Skip to the content
12345678910111213141516

LMP91200MT

Texas InstrumentsExtended

-40℃~+125℃ 1 1.8V~5.5V Input buffering、ESD Protection TSSOP-16 Analog Front End (AFE) ROHS

Part id
ti/LMP91200MT
Category
Analog Front End (AFE)
Package
TSSOP-16
Pins
16
In stock
0 at JLCPCB (C2864135)
Used on
3 open-source boards

Overview

The LMP91200MT is an analog Front End made by Texas Instruments in a TSSOP-16 package with 16 pins. -40℃~+125℃ 1 1.8V~5.5V Input buffering、ESD Protection TSSOP-16 Analog Front End (AFE) ROHS.

PCBKit's library has its KiCad symbol (Analog & Interface:LMP91200, from CERN's library) and its footprint (Package_SO:TSSOP-16_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2864135). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

5INP9VREF4GUARD16GUARD22NC3NC1VDD14VDD12VOUT11VOCM7VCMHI8VCM10GND13GND15GND16GND
Analog & Interface:LMP91200From CERN's library

Footprint

12345678910111213141516
Package_SO:TSSOP-16_4.4x5mm_P0.65mmFrom KiCad's library

Pinout

16
The pins of the LMP91200MT
PinNameType
1VDDPower in
2NCPassive
3NCPassive
4GUARD1Input
5INPInput
6GUARD2Input
7VCMHIOutput
8VCMOutput
9VREFInput
10GNDPower in
11VOCMOutput
12VOUTOutput
13GNDPower in
14VDDPower in
15GNDPower in
16GNDPower in

Open-source boards using it

3
  • 4 layers85 × 56 mmDwc hat, the printed circuit board in 3D

    Dwc hat

    dwcguru1/dwc-hat

    Raspberry Pi Monitor for Deep-Water-Cultures (DWC)

    100 parts4MIT
  • 2 layers50 × 35 mmSoil pH AFE, the printed circuit board in 3D

    Soil pH AFE

    xmyoot/guarded-ph-acquisition-module

    Guarded pH analog front end: KiCad design, fabrication files, ESP32-S3 bring-up firmware and engineering review. Unbuilt prototype.

    44 parts
  • 4 layers42 × 85 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hardware-design-lab

    Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack

    26 parts

Parts like it

3

Questions

Is there a KiCad symbol and footprint for the LMP91200MT?

Yes. The symbol is Analog & Interface:LMP91200 and the footprint Package_SO:TSSOP-16_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LMP91200MT?

TSSOP-16, with 16 pins. Its footprint is drawn on this page.

Where is the LMP91200MT datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LMP91200MT?

JLCPCB lists it as part C2864135, with 0 in stock; the sellers' links on this page open their listings.

What can replace the LMP91200MT?

Parts like it in the library: the AD7793BRUZ-MS by MSKSEMI, the LDC5072EPWRQ1 by Texas Instruments and the LDC5071EPWRQ1 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LMP91200MT?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.