4 layers62.2 × 129.9 mm
Vesc
LJBoxx/Baguette-esc
ESC (electronic speed controller) based on VESC6 schematic
196 parts5CERN-OHL-S-2.0
LM5168FDDA
Texas InstrumentsExtended
-40℃~+150℃@(TJ) 1 1.2V~120V 1MHz 300mA 6V~120V Adjustable Buck、Buck-Boost Buck、Flyback Built-in Yes SOPowerPAD-8 DC-DC Converters ROHS
- Part id
- ti/LM5168FDDA
- Category
- DC DC Converters
- Package
- SOPowerPAD-8
- Pins
- 9
- In stock
- 0 at JLCPCB (C3192338)
- Used on
- 2 open-source boards
Overview
The LM5168FDDA is a DC DC Converter made by Texas Instruments in a SOPowerPAD-8 package with 9 pins. -40℃~+150℃@(TJ) 1 1.2V~120V 1MHz 300mA 6V~120V Adjustable Buck、Buck-Boost Buck、Flyback Built-in Yes SOPowerPAD-8 DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LM5169PDDAR, from EasyEDA) and its footprint (EasyEDA_Cloud:SO-8_L4.9-W3.9-P1.27-LS6.0-BL-EP, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C3192338). 2 open-source boards in 1 repository on GitHub use it.
Symbol
Footprint
Pinout
9| Pin | Name | Type |
|---|---|---|
| 1 | GND | Unspecified |
| 2 | VIN | Unspecified |
| 3 | EN/UVLO | Unspecified |
| 4 | RT | Unspecified |
| 5 | FB | Unspecified |
| 6 | PGOOD | Unspecified |
| 7 | BST | Unspecified |
| 8 | SW | Unspecified |
| 9 | EP | Unspecified |
Open-source boards using it
2- 4 layers60.5 × 60.7 mm
Logic
LJBoxx/Baguette-esc
ESC (electronic speed controller) based on VESC6 schematic
151 parts5CERN-OHL-S-2.0
Parts like it
8
AP64352SP
SO-8-EP-40℃~+85℃ 1 100kHz~2.2MHz 22uA 3.5A 3.8V~40V 800mV~39V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Adjustable soft-start、Cycle-by-cycle current limiting、Frequency synchronization、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes SO-8-EP DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersLMR23610ADDA
SO-8-EP-40℃~+125℃@(TJ) 1 1A 1V~28V 400kHz 4V~36V 75uA Adjustable Buck Buck Built-in Yes SO-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLMR36520ADDAR
SOPowerPAD-8-40℃~+125℃@(TJ) 1 1V~28V 2A 4.2V~65V 400kHz Adjustable Buck Buck Built-in Yes SOPowerPAD-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLMR36520FADDA
SO-8-40℃~+125℃@(TJ) 1 1V~28V 2A 4.2V~65V 400kHz Adjustable Buck Buck Built-in Yes SO-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS54627DDAR
SO-8-EP-40℃~+85℃@(TA) 1 1.4mA 4.5V~18V 650kHz 6A 765mV~5.5V Adjustable Buck Buck Built-in Yes SO-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLM5018MRX
SO-8-EP-40℃~+125℃@(TJ) 1 1.225V~90V 1MHz 300mA 7.5V~100V Adjustable Buck Buck Built-in Yes SO-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersAP64500SP
SO-8-EP-40℃~+85℃ 1 100kHz~2.2MHz 25uA 3.8V~40V 5A 800mV~39V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Frequency synchronization、Hiccup current limiting、External compensation、EMI optimization (spread spectrum) Step-down type Yes SO-8-EP DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersLM5164QDDARQ1
SO-8-40℃~+150℃@(TJ) 1 10.5uA 1A 1MHz 6V~100V Adjustable Buck Buck Built-in Yes SO-8 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
Questions
Is there a KiCad symbol and footprint for the LM5168FDDA?
Yes. The symbol is EasyEDA_Cloud:LM5169PDDAR and the footprint EasyEDA_Cloud:SO-8_L4.9-W3.9-P1.27-LS6.0-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LM5168FDDA?
SOPowerPAD-8, with 9 pins. Its footprint is drawn on this page.
Where is the LM5168FDDA datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the LM5168FDDA?
JLCPCB lists it as part C3192338, with 0 in stock; the sellers' links on this page open their listings.
What can replace the LM5168FDDA?
Parts like it in the library: the AP64352SP by Diodes Incorporated, the LMR23610ADDA by Texas Instruments, the LMR36520ADDAR by Texas Instruments and the LMR36520FADDA by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the LM5168FDDA?
2 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.