2 layers55 × 25 mm
Automatic Light Control Using LDR Sensor
rizallmaarif/Automatic-Light-Control-Using-LDR-Sensor
13 parts
LM358PE3
Texas InstrumentsExtended
0℃~+70℃ 2 20mA 20uV/℃ 250nA 300V/ms 30V 30nA 350uA 3V~30V 40nV/√Hz@1kHz 700kHz 7mV 80dB PDIP-8 Operational Amplifier ROHS
- Part id
- ti/LM358PE3
- Category
- Operational Amplifier
- Package
- PDIP-8
- Pins
- 2
- In stock
- 0 at JLCPCB (C1346264)
- Used on
- 3 open-source boards
Overview
The LM358PE3 is an operational Amplifier made by Texas Instruments in a PDIP-8 package with 8 pins. 0℃~+70℃ 2 20mA 20uV/℃ 250nA 300V/ms 30V 30nA 350uA 3V~30V 40nV/√Hz@1kHz 700kHz 7mV 80dB PDIP-8 Operational Amplifier ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TLV9002QPWRQ1, from EasyEDA) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1346264). 3 open-source boards in 3 repositories on GitHub use it.
Symbol
Footprint
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | OUT1 | Output |
| 2 | IN1- | Unspecified |
| 3 | IN1+ | Unspecified |
| 4 | V- | Unspecified |
| 5 | IN2+ | Unspecified |
| 6 | IN2- | Unspecified |
| 7 | OUT2 | Output |
| 8 | V+ | Unspecified |
Open-source boards using it
3- 2 layers93 × 48.3 mm
- 2 layers74.5 × 44.5 mm
PeripheralBoard
rhit-bouchemj/AnesthesiaSeniorDesign
The Repo for Senior Design project of creating an Open-Source Anesthesia Pump
7 parts
Parts like it
8
LM358N
DIP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 30mA 3V~36V 50nA 7mV 800uA 80dB Built-in compensation DIP-8 Operational Amplifier ROHSHGSEMIOperational AmplifierLM358N/NOPB
PDIP-8-16V~-1.5V、1.5V~16V 0℃~+70℃ 1MHz 1mA 2 2mV 3V~32V 40mA 45nA 5nA 65dB 7uV/℃ Built-in compensation PDIP-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLM258P
DIP-8-16V~-1.5V、1.5V~16V -25℃~+85℃ 150nA 2 20mA 2nA 300V/ms 3V~32V 3mV 40nV/√Hz@1kHz 700kHz 700uA 7uV/℃ 80dB EMI filtering/RF suppression DIP-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLM741CN/NOPB
DIP-8-18V~18V 0℃~+70℃ 1 1.5MHz 1.7mA 25mA 2mV 300nA 500V/ms 7.5uV/℃ 80nA 90dB Overvoltage protection DIP-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierNE5532P
PDIP-8-15V~15V 0℃~+70℃ 100dB 10MHz 150nA 16mA 1uA 2 38mA 4mV 5nV/√Hz@1kHz 5uV/℃ 9V/us Built-in compensation PDIP-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLM358N(XBLW)
DIP-8-12V~-1.5V、1.5V~12V 0℃~+70℃ 2 3V~24V 3nA 40mA 45nA 500uA 5mV 600V/ms 7uV/℃ 90dB DIP-8 Operational Amplifier ROHSXBLWOperational AmplifierUA741CP(XBLW)
DIP-8-22V~22V 0℃~+70℃ 1 1.7mA 200nA 25mA 500V/ms 6mV 800nA 96dB DIP-8 Operational Amplifier ROHSXBLWOperational AmplifierUA741CP
PDIP-8-15V~15V -5V~15V 0℃~+70℃ 1 2.8mA 200nA 40mA 500V/ms 500nA 6mV 90dB Built-in compensation PDIP-8 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
Questions
Is there a KiCad symbol and footprint for the LM358PE3?
Yes. The symbol is EasyEDA_Cloud:TLV9002QPWRQ1 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LM358PE3?
PDIP-8, with 8 pins. Its footprint is drawn on this page.
Where is the LM358PE3 datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the LM358PE3?
JLCPCB lists it as part C1346264, with 0 in stock; the sellers' links on this page open their listings.
What can replace the LM358PE3?
Parts like it in the library: the LM358N by HGSEMI, the LM358N/NOPB by Texas Instruments, the LM258P by Texas Instruments and the LM741CN/NOPB by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the LM358PE3?
3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.