Skip to the content
12345678

OPA333AID

Texas InstrumentsExtended

-2.75V~-900mV、900mV~2.75V -40℃~+125℃ 0.16V/us 1 1.8V~5.5V 130dB 140pA 17uA 20nV/℃ 2uV 350kHz 5mA 70pA Rail-to-Rail Input, Rail-to-Rail Output Zero drift / auto-zero、ESD protection、Built-in compensation、Overvoltage protection、Reverse-phase input protection SOIC-8 Precision Op Amps ROHS

Part id
ti/OPA333AID
Category
Precision Op Amps
Package
SOIC-8
Pins
8
In stock
5,961 at JLCPCB (C13717)
Used on
4 open-source boards

Overview

The OPA333AID is a precision Op Amp made by Texas Instruments in a SOIC-8 package with 8 pins. -2.75V~-900mV、900mV~2.75V -40℃~+125℃ 0.16V/us 1 1.8V~5.5V 130dB 140pA 17uA 20nV/℃ 2uV 350kHz 5mA 70pA Rail-to-Rail Input, Rail-to-Rail Output Zero drift / auto-zero、ESD protection、Built-in compensation、Overvoltage protection、Reverse-phase input protection SOIC-8 Precision Op Amps ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:OPA333xxD, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 5,961 are in stock at JLCPCB (part C13717). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

2-3+4V-67V+
Amplifier_Operational:OPA333xxDFrom KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

11
Supply, least
1.8 V · VS, recommended operating, min · p. 5
Supply, most
5.5 V · VS, recommended operating, max · p. 5
Supply, absolute maximum
7 V · VS, absolute maximum · p. 4
Works from
-40 °C · TA, operating range, min · p. 7
Works up to
150 °C · TA, operating range, max · p. 7
Junction, hottest
150 °C · junction temperature, absolute maximum · p. 4
Takes working
17 µA · quiescent current per amplifier, IO = 0 A, typical · p. 7
Takes at most
28 µA · quiescent current per amplifier, TA = -40°C to 125°C, max · p. 7
Junction to air (D(SOIC))
140.1 K/W · junction-to-ambient thermal resistance · p. 5
Junction to board (D(SOIC))
80.6 K/W · junction-to-board thermal resistance · p. 5
Junction to case (D(SOIC))
89.8 K/W · junction-to-case (top) thermal resistance · p. 5

Open-source boards using it

4
  • 4 layers70 × 40 mmLora daq module, the printed circuit board in 3D

    Lora daq module

    danielkm-ee/lora_daq_module

    This board is powered by the Seeed Studios Wio-E5 LoRA module for use with it's designated antenna.

    81 parts1MIT
  • 4 layers70 × 70 mmSensor, the printed circuit board in 3D

    Sensor

    aesirkth/Sigurd

    Propulsion Sensor Unit

    161 parts
  • 2 layersEeg active electrode, the printed circuit board in 3D

    Eeg active electrode

    carlos-lorenzo/eeg-active-electrode

    Design files for active electrodes to be used in an EEG headset

    8 partsGPL-3.0
  • 4 layers15 × 11 mmEMG INA331, the printed circuit board in 3D

    EMG INA331

    Aightech/CleverHand-hardware

    46 parts17GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the OPA333AID?

Yes. The symbol is Amplifier_Operational:OPA333xxD and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPA333AID?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the OPA333AID datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPA333AID?

JLCPCB lists it as part C13717, with 5,961 in stock; the sellers' links on this page open their listings.

What can replace the OPA333AID?

Parts like it in the library: the GS8552-SR by Gainsil, the OPA2192ID by Texas Instruments, the LMC6482AIMX by Texas Instruments and the OPA2188AID by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPA333AID?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.