Skip to the content
12345678

OPA2140AID

Texas InstrumentsExtended

-18V~-2.25V、2.25V~18V -40℃~+125℃ 0.35uV/℃ 1.8mA 10pA 10pA 11MHz 120dB 120uV 2 20V/us 36mA 4.5V~36V 5.1nV/√Hz@1kHz Rail-to-rail output Short-Circuit Protection SOIC-8 FET Input Amplifiers ROHS

Part id
ti/OPA2140AID
Category
FET Input Amplifiers
Package
SOIC-8
Pins
8
In stock
30 at JLCPCB (C335586)
Used on
9 open-source boards

Overview

The OPA2140AID is a FET Input Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -18V~-2.25V、2.25V~18V -40℃~+125℃ 0.35uV/℃ 1.8mA 10pA 10pA 11MHz 120dB 120uV 2 20V/us 36mA 4.5V~36V 5.1nV/√Hz@1kHz Rail-to-rail output Short-Circuit Protection SOIC-8 FET Input Amplifiers ROHS.

PCBKit's library has its KiCad symbol (Operational Amplifiers:Operational Amplifier x2 Type1 [alt], from CERN's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 30 are in stock at JLCPCB (part C335586). 9 open-source boards in 7 repositories on GitHub use it.

Symbol

84321
Operational Amplifiers:Operational Amplifier x2 Type1 [alt]From CERN's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the OPA2140AID
PinNameType
1OUTOutput
2IN-Input
3IN+Input
4V-Power in
5IN+Input
6IN-Input
7OUTOutput
8V+Power in

Open-source boards using it

9See all 9
  • 4 layers101 × 47 mmTdr, the printed circuit board in 3D

    Tdr

    loxodes/tdr

    Prototype time domain reflectometer/sampling oscilloscope

    240 parts58MIT
  • 4 layers82.8 × 88.9 mmMetal detector test, the printed circuit board in 3D

    Metal detector test

    bobasaurus/lumber-plunder-metal-detector

    A VLF induction balance metal detector with a wooden body

    111 parts11GPL-3.0
  • 2 layers150 × 53.5 mmDiy smu, the printed circuit board in 3D

    Diy smu

    sverrham/diy-smu

    DIY Source Measurement Unit, four quadrant powersupply and ?.? digit volt/current meter.

    209 parts2
  • 2 layers53 × 23 mmMaam 011109 bias, the printed circuit board in 3D

    Maam 011109 bias

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    52 parts205
  • 6 layersVna mm synth, the printed circuit board in 3D

    Vna mm synth

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    435 parts205
  • 4 layers50 × 20 mmRobustEEG AFE, the printed circuit board in 3D

    RobustEEG AFE

    ppolGTMonster/RobustEEG_forUHFMRI

    Hardware for an Open Source EEG usable in high magnetic Fields

    58 parts1
  • 4 layers160 × 100 mmADRmu, the printed circuit board in 3D

    ADRmu

    kitspace-test-repos/kicad6-file-collection

    151 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the OPA2140AID?

Yes. The symbol is Operational Amplifiers:Operational Amplifier x2 Type1 [alt] and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPA2140AID?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the OPA2140AID datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPA2140AID?

JLCPCB lists it as part C335586, with 30 in stock; the sellers' links on this page open their listings.

What can replace the OPA2140AID?

Parts like it in the library: the TL072CDT by STMicroelectronics, the TL082CDT by STMicroelectronics, the TL082IDT by STMicroelectronics and the OPA2810ID by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPA2140AID?

9 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.