
Teresina Rack
marcoallegretti/Teresina-Rack
The goal is an open, self-fabricatable Daisy Patch SM-compatible Eurorack submodule: the same carrier interface and libDaisy application compatibility through a small Teresina firmware variant.
Texas InstrumentsExtended
-40℃~+85℃ 100ppm/℃ 10V 15mA 35uVrms 45uA 45uA Fixed Parallel ±0.5% SOT-23 Voltage Reference ROHS
The LM4040C10IDBZR is a voltage Reference made by Texas Instruments in a SOT-23 package with 3 pins. -40℃~+85℃ 100ppm/℃ 10V 15mA 35uVrms 45uA 45uA Fixed Parallel ±0.5% SOT-23 Voltage Reference ROHS.
PCBKit's library has its KiCad symbol (4ms-vreg:LM4040, from 4ms) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 14,661 are in stock at JLCPCB (part C201738). 2 open-source boards in 2 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Continuous cathode current IZ | Over free-air temperature range | min -10 · max 25 mA | 5 |
| Operating virtual junction temperature TJ | max 150 °C | 5 | |
| Storage temperature range Tstg | min -65 · max 150 °C | 5 | |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; ± rating | min -2000 · max 2000 V | 5 |
| Electrostatic discharge V(ESD) | Charged device model (CDM), per JEDEC specification JESD22-C101, all pins; ± rating | min -500 · max 500 V | 5 |
| Cathode current IZ | Minimum specified in parametric tables | max 15 mA | 5 |
| Free-air temperature TA | LM4040xxxI | min -40 · max 85 °C | 5 |
| Junction-to-ambient thermal resistance RθJA | DBZ, 3 PINS | typ 206 °C/W | 5 |
| Reverse breakdown voltage VZ | LM4040C10I; IZ = 150uA; TA = 25°C | typ 10 V | 23 |
| Reverse breakdown voltage tolerance ΔVZ | LM4040C10I; IZ = 150uA; TA = 25°C | min -50 · max 50 mV | 23 |
| Reverse breakdown voltage tolerance ΔVZ | LM4040C10I; IZ = 150uA; full-range TA = –40°C to 85°C | min -115 · max 115 mV | 23 |
| Minimum cathode current IZ,min | LM4040C10I; TA = 25°C | typ 75 · max 120 uA | 23 |
| Minimum cathode current IZ,min | LM4040C10I; full-range TA = –40°C to 85°C | max 125 uA | 23 |
| Average temperature coefficient of reverse breakdown voltage αVZ | LM4040C10I; IZ = 10mA; TA = 25°C; typical value stated as ±40 | typ 40 ppm/°C | 23 |
| Average temperature coefficient of reverse breakdown voltage αVZ | LM4040C10I; IZ = 1mA; TA = 25°C; typical value stated as ±20 | typ 20 ppm/°C | 23 |
| Average temperature coefficient of reverse breakdown voltage αVZ | LM4040C10I; IZ = 1mA; full-range TA = –40°C to 85°C; maximum magnitude stated as ±100 | max 100 ppm/°C | 23 |
| Average temperature coefficient of reverse breakdown voltage αVZ | LM4040C10I; IZ = 150uA; TA = 25°C; typical value stated as ±20 | typ 20 ppm/°C | 23 |
| Reverse breakdown voltage change with cathode current change DVZ/DI Z | LM4040C10I; IZ,min < IZ < 1mA; TA = 25°C | typ 0.8 · max 1.5 mV | 23 |
| Reverse breakdown voltage change with cathode current change DVZ/DI Z | LM4040C10I; IZ,min < IZ < 1mA; full-range TA = –40°C to 85°C | max 3.8 mV | 23 |
| Reverse breakdown voltage change with cathode current change DVZ/DI Z | LM4040C10I; 1mA < IZ < 15mA; TA = 25°C | typ 8 · max 14 mV | 23 |
| Reverse breakdown voltage change with cathode current change DVZ/DI Z | LM4040C10I; 1mA < IZ < 15mA; full-range TA = –40°C to 85°C | max 24 mV | 23 |
| Reverse dynamic impedance ZZ | LM4040C10I; IZ = 1mA; f = 120Hz; IAC = 0.1 IZ; TA = 25°C | typ 0.7 · max 1.7 Ω | 23 |
| Wideband noise eN | LM4040C10I; IZ = 150uA; 10Hz ≤ f ≤ 10kHz; TA = 25°C | typ 180 uVRMS | 23 |
| Long-term stability of reverse breakdown voltage | LM4040C10I; t = 1000 h; TA = 25°C ± 0.1°C; IZ = 150uA | typ 120 ppm | 23 |
| Thermal hysteresis(1) VHYST | LM4040C10I; ΔTA = –40°C to 125°C; typical value printed as 0.08% | typ 0.08 — | 23 |
| Average temperature coefficient of reverse breakdown voltage αVZ | LM4040C10I; IZ = 1mA; full-range TA = –40°C to 85°C; limit stated as ±100 | max 100 ppm/°C | 23 |
| Thermal hysteresis VHYST | LM4040C10I; ΔTA = –40°C to 125°C; typical value stated as 0.08% | typ 0.08 — | 23 |

marcoallegretti/Teresina-Rack
The goal is an open, self-fabricatable Daisy Patch SM-compatible Eurorack submodule: the same carrier interface and libDaisy application compatibility through a small Teresina firmware variant.

Yes. The symbol is 4ms-vreg:LM4040 and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.
SOT-23, with 3 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C201738, with 14,661 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the LM4040AIM3-10/TR by HGSEMI, the LM4040BIM3-10/TR by HGSEMI, the LM4040CIM3-10/TR by HGSEMI and the LM4040AIM3-10.0 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.