–40°C to 85°C; VCC = 1.8 Vmax 80 MHz7
fclock fclock–40°C to 85°C; VCC = 2.5 Vmax 175 MHz7
fclock fclock–40°C to 85°C; VCC = 3.3 Vmax 175 MHz7
fclock fclock–40°C to 85°C; VCC = 5 Vmax 200 MHz7
fclock fclock–40°C to 125°C; VCC = 3.3 Vmax 175 MHz7
fclock fclock–40°C to 125°C; VCC = 5 Vmax 200 MHz7
tw twCLK; –40°C to 85°C; VCC = 1.8 Vmin 6.2 ns7
tw twCLK; –40°C to 85°C; VCC = 2.5 Vmin 2.7 ns7
tw twCLK; –40°C to 85°C; VCC = 3.3 Vmin 2.7 ns7
tw twCLK; –40°C to 85°C; VCC = 5 Vmin 2 ns7
tw twCLK; –40°C to 125°C; VCC = 3.3 Vmin 2.7 ns7
tw twCLK; –40°C to 125°C; VCC = 5 Vmin 2 ns7
tw twPRE or CLR low; –40°C to 85°C; VCC = 1.8 Vmin 6.2 ns7
tw twPRE or CLR low; –40°C to 85°C; VCC = 2.5 Vmin 2.7 ns7
tw twPRE or CLR low; –40°C to 85°C; VCC = 3.3 Vmin 2.7 ns7
tw twPRE or CLR low; –40°C to 85°C; VCC = 5 Vmin 2 ns7
tw twPRE or CLR low; –40°C to 125°C; VCC = 3.3 Vmin 2.7 ns7
tw twPRE or CLR low; –40°C to 125°C; VCC = 5 Vmin 2 ns7
tsu tsuData; –40°C to 85°C; VCC = 1.8 Vmin 2.9 ns7
tsu tsuData; –40°C to 85°C; VCC = 2.5 Vmin 1.7 ns7
tsu tsuData; –40°C to 85°C; VCC = 3.3 Vmin 1.3 ns7
tsu tsuData; –40°C to 85°C; VCC = 5 Vmin 1.1 ns7
tsu tsuData; –40°C to 125°C; VCC = 3.3 Vmin 1.3 ns7
tsu tsuData; –40°C to 125°C; VCC = 5 Vmin 1.1 ns7
tsu tsuPRE or CLR inactive; –40°C to 85°C; VCC = 1.8 Vmin 1.9 ns7
tsu tsuPRE or CLR inactive; –40°C to 85°C; VCC = 2.5 Vmin 1.4 ns7
tsu tsuPRE or CLR inactive; –40°C to 85°C; VCC = 3.3 Vmin 1.2 ns7
tsu tsuPRE or CLR inactive; –40°C to 85°C; VCC = 5 Vmin 1 ns7
tsu tsuPRE or CLR inactive; –40°C to 125°C; VCC = 3.3 Vmin 1.2 ns7
tsu tsuPRE or CLR inactive; –40°C to 125°C; VCC = 5 Vmin 1.2 ns7
th th–40°C to 85°C; VCC = 1.8 Vmin 0 ns7
th th–40°C to 85°C; VCC = 2.5 Vmin 0.3 ns7
th th–40°C to 85°C; VCC = 3.3 Vmin 1.2 ns7
th th–40°C to 85°C; VCC = 5 Vmin 0.5 ns7
th th–40°C to 125°C; VCC = 3.3 Vmin 1.2 ns7
th th–40°C to 125°C; VCC = 5 Vmin 0.5 ns7
fmax fmax–40°C to 85°C; VCC = 1.8 Vmin 80 MHz7
fmax fmax–40°C to 85°C; VCC = 2.5 Vmin 175 MHz7
fmax fmax–40°C to 85°C; VCC = 3.3 Vmin 175 MHz7
fmax fmax–40°C to 85°C; VCC = 5 Vmin 200 MHz7
fmax fmax–40°C to 125°C; VCC = 3.3 Vmin 175 MHz7
fmax fmax–40°C to 125°C; VCC = 5 Vmin 200 MHz7
tpd tpdCLK to Q; –40°C to 85°C; VCC = 1.8 Vmin 4.8 · max 13.4 ns7
tpd tpdCLK to Q; –40°C to 85°C; VCC = 2.5 Vmin 2.2 · max 7.1 ns7
tpd tpdCLK to Q; –40°C to 85°C; VCC = 3.3 Vmin 2.2 · max 5.9 ns7
tpd tpdCLK to Q; –40°C to 85°C; VCC = 5 Vmin 1.4 · max 4.1 ns7
tpd tpdCLK to Q; –40°C to 125°C; VCC = 3.3 Vmin 2.2 · max 7.9 ns7
tpd tpdCLK to Q; –40°C to 125°C; VCC = 5 Vmin 1.4 · max 6.1 ns7
tpd tpdCLK to inverted Q; –40°C to 85°C; VCC = 1.8 Vmin 6 · max 14.4 ns7
tpd tpdCLK to inverted Q; –40°C to 85°C; VCC = 2.5 Vmin 3 · max 7.7 ns7
tpd tpdCLK to inverted Q; –40°C to 85°C; VCC = 3.3 Vmin 2.6 · max 6.2 ns7
tpd tpdCLK to inverted Q; –40°C to 85°C; VCC = 5 Vmin 1.6 · max 4.4 ns7
tpd tpdCLK to inverted Q; –40°C to 125°C; VCC = 3.3 Vmin 2.6 · max 8.2 ns7
tpd tpdCLK to inverted Q; –40°C to 125°C; VCC = 5 Vmin 1.6 · max 6.4 ns7
tpd tpdPRE or CLR low to Q or inverted Q; –40°C to 85°C; VCC = 1.8 Vmin 4.4 · max 12.9 ns7
tpd tpdPRE or CLR low to Q or inverted Q; –40°C to 85°C; VCC = 2.5 Vmin 2.3 · max 7 ns7
tpd tpdPRE or CLR low to Q or inverted Q; –40°C to 85°C; VCC = 3.3 Vmin 1.7 · max 5.9 ns7
tpd tpdPRE or CLR low to Q or inverted Q; –40°C to 85°C; VCC = 5 Vmin 1.6 · max 4.1 ns7
tpd tpdPRE or CLR low to Q or inverted Q; –40°C to 125°C; VCC = 3.3 Vmin 1.7 · max 7.9 ns7
tpd tpdPRE or CLR low to Q or inverted Q; –40°C to 125°C; VCC = 5 Vmin 1.6 · max 6.1 ns7

Pins, by the datasheet

8
1 CLK
Clock input. · p. 4
2 D
Data input. · p. 4
3 Q
Inverted output. · p. 4
4 GND
Ground. · p. 4
5 Q
Output. · p. 4
6 CLR
Clear input; pull low to set Q output low. · p. 4
7 PRE
Preset input; pull low to set Q output high. · p. 4
8 VCC
Supply. · p. 4

Ordering codes, by the datasheet

3
SN74LVC1G74DCUR
VSSOP (DCU), 8 pins · Package quantity 3000; lead finish NIPDAU | SN; operating temperature -40 to 125 °C. · p. 16
SN74LVC1G74DCURG4
VSSOP (DCU), 8 pins · Package quantity 3000; lead finish NIPDAU; operating temperature -40 to 125 °C. · p. 16
SN74LVC1G74DCUT
VSSOP (DCU), 8 pins · Package quantity 250; lead finish NIPDAU | SN; operating temperature -40 to 125 °C. · p. 16

Open-source boards using it

5
  • 2 layers110 × 46 mmRover panel supervisor, the printed circuit board in 3D

    Rover panel supervisor

    karimf1/rover-panel-pcb

    This repository is continuation of rover panel repo. Power panel PCB layout is implemented in KiCAD based of AutoCAD version of rover panel .

    106 partsMIT
  • 4 layers130 × 95 mmAx7010 servo reva, the printed circuit board in 3D

    Ax7010 servo reva

    magic-alt/fpga-servo

    This directory preserves the ADS8588S legacy PCB, native project and custom rules from b0172a2f65902c7281cf4a8454f192dc791a9ef9.

    183 parts
  • 4 layers85 × 70 mmKICAD HT, the printed circuit board in 3D

    KICAD HT

    Nicolboy/KICAD-C2000-float-flyback

    Alimentation flyback isolée et flottante 200kHz (11-25V→5,5-13V/3A) pour chauffage filament tube + préampli bas bruit — KiCad 10.

    168 partsCERN-OHL-S-2.0
  • 2 layers130 × 95 mmAx7010 servo reva, the printed circuit board in 3D

    Ax7010 servo reva

    magic-alt/fpga-servo

    This directory preserves the ADS8588S legacy PCB, native project and custom rules from b0172a2f65902c7281cf4a8454f192dc791a9ef9.

    166 parts
  • 2 layers130 × 95 mmBefore, the printed circuit board in 3D

    Before

    magic-alt/fpga-servo

    This directory preserves the ADS8588S legacy PCB, native project and custom rules from b0172a2f65902c7281cf4a8454f192dc791a9ef9.

    162 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SN74LVC1G74DCU?

Yes. The symbol is 74xGxx:74AUC1G74 and the footprint Package_SO:VSSOP-8_2.3x2mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SN74LVC1G74DCU?

VSSOP-8-0.5mm, with 8 pins. Its footprint is drawn on this page.

Where is the SN74LVC1G74DCU datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the SN74LVC1G74DCU?

JLCPCB lists it as part C70285, with 12,627 in stock; the sellers' links on this page open their listings.

What can replace the SN74LVC1G74DCU?

Parts like it in the library: the SN74LVC2G74DCU by Texas Instruments, the 74LVC1G74DP-Q100H by Nexperia, the CJ74LVC1G175R6N by Jiangsu Changjing Electronics Technology (CJ) and the CJ74LVC1G74AAN by Jiangsu Changjing Electronics Technology (CJ). Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SN74LVC1G74DCU?

5 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.