
OPA1622IDRCR
Texas InstrumentsExtended
-18V~-2V、2V~18V -40℃~+125℃ 0.000149% 142mW×1@32Ω 2 Pairs Differential Inputs 2-Channel 2.6mA Automatic mute/no-noise switch、Enable/shutdown function VSON-10-EP(3x3) Audio Amplifiers ROHS
- Part id
- ti/OPA1622IDRCR
- Category
- Audio Amplifiers
- Package
- VSON-10-EP(3x3)
- Pins
- 11
- In stock
- 302 at JLCPCB (C2876559)
- Used on
- 4 open-source boards
Overview
The OPA1622IDRCR is an audio Amplifier made by Texas Instruments in a VSON-10-EP(3x3) package with 11 pins. -18V~-2V、2V~18V -40℃~+125℃ 0.000149% 142mW×1@32Ω 2 Pairs Differential Inputs 2-Channel 2.6mA Automatic mute/no-noise switch、Enable/shutdown function VSON-10-EP(3x3) Audio Amplifiers ROHS.
PCBKit's library has its KiCad symbol (Amplifier_Audio:OPA1622, from KiCad's library) and its footprint (Package_SON:Texas_S-PVSON-N10, from KiCad's library), ready for a KiCad board. 302 are in stock at JLCPCB (part C2876559). 4 open-source boards in 4 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
15- Supply, least
- 4 V · V+ – V–, single-supply recommended minimum · p. 4
- Supply, most
- 36 V · V+ – V–, single-supply recommended maximum · p. 4
- Supply, least
- 2 V · V+, dual-supply positive rail recommended minimum · p. 4
- Supply, most
- 18 V · V+, dual-supply positive rail recommended maximum · p. 4
- Supply, least
- 18 V · V–, dual-supply negative rail recommended minimum · p. 4
- Supply, most
- 2 V · V–, dual-supply negative rail recommended maximum · p. 4
- Supply, absolute maximum
- 40 V · V+ – V–, absolute maximum · p. 4
- Works from
- -40 °C · specified operating free-air temperature minimum · p. 4
- Works up to
- 125 °C · specified operating free-air temperature maximum · p. 4
- Junction, hottest
- 200 °C · junction temperature absolute maximum · p. 4
- Takes working
- 2.6 mA · typical quiescent current per channel, VEN = 2.0 V, IOUT = 0 A · p. 6
- Takes asleep
- 5 µA · typical shutdown current per channel, VEN = 0 V, IOUT = 0 A · p. 6
- Junction to air (DRC (SON))
- 47.6 K/W · junction-to-ambient thermal resistance · p. 4
- Junction to case (DRC (SON))
- 58.1 K/W · junction-to-case top thermal resistance · p. 4
- Junction to board (DRC (SON))
- 22 K/W · junction-to-board thermal resistance · p. 4
What it is and has
9- Amplifier channels
- Dual, bipolar-input audio operational amplifier · p. 1
- Input voltage noise density
- 2.8 nV/√Hz at 1 kHz · p. 1
- Gain bandwidth product
- 32 MHz at G = +1000 · p. 1
- Slew rate
- 10 V/μs · p. 1
- Capacitive-load drive capability
- > 600 pF · p. 1
- Open-loop gain
- 136 dB with 600-Ω load · p. 1
- Protection
- Short-circuit protection · p. 1
- Package
- VSON (10), 3.00 mm × 3.00 mm · p. 1
- Thermal shutdown
- Disables amplifier above 175ºC junction temperature · p. 15
Specifications
66| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage, VS = (V+) – (V–) VS | Over operating free-air temperature range | max 40 V | 4 |
| Input differential voltage | Bipolar limit, ±0.5 V | max 0.5 V | 4 |
| Input current (all pins except power-supply pins) | Bipolar limit, ±10 mA | max 10 mA | 4 |
| Operating, TA TA | min -55 · max 125 °C | 4 | |
| Junction, TJ TJ | max 200 °C | 4 | |
| Storage, Tstg Tstg | min -65 · max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±4000 V | max 4000 V | 4 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101; ±1500 V | max 1500 V | 4 |
| Supply voltage, (V+) – (V–) | Single-supply | min 4 · max 36 V | 4 |
| Supply voltage, (V+) – (V–) | Dual-supply; symmetric rail magnitudes, ±2 V to ±18 V | min 2 · max 18 V | 4 |
| Specified temperature | Operating free-air temperature | min -40 · max 125 °C | 4 |
| Junction-to-ambient thermal resistance RθJA | OPA1622, DRC (SON), 10 PINS | typ 47.6 °C/W | 4 |
| Junction-to-case (top) thermal resistance RθJC(top) | OPA1622, DRC (SON), 10 PINS | typ 58.1 °C/W | 4 |
| Junction-to-board thermal resistance RθJB | OPA1622, DRC (SON), 10 PINS | typ 22 °C/W | 4 |
| Junction-to-top characterization parameter ψJT | OPA1622, DRC (SON), 10 PINS | typ 0.9 °C/W | 4 |
| Junction-to-board characterization parameter ψJB | OPA1622, DRC (SON), 10 PINS | typ 22.2 °C/W | 4 |
| Junction-to-case (bottom) thermal resistance RθJC(bot) | OPA1622, DRC (SON), 10 PINS | typ 4.1 °C/W | 4 |
| Total harmonic distortion + noise THD+N | G = 1, f = 1 kHz, VOUT = 3.5 VRMS, RL = 2 kΩ, 80-kHz measurement bandwidth | typ 0.000024 % | 5 |
| Total harmonic distortion + noise THD+N | G = 1, f = 1 kHz, VOUT = 3.5 VRMS, RL = 2 kΩ, 80-kHz measurement bandwidth | typ -132 dB | 5 |
| Total harmonic distortion + noise THD+N | G = 1, f = 1 kHz, VOUT = 3.5 VRMS, RL = 600 Ω, 80-kHz measurement bandwidth | typ 0.000025 % | 5 |
| Total harmonic distortion + noise THD+N | G = 1, f = 1 kHz, VOUT = 3.5 VRMS, RL = 600 Ω, 80-kHz measurement bandwidth | typ -132 dB | 5 |
| Total harmonic distortion + noise THD+N | G = 1, f = 1 kHz, POUT = 10 mW, RL = 128 Ω, 80-kHz measurement bandwidth | typ 0.000071 % | 5 |
| Total harmonic distortion + noise THD+N | G = 1, f = 1 kHz, POUT = 10 mW, RL = 128 Ω, 80-kHz measurement bandwidth | typ -123 dB | 5 |
| Total harmonic distortion + noise THD+N | G = 1, f = 1 kHz, POUT = 10 mW, RL = 32 Ω, 80-kHz measurement bandwidth | typ 0.000149 % | 5 |
| Total harmonic distortion + noise THD+N | G = 1, f = 1 kHz, POUT = 10 mW, RL = 32 Ω, 80-kHz measurement bandwidth | typ -116 dB | 5 |
| Total harmonic distortion + noise THD+N | G = 1, f = 1 kHz, POUT = 10 mW, RL = 16 Ω, 80-kHz measurement bandwidth | typ 0.000214 % | 5 |
| Total harmonic distortion + noise THD+N | G = 1, f = 1 kHz, POUT = 10 mW, RL = 16 Ω, 80-kHz measurement bandwidth | typ -113 dB | 5 |
| Intermodulation distortion IMD | SMPTE/DIN two-tone, 4:1 (60 Hz and 7 kHz), G = 1, VO = 3 VRMS, RL = 2 kΩ, 90-kHz measurement bandwidth | typ 0.000018 % | 5 |
| Intermodulation distortion IMD | SMPTE/DIN two-tone, 4:1 (60 Hz and 7 kHz), G = 1, VO = 3 VRMS, RL = 2 kΩ, 90-kHz measurement bandwidth | typ -135 dB | 5 |
| Intermodulation distortion IMD | CCIF twin-tone (19 kHz and 20 kHz), G = 1, VO = 3 VRMS, RL = 2 kΩ, 90-kHz measurement bandwidth | typ 0.00005 % | 5 |
| Intermodulation distortion IMD | CCIF twin-tone (19 kHz and 20 kHz), G = 1, VO = 3 VRMS, RL = 2 kΩ, 90-kHz measurement bandwidth | typ -126 dB | 5 |
| Gain-bandwidth product GBW | G = 1000 | typ 32 MHz | 5 |
| Gain-bandwidth product GBW | G = 1 | typ 8 MHz | 5 |
| Slew rate SR | G = –1 | typ 10 V/us | 5 |
| Full-power bandwidth | VO = 1 VP | typ 1.6 MHz | 5 |
| Overload recovery time | G = –10 | typ 300 ns | 5 |
| Channel separation (dual) | f = 1 kHz | typ 140 dB | 5 |
| Input voltage noise | f = 20 Hz to 20 kHz | typ 2.1 uVPP | 5 |
| Input voltage noise density en | f = 10 Hz; specified by design and characterization | typ 10 nV/√Hz | 5 |
| Input voltage noise density en | f = 100 Hz; specified by design and characterization | typ 4 nV/√Hz | 5 |
| Input voltage noise density en | f = 1 kHz; specified by design and characterization | typ 2.8 nV/√Hz | 5 |
| Input current noise density In | f = 10 Hz | typ 2.5 pA/√Hz | 5 |
| Input current noise density In | f = 1 kHz | typ 0.8 pA/√Hz | 5 |
| Input offset voltage VOS | TA = +25°C; bipolar values ±100 typical, ±500 maximum | typ 100 · max 500 uV | 5 |
| Input offset voltage VOS | TA = –40°C to +125°C; bipolar maximum ±600 | max 600 uV | 5 |
| Input offset voltage drift dVOS/dT | TA = –40°C to +125°C; specified by design and characterization | typ 0.5 · max 2.5 uV/°C | 5 |
| Power-supply rejection ratio PSRR | typ 0.1 · max 3 uV/V | 5 | |
| Input bias current IB | TA = +25°C | typ 1.2 · max 2 uA | 5 |
| Input bias current IB | TA = –40°C to +125°C; specified by design and characterization | max 2.2 uA | 5 |
| Input offset current IOS | TA = +25°C; bipolar values ±10 typical, ±50 maximum | typ 10 · max 50 nA | 5 |
| Input offset current IOS | TA = –40°C to +125°C; specified by design and characterization; bipolar maximum ±80 | max 80 nA | 5 |
| Common-mode rejection ratio CMRR | (V–) + 1.5 V ≤ VCM ≤ (V+) – 1 V, TA = –40°C to +125°C | min 110 · typ 127 dB | 5 |
| Open-loop voltage gain AOL | (V–) + 2 V ≤ VO ≤ (V+) – 2 V, RL = 32 Ω, VS = ± 5 V | min 114 · typ 120 dB | 6 |
| Open-loop voltage gain AOL | (V–) + 1.5 V ≤ VO ≤ (V+) – 1.5 V, RL = 600 Ω, VS = ± 18 V | min 120 · typ 136 dB | 6 |
| Voltage output swing from rail VO | Positive rail, no load | typ 800 mV | 6 |
| Voltage output swing from rail VO | Positive rail, RL = 600 Ω | typ 900 mV | 6 |
| Voltage output swing from rail VO | Negative rail, no load | typ 800 mV | 6 |
| Voltage output swing from rail VO | Negative rail, RL = 600 Ω | typ 900 mV | 6 |
| Logic high threshold VIH | TA = +25°C | typ 0.82 V | 6 |
| Logic high threshold VIH | TA = –40°C to +125°C | max 0.95 V | 6 |
| Logic low threshold VIL | TA = +25°C | typ 0.78 V | 6 |
| Logic low threshold VIL | TA = –40°C to +125°C | min 0.65 V | 6 |
| Input current IIH | VEN = 1.8 V | typ 1.5 uA | 6 |
| Quiescent current (per channel) IQ | VEN = 2.0 V, IOUT = 0 A, TA = +25°C | typ 2.6 · max 3.3 mA | 6 |
| Quiescent current (per channel) IQ | VEN = 2.0 V, IOUT = 0 A, TA = –40°C to +125°C | max 4.2 mA | 6 |
| Quiescent current (per channel) IQ | VEN = 0 V, IOUT = 0 A | typ 5 · max 10 uA | 6 |
Pins, by the datasheet
11- 1 +IN A
- Noninverting input, channel A. · p. 3
- 2 V+
- Positive (highest) power supply. · p. 3
- 3 GND
- Connect to ground. · p. 3
- 4 V–
- Negative (lowest) power supply. · p. 3
- 5 +IN B
- Noninverting input, channel B. · p. 3
- 6 –IN B
- Inverting input, channel B. · p. 3
- 7 OUT B
- Output, channel B. · p. 3
- 8 EN
- Shutdown (logic low), enable (logic high). · p. 3
- 9 OUT A
- Output, channel A. · p. 3
- 10 –IN A
- Inverting input, channel A. · p. 3
- Thermal pad Thermal pad
- Exposed underside thermal die pad; connect to V– and solder for specified performance and improved heat dissipation. · p. 3
Open-source boards using it
4- 4 layers300 × 270 mm

- 4 layers120 × 100 mm

DAC HPA 120x100 MACRO STUDY ONLY
ooyang0325/Hi-Res-DAC
Hi-Res DAC / headphone amplifier hardware (mirror of gitlab.com/ooyang0325/Hi-Res-DAC)
536 parts - 4 layers

MP3
william-richards1/MP3player
Board design + code for a raspberry pi based MP3 player, supporting both 3.5mm jack, and LDAC bluetooth encoding.
68 parts - 4 layers33.8 × 93.1 mm

Pumper
wolf-yuan-6115/lightwolf
Pumper is an experimental RP2354-based USB Audio Class 2 DAC. The board uses a PCM5102A DAC with OPA1652 and OPA1622 analog stages in a compact design intended for learning about USB audio and DAC hardware.
105 parts1GPL-3.0
Parts like it
1Questions
Is there a KiCad symbol and footprint for the OPA1622IDRCR?
Yes. The symbol is Amplifier_Audio:OPA1622 and the footprint Package_SON:Texas_S-PVSON-N10, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the OPA1622IDRCR?
VSON-10-EP(3x3), with 11 pins. Its footprint is drawn on this page.
Where is the OPA1622IDRCR datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the OPA1622IDRCR?
JLCPCB lists it as part C2876559, with 302 in stock; the sellers' links on this page open their listings.
What can replace the OPA1622IDRCR?
Parts like it in the library: the OPA1622IDRCT by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the OPA1622IDRCR?
4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.