Skip to the content
4 layers62.2 × 129.9 mmVesc, the printed circuit board in 3D

ESC (electronic speed controller) based on VESC6 schematic

Size
62.2 × 129.9 mm
Copper layers
4
Thickness
1.6 mm
Parts
196
Nets
135
Pads
966
Tracks, vias
1,153, 395
Pours
43
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
21 Apr 2025
Updated
15 May 2025

Overview

Vesc is an open-source printed circuit board by LJBoxx, from the LJBoxx/Baguette-esc repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 4-layer board of 62.2 × 129.9 mm with 196 parts on 135 nets, routed with 1,153 tracks and 395 vias.

It is built around the MCP2551-I/SN-HG, LM5168FDDA and TPS62172DSG, with the TPS62173DSG, SRV05-4 and BMI160 among its other parts. Its parts include 88 capacitors, 48 resistors, 21 connectors, 20 ICs and 9 diodes. It belongs with the robots and motor control boards and the STM32 boards of this library.

Main components

8

README

README.md

Baguette-ESC – Experimental Compact ESC Based on VESC

BaguetteESC is an open-source, compact Electronic Speed Controller (ESC) inspired by the VESC platform. It is designed to push boundaries in high-voltage motor control and explore innovative hardware concepts.
⚠️ Please note: this project is in a very early stage and has not yet been tested. Use at your own risk.


❗ Liability Warning

⚠️ THIS PROJECT IS PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED WARRANTY. I AM NOT RESPONSIBLE FOR ANY DAMAGE TO PERSONS, PROPERTY, OR EQUIPMENT RESULTING FROM THE USE, MISUSE, OR MALFUNCTION OF THIS HARDWARE OR SOFTWARE.

BY USING ANY PART OF THIS PROJECT, YOU AGREE TO ASSUME ALL RISK AND LIABILITY.


🚧 Project Status: Experimental & Untested

This ESC design has not been tested in hardware yet. Schematics, PCB layouts, and component choices are experimental and may contain errors.
Do not use this design in safety-critical or commercial applications. Community feedback and contributions are welcome to bring it closer to working prototype status.


🔧 Key Features

  • 120V Toll MOSFETs – For exploring high-voltage BLDC control
  • Compact Dual-Board Aluminum PCB Powerstage – Designed for heat dissipation in a minimal footprint
  • Phase Filters – Included to reduce switching noise and improve signal integrity
  • BMI160 IMU – Onboard sensor for potential inertial feedback and experimentation
  • Expansion Port for Bluetooth Module – Optional wireless connectivity for future development

Motor Controller


📁 Repository Structure

  • /hardware – Schematics, PCB layout (KiCad), BOM, and Gerbers
  • /firmware – Configuration files for VESC firmware compatibility (WIP)
  • /docs – Additional notes, board assembly info, and future test logs

🧪 Goals

  • Explore high-voltage ESC design with open documentation
  • Keep the design compact while pushing thermal and electrical limits
  • Provide a foundation for collaborative experimentation and learning

📥 Getting Started

  1. Clone the Repository

    bash
    git clone https://github.com/LJBoxx/Baguette-esc.git
    cd Baguette-esc
  2. Review the Design Files

    • Hardware located in /hardware
    • Firmware is not yet customized; expected to work with stock VESC firmware (further testing required)
  3. ⚠️ Warning Before Building

    • This design is completely untested Electrical, thermal, and functional characteristics are unverified
    • Proceed only if you're comfortable debugging hardware issues

📜 License

This project is licensed under the CERN Open Hardware Licence Version 2 - Strongly Reciprocal (CERN-OHL-S).

If you distribute modified versions or hardware based on this project, you must also share your changes under the same license.

See the LICENSE file for full legal text.


🙏 Acknowledgements

Special thanks to Benjamin Vedder and the entire VESC community for laying the foundation for open-source motor control.


🤝 Contributing

Contributions, reviews, and test results are very welcome. Open an issue or submit a pull request to help move the project forward.


⚡ Hack carefully. Test responsibly. Share openly.

Parts

196
QtyValueFootprintReferences
17100nCapacitor_SMD:C_0402_1005MetricC5, C6, C7, C8, C19, C20, C21, C22, C23, C24, C52, C57, C74, C90, C92, C100 +1
16CCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC31, C33, C34, C35, C36, C37, C38, C39, C76, C77, C78, C79, C80, C81, C82, C83
91kResistor_SMD:R_0603_1608MetricR9, R10, R11, R12, R16, R17, R18, R19, R20
82.2uCapacitor_SMD:C_0603_1608MetricC12, C13, C14, C15, C101, C102, C103, C104
7100nCapacitor_SMD:C_0603_1608MetricC9, C94, C95, C96, C97, C98, C99
74.7uCapacitor_SMD:C_0805_2012MetricC54, C55, C56, C58, C59, C89, C91
61N4148WDiode_SMD:D_SOD-123D7, D13, D18, D19, D20, D21
61nCapacitor_SMD:C_0603_1608MetricC2, C3, C4, C15n1, C15n2, C15n3
62rResistor_SMD:R_0603_1608MetricR49, R65, R70, R71, R72, R73
6MC74VHC1GT66Package_TO_SOT_SMD:SOT-353_SC-70-5U10, U11, U12, U16, U17, U18
6NCEP028N12LLtoooool:Infineon_PG-HSOF-8-1Q5, Q7, Q9, Q11, Q13, Q15
510kResistor_SMD:R_0603_1608MetricR6, R40, R41, R42, R64
4100KResistor_SMD:R_1206_3216MetricR43, R44, R45, R55
42.2kResistor_SMD:R_0603_1608MetricR46, R47, R48, R56
42.2uCapacitor_SMD:C_0805_2012MetricC65, C66, C75, C87
310k_NTCResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR37, R38, R39
315nCapacitor_SMD:C_0603_1608MetricC16, C17, C18
31uCapacitor_SMD:C_1206_3216MetricC61, C62, C63
32.2ufCapacitor_SMD:C_0603_1608MetricC49, C50, C51
32k2Resistor_SMD:R_0603_1608MetricR3, R4, R5
3Conn_01x02_SocketConnector_PinSocket_2.00mm:PinSocket_2x02_P2.00mm_Vertical_SMDJ17, J20, J22
3Conn_01x03_SocketConnector_PinSocket_2.00mm:PinSocket_2x02_P2.00mm_Vertical_SMDJ4, J7, J11
3LEDLED_SMD:LED_0603_1608MetricD1, D2, D3
3rtoooool:5930-resR13, R14, R15
3~Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mmU13, U14, U15
3~Package_TO_SOT_SMD:SOT-23-8U3, U4, U5
2100kResistor_SMD:R_0603_1608MetricR61, R62
210uFCapacitor_SMD:C_0805_2012MetricC70, C73
210uFCapacitor_SMD:C_0603_1608MetricC68, C71
210uHInductor_SMD:L_Ferrocore_DLG-0403L2, L3
215pCapacitor_SMD:C_0402_1005MetricC10, C11
2220Resistor_SMD:R_0603_1608MetricR7, R8
222uFCapacitor_SMD:C_0805_2012MetricC69, C72
25k1Resistor_SMD:R_0603_1608MetricR1, R2
2Conn_01x02_PinConnector_PinSocket_2.00mm:PinSocket_2x02_P2.00mm_Vertical_SMDJ19, J21
2Conn_01x02_PinConnector_JST:JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_VerticalJ1, J14
2Conn_01x03_PinConnector_PinSocket_2.00mm:PinSocket_2x02_P2.00mm_Vertical_SMDJ5, J8
2SRV05-4Package_TO_SOT_SMD:SOT-23-6U1, U19
11.2nCapacitor_SMD:C_0402_1005MetricC64
1100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC53
1120ohmResistor_SMD:R_0603_1608MetricR63
11nCapacitor_SMD:C_0402_1005MetricC1
12.2nCapacitor_SMD:C_0603_1608MetricC60
1220uhInductor_SMD:L_SXN_SMDRI127L1
122uCapacitor_SMD:C_0805_2012MetricC88
1357kResistor_SMD:R_0805_2012MetricR58
1453kResistor_SMD:R_0603_1608MetricR57
147pCapacitor_SMD:C_0603_1608MetricC67
150kResistor_SMD:R_0603_1608MetricR60
159kResistor_SMD:R_0603_1608MetricR59
18mCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1BMI160Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mmU20
1Conn_01x02_PinConnector_JST:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_VerticalJ24
1Conn_01x03_PinButton_Switch_SMD:SW_SPDT_PCM12J3
1Conn_01x04_PinConnector_JST:JST_GH_BM05B-GHS-TBT_1x05-1MP_P1.25mm_VerticalJ16
1Conn_01x04_PinConnector_PinSocket_2.00mm:PinSocket_2x02_P2.00mm_Vertical_SMDJ18
1Conn_01x06_PinConnector_PinHeader_1.27mm:PinHeader_1x06_P1.27mm_VerticalJ23
1Conn_01x06_PinConnector_JST:JST_GH_BM06B-GHS-TBT_1x06-1MP_P1.25mm_VerticalJ10
1Conn_01x08_PinConnector_JST:JST_GH_BM08B-GHS-TBT_1x08-1MP_P1.25mm_VerticalJ15
1Conn_01x0_PinConnector_PinSocket_2.00mm:PinSocket_2x02_P2.00mm_Vertical_SMDJ12
1LM5168FPackage_SO:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mmU6
1MCP2551-I-SNPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU9
1STM32F405RGTxPackage_QFP:LQFP-64_10x10mm_P0.5mmU2
1TPS62172DSGPackage_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mmU8
1TPS62173DSGPackage_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mmU7
1USB_C_Receptacle_USB2.0Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7051xJ2

More from LJBoxx/Baguette-esc

2
  • 4 layers60.5 × 60.7 mmLogic, the printed circuit board in 3D

    Logic

    LJBoxx/Baguette-esc

    ESC (electronic speed controller) based on VESC6 schematic

    151 parts5CERN-OHL-S-2.0
  • 4 layers62.1 × 61.4 mmPower, the printed circuit board in 3D

    Power

    LJBoxx/Baguette-esc

    ESC (electronic speed controller) based on VESC6 schematic

    45 parts5CERN-OHL-S-2.0

Similar boards

  • 2 layers49 × 75 mmDuoDrive, the printed circuit board in 3D

    DuoDrive

    ManhTi3012/DuoDrive

    Duo closed-loop brushed motor driver

    115 parts10
  • 4 layers49.8 × 65.5 mmUSBADC, the printed circuit board in 3D

    USBADC

    BocquelLab/USBADC

    An external ADC interfaced over USB

    113 parts
  • 4 layers75 × 71 mmLa pod, the printed circuit board in 3D

    La pod

    azonenberg/starshipraider

    Open hardware test equipment

    213 parts193BSD-3-Clause
  • 6 layers28.3 × 28.3 mmDrone, the printed circuit board in 3D

    Drone

    cookiemonsternz/drone

    F \ish PV is a open source, custom stack, 75mm tinywhoop drone design. It utilises AM32 for the ESC firmware and Betaflight for the flight controller.

    78 parts5
  • 4 layers105 × 60 mmSonyvfd, the printed circuit board in 3D

    Sonyvfd

    MatryoshkaLJY/VFD_Clock_SONY

    用索尼VFD模块做的桌面小摆件

    90 parts
  • 2 layers46 × 46 mmMaiana Blue N2000 v8.2, the printed circuit board in 3D

    Maiana Blue N2000 v8.2

    Haimana/MAIANA_BLUE

    Firmware and hardware materials for the MAIANA-class AIS transponder ecosystem. The design builds on the open MAIANA project (GPL v3, Peter Antypas).

    54 parts3
  • 4 layers162 × 115 mmFome mc, the printed circuit board in 3D

    Fome mc

    halbritt/fome-mc

    FOME-MC integrated single-PCB motorcycle ECU (STM32H753 + 2x STM32F042 WBO)

    514 parts1

Questions

How big is the Vesc PCB?

It measures 62.2 × 129.9 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Vesc use?

196 parts, built around the MCP2551-I/SN-HG, LM5168FDDA, TPS62172DSG and TPS62173DSG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Vesc KiCad files?

From the LJBoxx/Baguette-esc repository on GitHub, at the commit this page was made from: the board is hardware/baguette-84120/vesc.kicad_pcb and its schematic hardware/baguette-84120/Can.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Vesc design in my own project?

Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).