Skip to the content
12345678

LMK1C1102PW

Texas InstrumentsExtended

-40℃~+125℃ 1 1.71V~1.89V、2.375V~2.625V、3.135V~3.465V 2 250MHz TSSOP-8 Clock Buffers, Drivers, Distributors ROHS

Part id
ti/LMK1C1102PW
Category
Clock Buffers, Drivers, Distributors
Package
TSSOP-8
Pins
8
In stock
6,133 at JLCPCB (C2859546)
Used on
2 open-source boards

Overview

The LMK1C1102PW is a clock Buffers, Drivers, Distributor made by Texas Instruments in a TSSOP-8 package with 8 pins. -40℃~+125℃ 1 1.71V~1.89V、2.375V~2.625V、3.135V~3.465V 2 250MHz TSSOP-8 Clock Buffers, Drivers, Distributors ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:5PB1102CMGI, from EasyEDA) and its footprint (Package_SO:TSSOP-8_4.4x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. 6,133 are in stock at JLCPCB (part C2859546). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1CLKIN21G3Y04GND5NC6VDD7NC8Y1
EasyEDA_Cloud:5PB1102CMGIFrom EasyEDA

Footprint

12345678
Package_SO:TSSOP-8_4.4x3mm_P0.65mmFrom KiCad's library

From the datasheet

19
Supply, least
3.135 V · VDD, recommended operating min, 3.3-V supply · p. 5
Supply, most
3.465 V · VDD, recommended operating max, 3.3-V supply · p. 5
Supply, least
2.375 V · VDD, recommended operating min, 2.5-V supply · p. 5
Supply, most
2.625 V · VDD, recommended operating max, 2.5-V supply · p. 5
Supply, least
1.71 V · VDD, recommended operating min, 1.8-V supply · p. 5
Supply, most
1.89 V · VDD, recommended operating max, 1.8-V supply · p. 5
Works from
-40 °C · Operating free-air temperature min · p. 5
Works up to
125 °C · Operating free-air temperature max · p. 5
Junction, hottest
150 °C · Operating junction temperature max · p. 5
A pin gives at most
50 mA · Continuous output current absolute max, magnitude · p. 5
Takes working
14 mA · VDD typical, all outputs active, 100 MHz, CL = 5 pF, VDD = 1.8 V · p. 6
Takes working
21 mA · VDD typical, all outputs active, 100 MHz, CL = 5 pF, VDD = 2.5 V · p. 6
Takes working
33 mA · VDD typical, all outputs active, 100 MHz, CL = 5 pF, VDD = 3.3 V · p. 6
Takes at most
40 mA · VDD max, all outputs active, 100 MHz, CL = 5 pF, VDD = 3.3 V · p. 6
Takes asleep
25 µA · VDD typical static, all outputs disabled, fIN = 0 V · p. 6
Takes asleep
8 mA · VDD typical, all outputs disabled, fIN = 100 MHz · p. 6
Edge
350 ps · Output rise and fall time typical, VDD = 3.3 V, 20/80%, CL = 5 pF, 156.25 MHz · p. 6
Edge
330 ps · Output rise and fall time typical, VDD = 2.5 V, 20/80%, CL = 5 pF, 156.25 MHz · p. 6
Edge
380 ps · Output rise and fall time typical, VDD = 1.8 V, 20/80%, CL = 5 pF, 156.25 MHz · p. 7

What it is and has

10
Output skew
< 50 ps · p. 1
Additive jitter
< 50 fs maximum · p. 1
Propagation delay
< 3 ns · p. 1
Output enable
Synchronous · p. 1
Supply voltage
3.3 V, 2.5 V, or 1.8 V · p. 1
Input tolerance
3.3-V tolerant at all supply voltages · p. 1
Fail-safe inputs
Supported · p. 1
Maximum clock frequency
250 MHz at 3.3 V · p. 1
Maximum clock frequency
200 MHz at 2.5 V and 1.8 V · p. 1
Package
8-pin TSSOP · p. 1

Around it

2
cap 0.1 µF
between VDD and GND; One bypass capacitor per supply terminal; low ESR, very close to supply terminal, connected directly to ground plane with short loops. · p. 13
ferrite Not specified
between Board supply and Chip supply; Recommended but not required; choose very low DC resistance to isolate high-frequency switching noise. · p. 13

Specifications

53
ParameterConditionsAs printedPage
Supply voltage VDDOver operating free-air temperature range; shared voltage limits with CLKIN and 1Gmin -0.5 · max 3.6 V5
Input voltage (CLKIN) VCLKINOver operating free-air temperature rangemin -0.5 · max 3.6 V5
Input voltage (1G) VINOver operating free-air temperature range; shared voltage limits with VDD and CLKINmin -0.5 · max 3.6 V5
Output pins (Yn) VYnMaximum is VDD + 0.3 Vmin -0.5 V5
Input current IINOver operating free-air temperature rangemin -20 · max 20 mA5
Continuous output current IOOver operating free-air temperature rangemin -50 · max 50 mA5
Storage temperature Tstgmin -65 · max 150 °C5
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; value ±9000 Vmax 9000 V5
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pins; value ±1500 Vmax 1500 V5
Core supply voltage VDD3.3-V supply; typ field contains NOMmin 3.135 · typ 3.3 · max 3.465 V5
Core supply voltage VDD2.5-V supply; typ field contains NOMmin 2.375 · typ 2.5 · max 2.625 V5
Core supply voltage VDD1.8-V supply; typ field contains NOMmin 1.71 · typ 1.8 · max 1.89 V5
Operating free-air temperature TAmin -40 · max 125 °C5
Operating junction temperature TJmin -40 · max 150 °C5
Core supply current, static IDDAll-outputs disabled, fIN = 0 V; VDD = 3.3 V ± 5%; typical at 25°Ctyp 25 · max 45 uA6
Core supply current IDDAll-outputs disabled, fIN = 100 MHz; VDD = 3.3 V ± 5%; typical at 25°Ctyp 8 · max 15 mA6
Core supply current IDDAll-outputs active, fIN = 100 MHz, CL = 5pF, VDD = 1.8 Vtyp 14 · max 20 mA6
Core supply current IDDAll-outputs active, fIN = 100 MHz, CL = 5pF, VDD = 2.5 Vtyp 21 · max 30 mA6
Core supply current IDDAll-outputs active, fIN = 100 MHz, CL = 5pF, VDD = 3.3 Vtyp 33 · max 40 mA6
Input frequency fIN_SEVDD = 3.3 V; minimum DCmax 250 MHz6
Input frequency fIN_SEVDD = 2.5 V and 1.8 V; minimum DCmax 200 MHz6
Input slew rate dVIN/dt20% - 80% of input swingmin 0.1 V/ns6
Input leakage current IIN_LEAKCLOCK INPUTmin -50 · max 50 uA6
Input capacitance CIN_SEat 25°Ctyp 7 pF6
Output frequency fOUTVDD = 3.3 Vmax 250 MHz6
Output frequency fOUTVDD = 2.5 V and 1.8 Vmax 200 MHz6
Output duty cycle ODCWith 50% duty cycle input (for all VDD)min 45 · max 55 %6
Start-up time before output is active tSTARTMeasured from VDD stable to output active, when 1G = HIGHmax 3 ms6
Output enable time t1G_ONMeasured from 1G rising edge crossing VIH to first rising edge of Ynmax 5 cycles6
Output disable time t1G_OFFMeasured from 1G falling edge crossing VIL to last falling edge of Ynmax 5 cycles6
Output high voltage VOHVDD = 3.3 V ± 5%; IOH = 1 mAmin 2.8 V6
Output low voltage VOLVDD = 3.3 V ± 5%; IOL = 1 mAmax 0.2 V6
Output rise and fall time tRISE-FALLVDD = 3.3 V ± 5%; 20/80%, CL= 5 pF, fIN = 156.25 MHztyp 0.35 · max 0.7 ns6
Output-output skew tOUTPUT-SKEWVDD = 3.3 V ± 5%; measured from rising edge of any Yn output to any other Ym outputtyp 25 · max 50 ps6
Part-to-part skew tPART-SKEWVDD = 3.3 V ± 5%max 250 ps6
Propagation delay tPROP-DELAYVDD = 3.3 V ± 5%; measured from rising edge of CLKIN to any Yn outputtyp 1.5 · max 2 ns6
Additive Jitter tJITTER-ADDVDD = 3.3 V ± 5%; fIN = 156.25 MHz, Input slew rate = 2 V/ns, Integration range = 12 kHz - 20 MHztyp 8 · max 20 fs, RMS6
Output impedance ROUTVDD = 3.3 V ± 5%typ 50 Ω6
Output rise and fall time tRISE-FALLVDD = 2.5 V ± 5%; 20/80%, CL= 5 pF, fIN = 156.25 MHztyp 0.33 · max 0.8 ns6
Output-output skew tOUTPUT-SKEWVDD = 2.5 V ± 5%; measured from rising edge of any Yn output to any other Ym outputmax 50 ps6
Part-to-part skew tPART-SKEWVDD = 2.5 V ± 5%max 400 ps6
Propagation delay tPROP-DELAYVDD = 2.5 V ± 5%; measured from rising edge of CLKIN to any Yn outputtyp 1.5 · max 2.5 ns6
Additive Jitter tJITTER-ADDVDD = 2.5 V ± 5%; fIN = 156.25 MHz, Input slew rate = 2 V/ns, Integration range = 12 kHz - 20 MHztyp 11 · max 27 fs, RMS6
Output impedance ROUTVDD = 2.5 V ± 5%typ 52.5 Ω6
Output rise and fall time tRISE-FALLVDD = 1.8 V ± 5%; 20/80%, CL= 5 pF, fIN = 156.25 MHztyp 0.38 · max 1 ns7
Output-output skew tOUTPUT-SKEWVDD = 1.8 V ± 5%; measured from rising edge of any Yn output to any other Ym outputmax 50 ps7
Part-to-part skew tPART-SKEWVDD = 1.8 V ± 5%max 900 ps7
Propagation delay tPROP-DELAYVDD = 1.8 V ± 5%; measured from rising edge of CLKIN to any Yn outputtyp 1.5 · max 3 ns7
Additive Jitter tJITTER-ADDVDD = 1.8 V ± 5%; fIN = 156.25 MHz, Input slew rate = 2 V/ns, Integration range = 12 kHz - 20 MHztyp 17.5 · max 50 fs, RMS7
Output impedance ROUTVDD = 1.8 V ± 5%typ 60 Ω7
Input high-level current IIHGENERAL PURPOSE INPUT (1G); VIH = VDD_REFmin -50 · max 50 uA7
Input low-level current IILGENERAL PURPOSE INPUT (1G); VIL = GNDmin -50 · max 50 uA7
VDD ramp rate V/tRAMPVDD = 3.3 V ± 5 %, –40°C ≤ TA ≤ 125°Cmin 0.1 · max 50 V/ms7

Open-source boards using it

2
  • 4 layers90 × 90 mmCLOCK, the printed circuit board in 3D

    CLOCK

    Han-ZenX/CLOCK

    High-precision frequency meter clock generation module

    162 parts1
  • 4 layers100 × 100 mmMic test pcb, the printed circuit board in 3D

    Mic test pcb

    jbrryhooves/sound-compass

    359 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LMK1C1102PW?

Yes. The symbol is EasyEDA_Cloud:5PB1102CMGI and the footprint Package_SO:TSSOP-8_4.4x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LMK1C1102PW?

TSSOP-8, with 8 pins. Its footprint is drawn on this page.

Where is the LMK1C1102PW datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LMK1C1102PW?

JLCPCB lists it as part C2859546, with 6,133 in stock; the sellers' links on this page open their listings.

What can replace the LMK1C1102PW?

Parts like it in the library: the CDCLVC1102PW by Texas Instruments, the CDCLVC1104PW by Texas Instruments, the CDCV304PW by Texas Instruments and the PI6CV304LEX by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LMK1C1102PW?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.