Skip to the content
1234567

LP5912-1.2DRV

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 1.2V 12uVrms 250mV@(500mA) 500mA 55uA 6.5V 75dB@(1kHz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Operating status indication、Output discharge、Reverse-polarity current protection、Built-in soft-start Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LP5912-1.2DRV
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
WSON-6-EP(2x2)
Pins
6
In stock
210 at JLCPCB (C2876233)
Used on
2 open-source boards

Overview

The LP5912-1.2DRV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a WSON-6-EP(2x2) package with 7 pins. -40℃~+125℃@(Tj) 1 1.2V 12uVrms 250mV@(500mA) 500mA 55uA 6.5V 75dB@(1kHz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Operating status indication、Output discharge、Reverse-polarity current protection、Built-in soft-start Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:LP5912-1.2DRV, from KiCad's library) and its footprint (Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm, from KiCad's library), ready for a KiCad board. 210 are in stock at JLCPCB (part C2876233). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1OUT4EN5GND6IN3PG7EP
Regulator_Linear:LP5912-1.2DRVFrom KiCad's library

Footprint

1234567
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mmFrom KiCad's library

Pinout

7
The pins of the LP5912-1.2DRV
PinNameType
1OUTPower out
2NCNot connected
3PGOpen collector
4ENInput
5GNDPower in
6INPower in
7EPPassive

Open-source boards using it

2
  • 8 layers80 × 80 mmQsbc, the printed circuit board in 3D

    Qsbc

    qfreiman/qsbc

    Single Board Computer based on the i.MX8M Mini

    481 parts3GPL-3.0
  • 4 layersAL MAWJA, the printed circuit board in 3D

    AL MAWJA

    m0-hassan/AL-MAWJA

    KiCad mixed-signal I/Q analog front-end board — work in progress

    214 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LP5912-1.2DRV?

Yes. The symbol is Regulator_Linear:LP5912-1.2DRV and the footprint Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LP5912-1.2DRV?

WSON-6-EP(2x2), with 7 pins. Its footprint is drawn on this page.

Where is the LP5912-1.2DRV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LP5912-1.2DRV?

JLCPCB lists it as part C2876233, with 210 in stock; the sellers' links on this page open their listings.

What can replace the LP5912-1.2DRV?

Parts like it in the library: the TLV75512PDRV by Texas Instruments, the TLV75712PDRV by Texas Instruments, the AMS1117-1.2 by UMW and the AZ1117H-ADJTRG1 by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LP5912-1.2DRV?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.