Skip to the content
12345

LP2985-25DBV

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 150mA 16V 198mV@(150mA) 2.5V 30uVrms 750uA 78dB@(1kHz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Operating status indication、Output discharge、Built-in soft-start Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LP2985-25DBV
Category
Voltage Regulators Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
947 at JLCPCB (C2863838)
Used on
2 open-source boards

Overview

The LP2985-25DBV is a voltage Regulators Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 150mA 16V 198mV@(150mA) 2.5V 30uVrms 750uA 78dB@(1kHz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Operating status indication、Output discharge、Built-in soft-start Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LP2982AIM5X-3.0_NOPB, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 947 are in stock at JLCPCB (part C2863838). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

VIN1GND2ON/OFF#3BYPASS4VOUT5
EasyEDA_Cloud:LP2982AIM5X-3.0_NOPBFrom EasyEDA

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the LP2985-25DBV
PinNameType
1VINUnspecified
2GNDUnspecified
3ON/OFF#Unspecified
4BYPASSUnspecified
5VOUTUnspecified

Open-source boards using it

2
  • 2 layers100 × 100 mmExplorer, the printed circuit board in 3D

    Explorer

    anyshake/explorer

    🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.

    266 parts100
  • 4 layers44 × 64 mmJTAGProgrammer, the printed circuit board in 3D

    JTAGProgrammer

    anthony-bernaert/ftdi-jtag-programmer

    FTDI-based JTAG Programmer Circuit for FPGAs

    122 parts77CERN-OHL-P-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LP2985-25DBV?

Yes. The symbol is EasyEDA_Cloud:LP2982AIM5X-3.0_NOPB and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LP2985-25DBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the LP2985-25DBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LP2985-25DBV?

JLCPCB lists it as part C2863838, with 947 in stock; the sellers' links on this page open their listings.

What can replace the LP2985-25DBV?

Parts like it in the library: the LR8103B-T25 by LR, the ME6211C25M5G-N by MICRONE, the LP5907MFX-2.5 by Texas Instruments and the TPS72325DBV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LP2985-25DBV?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.