Skip to the content
123456789

LM5163DDA

Texas Instruments

100-V Input, 0.5-A Synchronous Buck DC/DC Converter with Ultra-low IQ

Part id
ti/LM5163DDA
Category
Uncategorised
Package
SOIC8
Pins
9
Used on
6 open-source boards

Overview

The LM5163DDA is an uncategorised made by Texas Instruments in a SOIC8 package with 9 pins. 100-V Input, 0.5-A Synchronous Buck DC/DC Converter with Ultra-low IQ.

PCBKit's library has its KiCad symbol (Regulators:LM5163, from CERN's library) and its footprint (ICs And Semiconductors SMD:SOIC127P600X170-9N-R260X310, from CERN's library), ready for a KiCad board. 6 open-source boards in 6 repositories on GitHub use it.

Symbol

2VIN3EN/UVLO4RON6PGOOD8SW7BST5FB1GND9EP
Regulators:LM5163From CERN's library

Footprint

123456789
ICs And Semiconductors SMD:SOIC127P600X170-9N-R260X310From CERN's library

Pinout

9
The pins of the LM5163DDA
PinNameType
1GNDPower in
2VINInput
3EN/UVLOInput
4RONInput
5FBInput
6PGOODOutput
7BSTInput
8SWOutput
9EPPower in

Open-source boards using it

6
  • 4 layers90 × 50 mmGreenmobi bms, the printed circuit board in 3D

    Greenmobi bms

    G-Pereira/greenmobi-bms

    A VESC compatible battery management system

    141 parts31CERN-OHL-S-2.0
  • 4 layers100.3 × 50.3 mmGreenmobi drive, the printed circuit board in 3D

    Greenmobi drive

    G-Pereira/greenmobi-drive

    A FOC motor drive compatible with VESC

    160 parts1CERN-OHL-S-2.0
  • 2 layers32.4 × 28.4 mmRegulador Vigi V3, the printed circuit board in 3D

    Regulador Vigi V3

    FarwayDot/Adapter_PowerSupply_Vigi

    21 parts
  • 2 layers202.6 × 66 mmWafel eval board, the printed circuit board in 3D

    Wafel eval board

    LVladymyr/WAFEL-Evaluation-Board

    Evaluation board for TI BQ76952 multi-chemistry BMS IC

    253 partsCERN-OHL-S-2.0
  • 4 layers100 × 99.9 mmSolar Project Rev1, the printed circuit board in 3D

    Solar Project Rev1

    Phil-CIA/Solar-Project-200w

    Solar Project 200W is a prototype-first hardware and firmware effort for a 200W-class solar charging system built around a 4S LiFePO4 battery domain.

    174 parts
  • 2 layers48 × 49 mmSwitch, the printed circuit board in 3D

    Switch

    Th3Link/homeautomation

    Components for a CAN-bus home-automation system: relay/rollershutter/ light/button/sensor nodes on a shared CAN bus, bridged to MQTT (and from there to openHAB or Home Assistant) by a gateway.

    67 partsGPL-3.0

Questions

Is there a KiCad symbol and footprint for the LM5163DDA?

Yes. The symbol is Regulators:LM5163 and the footprint ICs And Semiconductors SMD:SOIC127P600X170-9N-R260X310, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM5163DDA?

SOIC8, with 9 pins. Its footprint is drawn on this page.

Which open-source boards use the LM5163DDA?

6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.