
Multiplier
MikeZ7/Multiplier
Project of analog multiplier for AGH UST for Systems and Electronics Circuits subject

Hi-Res DAC / headphone amplifier hardware (mirror of gitlab.com/ooyang0325/Hi-Res-DAC)
DAC HPA 120x100 MACRO STUDY ONLY is an open-source printed circuit board by ooyang0325, from the ooyang0325/Hi-Res-DAC repository on GitHub. It is a 4-layer board of 120 × 100 mm with 536 parts on 246 nets, routed with 8 tracks and 4 vias.
It is built around the OPA1622IDRCR, TLV3402ID and AO3400A, with the MMBT3904, BAT54S and TLP3545A(F among its other parts. Its parts include 220 resistors, 144 capacitors, 21 transistors, 20 ICs and 17 diodes. It belongs with the audio and music boards of this library.
Sending this design for peer review? Begin with the layout handover report and REVIEWER_START_HERE.md, then use the schematic, placement, and command-line visual inspection guides. The findings template records actionable review results against one Git commit.
The functional-ECO placement baseline is a separate 120 × 100 mm review board made from explicit hand-selected coordinates. It includes the readback, J702 TVS and I/V A/B-channel schematic ECO, a tighter DAC bypass row and the local J702 TVS branches. The integrated audio study is the current routing review candidate; the newer DAC/core checkpoint records its latest clock, I²S and local power routes. The Freerouting probe rejects the whole-board result and documents two selectively adopted low-speed routes. Layout review and constraint disposition state the remaining route work. DAC_HPA.kicad_pcb and the prior macro study are historical comparisons; they predate the eight added parts.
Open DAC_HPA.kicad_pro or DAC_HPA.kicad_sch in KiCad 10. The root page links eight circuit sheets following Design Spec v1.1, Schematic Design Notes v1.0, Parts List v0.9, and Capture Update Note v1.0.
DAC_HPA_review_only.pdf is a nine-page visual export of the current provisional capture. The expanded protection sheet uses A1; smaller blocks use A2/A3/A4. Each sheet title block identifies v1.1-ECO1 and the open F01/F03/G-1–G-4 holds. The KiCad project is the editable source.
generate_schematic.py asserts the old workbook entry and applies this explicit override; IV_7MM_RECHECK.md records the provisional 7 mm input-route reassessment and sourcing/footprint limitations.pcbnew ratsnest links. Its manual record has 138 footprint moves, eight removed source-copper items and 828 added items. DACL/DACLB/DACR/DACRB no-via F.Cu routes measure 4.294/6.030/6.837/4.786 mm against the provisional 7 mm target, leaving DACR 0.163 mm. Saved L2 GND is directly below all four input traces at 0.01 mm route samples and offsets 0, ±0.05, ±0.10 mm. The longest I/V→first-T feed is 47.752 mm on the right; the largest projected 2D I/V feedback area is 4.875 mm², excluding vertical and return-current area. DACL's U403→C417 feedback branch still lacks direct L2 for 1.9426 mm of centreline (+0.0597 mm from the like-for-like committed baseline). Central VREF copper reaches 14.422 mm. Extract summing-node capacitance, the DACL feedback return, 3D loop geometry, right-side cross-layer coupling and VREF noise before I/V sign-off.5V_ANA_F feeder. Its B.Cu feeder now detours around F.Cu N5_FBP: projected track overlap 0.1663→0 mm² and unshielded pad-inclusive projection 0.0861→0 mm². The original via antipad remains; VIN3→C507 is 6.014 mm within its 6.1 mm bound. C510/C511 GND vias are 8.160/6.767 mm from U501's GND via by straight L2 via spacing, not an extracted return path. The board has zero exact or near-90° bends, zero footprint bbox overlaps, and zero classified JLC spacing findings. Full routing, system ESD, EMI/audio tests, measured R-15 and F01–F04/G-3/G-4 remain on HOLD. Courtyard gaps near C423/C426 are 0.150–0.194 mm; C437/J701/K602 and via mask also need JLC order DFM review.3D_MODEL_REVIEW.md distinguishes exact JLC/Toshiba sources from approximate oscillator and film-capacitor bodies. Open the current candidate in View → 3D Viewer.verify_critical_footprints.py checks 56 critical pad dimensions, pad types and hole/paste properties, including U202's exposed pad, the new TI DGK and onsemi SOT-23 lands, and J101/J701/J702 slots and locating holes. Physical G-3 overlays are still open.G3_CONNECTOR_OVERLAY_REVIEW_ONLY.svg and G3_PART_OVERLAY_REVIEW_ONLY.svg are printable A4 1:1 overlays for 30 unique footprint patterns, including U621 and the J702 TVS package; first measure each 10 mm reference bar. G3_OVERLAY_INDEX.md identifies the patterns and G3_OVERLAY_CHECKLIST.md holds editable physical sample results. The two-sample DMM and polarity templates are G1_G2_CONTINUITY_RECORD.md and G4_POLARITY_CHECKLIST.md.verify_design_notes.py checks 1,002 selected circuit and approved-correction assertions. SOURCE_RECONCILIATION.md and the ECO note record controlled changes from the source set.PRELAYOUT_GATES.md tracks the gate evidence and later G-5/G-6 holds. See CONNECTOR_REVIEW.md for connector maps and copper-ring decision, POLARITY_REVIEW.md for the D705/D706 correction, and CAD_models_to_upload.md for exact 3D models still desired.PCBA_PROCESS_REVIEW.md records the J101/J702 plated slots with no paste apertures and the exact JLCPCB process question to resolve before assembly release. The v1.1 calculation package's starting output-impedance estimates are 0.251 Ω (3.5 mm) and 0.383 Ω (4.4 mm), with 50 mΩ budgeted per output link. The candidate link's 1 mΩ maximum reduces that model term; routed copper and illustrative vias give the current conditional 4.4 mm estimates above. The 3.5 mm signal-only lower bounds are 0.2255/0.2188 Ω (L/R), with sleeve return unextracted. Both jacks still need measurement against R-15, and the 50 mΩ per jack-contact estimate has no maker maximum.The included JLCPCB library data came from LCSC codes through dsa-t/jlc-kicad-lib-loader 1.0.11. JLC_Source/JLC_DAC_HPA.elibz now keeps 42 source CAD entries, including exact C507231 for U621; JLC_Imported.pretty contains native KiCad footprints, and jlc_footprints.json records pad comparisons. The TI DCK example land and JLC C507231 land differ, so U621 remains a G-3 overlay item. The project footprints are in DAC_HPA.pretty; custom land sources are in FOOTPRINT_SOURCES.md.
With Python 3, openpyxl, and KiCad 10 installed:
python3 hardware/audit_jlc_library.py
python3 hardware/derive_connector_footprints.py
python3 hardware/generate_schematic.py
python3 hardware/verify_schematic.py
python3 hardware/verify_design_notes.py
python3 hardware/export_assembly_review.py
python3 hardware/check_attach_charge.py
python3 hardware/check_spi2_capture_contract.py
/Applications/KiCad/KiCad.app/Contents/Frameworks/Python.framework/Versions/Current/bin/python3 hardware/verify_critical_footprints.py
/Applications/KiCad/KiCad.app/Contents/Frameworks/Python.framework/Versions/Current/bin/python3 hardware/audit_placement.py hardware/DAC_HPA_120x100_FUNCTIONAL_ECO_STUDY_ONLY.kicad_pcb --height 100 > /tmp/dac-eco-placement.json
/Applications/KiCad/KiCad.app/Contents/Frameworks/Python.framework/Versions/Current/bin/python3 hardware/audit_dfa_dfm.py hardware/DAC_HPA_120x100_FUNCTIONAL_ECO_STUDY_ONLY.kicad_pcb > /tmp/dac-eco-dfa.json
/Applications/KiCad/KiCad.app/Contents/Frameworks/Python.framework/Versions/Current/bin/python3 hardware/audit_jlc_fab.py hardware/DAC_HPA_120x100_FUNCTIONAL_ECO_STUDY_ONLY.kicad_pcb > /tmp/dac-eco-fab.json
/Applications/KiCad/KiCad.app/Contents/MacOS/kicad-cli pcb drc --format json --severity-error --severity-warning -o /tmp/dac-eco-drc.json hardware/DAC_HPA_120x100_FUNCTIONAL_ECO_STUDY_ONLY.kicad_pcb
/Applications/KiCad/KiCad.app/Contents/Frameworks/Python.framework/Versions/Current/bin/python3 hardware/check_functional_eco_layout.py hardware/DAC_HPA_120x100_FUNCTIONAL_ECO_STUDY_ONLY.kicad_pcb /tmp/dac-eco-placement.json /tmp/dac-eco-dfa.json /tmp/dac-eco-fab.json /tmp/dac-eco-drc.json
/Applications/KiCad/KiCad.app/Contents/Frameworks/Python.framework/Versions/Current/bin/python3 hardware/audit_3d_models.py hardware/DAC_HPA_120x100_FUNCTIONAL_ECO_STUDY_ONLY.kicad_pcb
/Applications/KiCad/KiCad.app/Contents/MacOS/kicad-cli sch export pdf -o hardware/DAC_HPA_review_only.pdf hardware/DAC_HPA.kicad_schgenerate_schematic.py reads doc/DAC_HPA_Parts_List_v0.9.xlsx, asserts the source pin maps, applies the ECO and rewrites the generated sheets/symbol library. Run the CAD audits before regeneration when source data changes. Manual KiCad edits to generated schematic files are replaced on regeneration; edit the generator's asserted ECO or make a controlled new workbook revision. manual_functional_eco_layout.py records all additional hand-selected positions and local J702 tracks; its UUIDs may differ on reproduction, while check_functional_eco_layout.py checks the committed geometry and schematic pad map. manual_integrated_audio_study.py replays the frozen manifest of 138 footprint moves, eight source-copper removals and 828 added copper items; check_integrated_audio_study.py compares them with the review board. The command block above verifies the earlier functional-ECO baseline; the integrated CI job audits the current candidate. place_board.py --force is only for historical automatic comparisons.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 57 | 100 nF | Capacitor_SMD:C_0402_1005Metric | C104, C203, C204, C205, C206, C207, C208, C209, C210, C212, C213, C214, C215, C218, C219, C222 +41 |
| 52 | No part | DAC_HPA:TestPad_D1.0mm | TP701, TP702, TP703, TP704, TP705, TP706, TP707, TP708, TP709, TP710, TP711, TP712, TP713, TP714, TP715, TP716 +36 |
| 32 | 100 kΩ | Resistor_SMD:R_0402_1005Metric | R105, R108, R235, R240, R303, R505, R511, R512, R513, R535, R537, R538, R646, R647, R648, R653 +16 |
| 22 | 10 kΩ | Resistor_SMD:R_0402_1005Metric | R103, R104, R201, R202, R207, R208, R212, R213, R216, R217, R218, R227, R231, R232, R234, R236 +6 |
| 11 | 330 kΩ | Resistor_SMD:R_0402_1005Metric | R660, R690, R694, R916, R917, R918, R919, R926, R927, R928, R929 |
| 11 | AO3400A | JLC_Imported:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q207, Q502, Q503, Q504, Q505, Q506, Q616, Q617, Q619, Q620, Q622 |
| 10 | 1.00 MΩ | Resistor_SMD:R_0603_1608Metric | R678, R685, R901, R903, R905, R907, R909, R911, R913, R915 |
| 10 | 10 µF | Capacitor_SMD:C_0805_2012Metric | C413, C414, C415, C416, C507, C509, C510, C511, C512, C513 |
| 9 | 1 µF | Capacitor_SMD:C_0603_1608Metric | C220, C221, C311, C312, C441, C501, C506, C508, C617 |
| 9 | 33 Ω | Resistor_SMD:R_0402_1005Metric | R203, R204, R205, R206, R210, R211, R215, R224, R225 |
| 9 | 330 Ω | Resistor_SMD:R_0402_1005Metric | R228, R229, R230, R242, R243, R244, R245, R246, R665 |
| 8 | 1.00 MΩ | Resistor_SMD:R_0402_1005Metric | R666, R668, R930, R931, R932, R933, R938, R940 |
| 8 | 1.30 kΩ | Resistor_SMD:R_0603_1608Metric | R401, R403, R405, R407, R409, R411, R413, R415 |
| 8 | 1.8 nF | Capacitor_SMD:C_0603_1608Metric | C431, C432, C433, C434, C435, C436, C437, C438 |
| 8 | 10 pF | Capacitor_SMD:C_0603_1608Metric | C401, C402, C403, C404, C405, C406, C407, C408 |
| 8 | 100 nF | Capacitor_SMD:C_1206_3216Metric | C647, C648, C649, C650, C651, C652, C653, C654 |
| 8 | 2.00 kΩ | Resistor_SMD:R_0603_1608Metric | R402, R404, R406, R408, R410, R412, R414, R416 |
| 8 | 2.2 µF | Capacitor_SMD:C_0603_1608Metric | C301, C302, C303, C304, C310, C439, C440, C502 |
| 8 | 487 kΩ | Resistor_SMD:R_0603_1608Metric | R900, R902, R904, R906, R908, R910, R912, R914 |
| 8 | 5.1 kΩ | Resistor_SMD:R_0402_1005Metric | R101, R102, R628, R629, R630, R631, R639, R663 |
| 8 | 680 Ω | Resistor_SMD:R_0603_1608Metric | R438, R439, R440, R441, R442, R443, R444, R445 |
| 8 | 910 kΩ | Resistor_SMD:R_0402_1005Metric | R942, R943, R944, R945, R946, R947, R948, R949 |
| 8 | TLV3402 | JLC_Imported:VSSOP-8_L3.0-W3.0-P0.65-LS5.0-BL | U613, U614, U615, U616, U617, U618, U619, U620 |
| 7 | 470 kΩ | Resistor_SMD:R_0402_1005Metric | R109, R532, R688, R689, R935, R936, R937 |
| 7 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3, FID4, FID5, FID6, FID7 |
| 6 | 0 Ω | Resistor_SMD:R_0402_1005Metric | R107, R241, R417, R418, R419, R420 |
| 6 | 6.8 kΩ | Resistor_SMD:R_0402_1005Metric | R624, R625, R626, R627, R658, R661 |
| 6 | TLV1704 | JLC_Imported:TSSOP-14_L5.0-W4.4-P0.65-LS6.4-BL | U603, U606, U609, U610, U611, U612 |
| 5 | 1 nF | Capacitor_SMD:C_0402_1005Metric | C629, C639, C640, C641, C642 |
| 5 | 16.9 kΩ | Resistor_SMD:R_0402_1005Metric | R632, R633, R634, R635, R640 |
| 5 | 4.7 µF | Capacitor_SMD:C_0805_2012Metric | C608, C609, C610, C611, C616 |
| 5 | MMBT3904 | JLC_Imported:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | Q623, Q624, Q625, Q626, Q627 |
| 4 | 1 kΩ | Resistor_SMD:R_0402_1005Metric | R645, R692, R701, R703 |
| 4 | 10 nF | Capacitor_SMD:C_0402_1005Metric | C217, C514, C620, C621 |
| 4 | 110 kΩ | Resistor_SMD:R_0402_1005Metric | R920, R921, R922, R923 |
| 4 | 220 nF | DAC_HPA:C631_ECHU1H224GX9_D4 | C631, C632, C633, C634 |
| 4 | 3.3 nF | Capacitor_SMD:C_0603_1608Metric | C643, C644, C645, C646 |
| 4 | 5 V | JLC_Imported:SOD-523_L1.2-W0.8-LS1.6-BI | D701, D702, D703, D704 |
| 4 | 698 Ω | Resistor_SMD:R_0603_1608Metric | R423, R424, R425, R426 |
| 4 | 820 pF | Capacitor_SMD:C_0603_1608Metric | C417, C418, C419, C420 |
| 4 | BAT54S | JLC_Imported:SOT-23-3_L3.0-W1.7-P0.95-LS2.9-BR | D405, D406, D407, D408 |
| 4 | M3 plated to GND | DAC_HPA:MountingHole_M3_3.2mm_Pad6.0mm | MH1, MH2, MH3, MH4 |
| 4 | TLP3545A | DAC_HPA:K601_TLP3545A_LF1_HandSolder | K601, K602, K603, K604 |
| 3 | 10.0 kΩ | Resistor_SMD:R_0402_1005Metric | R657, R659, R670 |
| 3 | 100 pF | Capacitor_SMD:C_0402_1005Metric | C103, C516, C624 |
| 3 | 33 pF | Capacitor_SMD:C_0402_1005Metric | C201, C202, C421 |
| 3 | 4.7 kΩ | Resistor_SMD:R_0402_1005Metric | R237, R643, R644 |
| 3 | 600 Ω @ 100 MHz | Inductor_SMD:L_0603_1608Metric | FB202, FB301, FB302 |
| 3 | MMBT3904 | JLC_Imported:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q507, Q612, Q614 |
| 2 | 10 Ω | Resistor_SMD:R_0603_1608Metric | R527, R529 |
| 2 | 100 kΩ | Resistor_SMD:R_0603_1608Metric | R502, R504 |
| 2 | 2.2 kΩ | Resistor_SMD:R_0402_1005Metric | R674, R702 |
| 2 | 2.2 Ω | Resistor_SMD:R_0805_2012Metric | R301, R302 |
| 2 | 200 kΩ | Resistor_SMD:R_0402_1005Metric | R676, R683 |
| 2 | 22 MΩ | Resistor_SMD:R_0402_1005Metric | R679, R686 |
| 2 | 22 kΩ | Resistor_SMD:R_0402_1005Metric | R526, R528 |
| 2 | 220 µF | JLC_Imported:CASE-D_7343 | C442, C443 |
| 2 | 24.9 Ω | Resistor_SMD:R_0402_1005Metric | R641, R642 |
| 2 | 2N7002 | JLC_Imported:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q618, Q621 |
| 2 | 300 kΩ | Resistor_SMD:R_0603_1608Metric | R677, R684 |
| 2 | 44.2 kΩ | Resistor_SMD:R_0402_1005Metric | R675, R682 |
| 2 | 47 kΩ | Resistor_SMD:R_0402_1005Metric | R106, R536 |
| 2 | BAS70-04 | JLC_Imported:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | D609, D610 |
| 2 | BAT54 | JLC_Imported:SOT-23_L2.9-W1.3-P1.90-LS2.4-BR | D413, D414 |
| 2 | DNF (237 k … 2 M) | Resistor_SMD:R_0603_1608Metric | R446, R447 |
| 2 | Nexperia BAT54,215 | JLC_Imported:SOT-23_L2.9-W1.3-P1.90-LS2.4-BR | D104, D105 |
| 2 | OPA1622IDRCR | DAC_HPA:VSON-10_L3.0-W3.0-P0.50-BL-EP1.65_PAD | U401, U402 |
| 2 | OPA2210IDGKR | JLC_Imported:VSSOP-8_L3.0-W3.0-P0.65-LS5.0-BL | U403, U404 |
| 2 | PMEG2010AEH | JLC_Imported:SOD-123F_L2.8-W1.8-LS3.7-RD | D411, D412 |
| 1 | +3.85 / -3.72 V | DAC_HPA:WSON-12_L3.0-W2.0-P0.50-BL-EP_PAD | U501 |
| 1 | 1 Ω | Resistor_SMD:R_0603_1608Metric | R531 |
| 1 | 1.300 V (R533/R534) | JLC_Imported:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | U303 |
| 1 | 10.0 kΩ | Resistor_SMD:R_0603_1608Metric | R432 |
| 1 | 11.0 kΩ | Resistor_SMD:R_0603_1608Metric | R534 |
| 1 | 12 V | DAC_HPA:D102_SMDJ12A_HandSolder | D102 |
| 1 | 120 Ω @ 100 MHz | Inductor_SMD:L_0603_1608Metric | FB501 |
| 1 | 15.0 kΩ | Resistor_SMD:R_0603_1608Metric | R533 |
| 1 | 2.2 MΩ | Resistor_SMD:R_0402_1005Metric | R671 |
| 1 | 2.2 µF | Capacitor_SMD:C_0402_1005Metric | C211 |
| 1 | 2.2 µF | Capacitor_SMD:C_0805_2012Metric | C102 |
The 493 most common of 536 parts.

MikeZ7/Multiplier
Project of analog multiplier for AGH UST for Systems and Electronics Circuits subject

nguyencanhanh/luckfox-rv1103-drone
AI quadcopter on one RV1103 (Luckfox Pico Mini B): Linux + RISC-V MCU flight loop, SITL with 3D pilot view, KiCad flight-controller board


william-richards1/MP3player
Board design + code for a raspberry pi based MP3 player, supporting both 3.5mm jack, and LDAC bluetooth encoding.

wolf-yuan-6115/lightwolf
Pumper is an experimental RP2354-based USB Audio Class 2 DAC. The board uses a PCM5102A DAC with OPA1652 and OPA1622 analog stages in a compact design intended for learning about USB audio and DAC hardware.


kushurox/fiddlesticks_pcb
This project is open for learning purposes. Check the LICENSE file for details.

It measures 120 × 100 mm and has 4 copper layers, 1.6 mm thick.
536 parts, built around the OPA1622IDRCR, TLV3402ID, AO3400A and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ooyang0325/Hi-Res-DAC repository on GitHub, at the commit this page was made from: the board is hardware/DAC_HPA_120x100_MACRO_STUDY_ONLY.kicad_pcb and its schematic hardware/01_usb_input.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ooyang0325 before reusing the design.