Skip to the content
12345678

OPA2172ID

Texas InstrumentsExtended

-18V~-2.25V、2.25V~18V -40℃~+125℃ 1.6mA 10MHz 10V/us 120dB 1nA 2 200uV 300nV/℃ 4.5V~36V 75mA 7nV/√Hz@1kHz 8pA EMI filtering/RF suppression Rail-to-rail output SOIC-8 Operational Amplifier ROHS

Part id
ti/OPA2172ID
Category
Operational Amplifier
Package
SOIC-8
Pins
8
In stock
6,386 at JLCPCB (C545167)
Used on
4 open-source boards

Overview

The OPA2172ID is an operational Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -18V~-2.25V、2.25V~18V -40℃~+125℃ 1.6mA 10MHz 10V/us 120dB 1nA 2 200uV 300nV/℃ 4.5V~36V 75mA 7nV/√Hz@1kHz 8pA EMI filtering/RF suppression Rail-to-rail output SOIC-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LM2903HYPT, from EasyEDA) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 6,386 are in stock at JLCPCB (part C545167). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

GND4VCC8OUT11IN1(-)2IN1(+)3
EasyEDA_Cloud:LM2903HYPTFrom EasyEDA

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the OPA2172ID
PinNameType
1OUT1Output
2IN1(-)Unspecified
3IN1(+)Unspecified
4GNDUnspecified
5IN2(+)Unspecified
6IN2(-)Unspecified
7OUT2Output
8VCCUnspecified

Open-source boards using it

4
  • 2 layers50.8 × 107.9 mmAnalog rev3, the printed circuit board in 3D

    Analog rev3

    PaulStoffregen/O_C_T41

    Ornament and Crime Optimized With Teensy 4.1

    202 parts164
  • 6 layers160 × 100 mmAdrmu6layer, the printed circuit board in 3D

    Adrmu6layer

    marcoreps/ADRmu

    ADR1000 10V standard

    240 parts149
  • 4 layers162 × 100 mmIGBT board, the printed circuit board in 3D

    IGBT board

    paltatech/half-bridge

    TO247 half bridge module for EVs

    260 parts18
  • 2 layers250 × 121 mmPWM Schematic, the printed circuit board in 3D

    PWM Schematic

    Shriniketpk2124/Design-Assembly-and-Commissioning-of-a-GreenPHY-Based-EVSE-Signalling-and-Communication-Emulator

    Mixed-signal EVSE prototype for IEC 61851 control-pilot signalling, Green PHY/SLAC, and ISO 15118-2 communication experiments.

    109 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the OPA2172ID?

Yes. The symbol is EasyEDA_Cloud:LM2903HYPT and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPA2172ID?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the OPA2172ID datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPA2172ID?

JLCPCB lists it as part C545167, with 6,386 in stock; the sellers' links on this page open their listings.

What can replace the OPA2172ID?

Parts like it in the library: the TS922IDT by STMicroelectronics, the LMV358B-SR by 3PEAK, the MC33178D by onsemi and the BUF634AID by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPA2172ID?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.