Skip to the content
29

LM5175RHFR

Texas InstrumentsExtended

-40℃~+125℃@(TJ) 1 100kHz~600kHz 3.5V~42V 800mV~55V Adjustable Buck-Boost Buck-Boost External Yes QFN-28-EP(4x5) DC-DC Converters ROHS

Part id
ti/LM5175RHFR
Category
DC DC Controllers
Package
QFN-28-EP(4x5)
Pins
28
In stock
2,831 at JLCPCB (C132204)
Used on
1 open-source board

Overview

The LM5175RHFR is a DC DC Controller made by Texas Instruments in a QFN-28-EP(4x5) package with 29 pins. -40℃~+125℃@(TJ) 1 100kHz~600kHz 3.5V~42V 800mV~55V Adjustable Buck-Boost Buck-Boost External Yes QFN-28-EP(4x5) DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:LM5175RHF, from KiCad's library) and its footprint (Package_DFN_QFN:VQFN-28-1EP_4x5mm_P0.5mm_EP2.55x3.55mm, from KiCad's library), ready for a KiCad board. 2,831 are in stock at JLCPCB (part C132204). 1 open-source board in 1 repository on GitHub use it.

Symbol

1MODE2DITH3RT/SYNC4SLOPE5SS6COMP7AGND8FB9VOSNS10ISNS(-)11ISNS(+)12CSG13CS14PGOOD15SW216HDRV217BOOT218LDRV219PGND20VCC21BIAS22LDRV123BOOT124HDRV125SW126EN/UVLO27VIN28VISNS29PowerPAD
Regulator_Switching:LM5175RHFFrom KiCad's library

Footprint

29
Package_DFN_QFN:VQFN-28-1EP_4x5mm_P0.5mm_EP2.55x3.55mmFrom KiCad's library

Pinout

29
The pins of the LM5175RHFR
PinNameType
1MODEInput
2DITHPassive
3RT/SYNCInput
4SLOPEPassive
5SSPassive
6COMPPassive
7AGNDPower in
8FBInput
9VOSNSOutput
10ISNS(-)Input
11ISNS(+)Input
12CSGInput
13CSInput
14PGOODOutput
15SW2Output
16HDRV2Output
17BOOT2Passive
18LDRV2Output
19PGNDPower in
20VCCPower in
21BIASInput
22LDRV1Output
23BOOT1Passive
24HDRV1Output
25SW1Output
26EN/UVLOInput
27VINPower in
28VISNSInput
29PowerPADInput

Open-source boards using it

1
  • 2 layers149.6 × 65 mmSolar, the printed circuit board in 3D

    Solar

    DinosaurPotato534/Project-Albatross

    birb

    201 parts

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the LM5175RHFR?

Yes. The symbol is Regulator_Switching:LM5175RHF and the footprint Package_DFN_QFN:VQFN-28-1EP_4x5mm_P0.5mm_EP2.55x3.55mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM5175RHFR?

QFN-28-EP(4x5), with 29 pins. Its footprint is drawn on this page.

Where is the LM5175RHFR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM5175RHFR?

JLCPCB lists it as part C132204, with 2,831 in stock; the sellers' links on this page open their listings.

What can replace the LM5175RHFR?

Parts like it in the library: the LM5176RHFR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM5175RHFR?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.