Skip to the content
123

LM3940IT-3.3

Texas InstrumentsExtended

-40℃~+125℃ 1 10mA 150uVrms 1A 200mV@(100mA) 3.3V 7.5V Fixed Over Temperature Protection、Short Circuit Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LM3940IT-3.3
Category
Linear Voltage Regulators (LDO)
Package
TO-220
Pins
3
In stock
50 at JLCPCB (C2863697)
Used on
5 open-source boards

Overview

The LM3940IT-3.3 is a linear Voltage Regulator made by Texas Instruments in a TO-220 package with 3 pins. -40℃~+125℃ 1 10mA 150uVrms 1A 200mV@(100mA) 3.3V 7.5V Fixed Over Temperature Protection、Short Circuit Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT, from PCBKit's generic symbols) and its footprint (EasyEDA_Cloud:TO-220-3_L10.0-W4.5-P2.54-L-1, from EasyEDA), ready for a KiCad board. 50 are in stock at JLCPCB (part C2863697). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

1IN3OUT2GND
Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUTFrom PCBKit's generic symbols

Footprint

123
EasyEDA_Cloud:TO-220-3_L10.0-W4.5-P2.54-L-1From EasyEDA

Pinout

3
The pins of the LM3940IT-3.3
PinNameType
1INPower in
2GNDPower in
3OUTPower out

Open-source boards using it

5
  • 2 layers136.8 × 87 mmJcap, the printed circuit board in 3D

    Jcap

    cspang1/jcap

    JAMMA Custom Arcade Project

    66 parts15MIT
  • 2 layers140 × 90 mmRib, the printed circuit board in 3D

    Rib

    illinoistechrobotics/rib

    The Illinois Tech Robotics RIB is a custom PCB used to control our robots of all sizes.

    96 parts4
  • 2 layersBoard withoutEncoder prev, the printed circuit board in 3D

    Board withoutEncoder prev

    DaniMzT/MonitoringSensorsAutomaticDoor

    Monitoring sensors of an automated door (it can be extended to generic systems). University project

    37 parts
  • 2 layersRaspberry pi hat, the printed circuit board in 3D

    Raspberry pi hat

    Juliandavidquintero/MTP_PCB_TEAM_A

    References: - Connecting power button: https://howchoo.com/pi/how-to-add-a-power-button-to-your-raspberry-pi/ - Connecting decoupling capacitor: https://www.mysensors.org/build/connectradio - Connections between module…

    14 parts
  • 2 layers52.5 × 62.1 mmVerification unit, the printed circuit board in 3D

    Verification unit

    vasavbn2/ECE445

    This is our repo for our ECE445 Key FOB project

    36 parts

Parts like it

4

Questions

Is there a KiCad symbol and footprint for the LM3940IT-3.3?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT and the footprint EasyEDA_Cloud:TO-220-3_L10.0-W4.5-P2.54-L-1, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM3940IT-3.3?

TO-220, with 3 pins. Its footprint is drawn on this page.

Where is the LM3940IT-3.3 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM3940IT-3.3?

JLCPCB lists it as part C2863697, with 50 in stock; the sellers' links on this page open their listings.

What can replace the LM3940IT-3.3?

Parts like it in the library: the TJ1117GS-3.3 by HTC Korea TAEJIN Tech, the IL1117C-3.3ET by IKSEMICON, the IL1117C-3.3D0T by IKSEMICON and the IL1117C-3.3 by IKSEMICON. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM3940IT-3.3?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.