LM3478MAX
Texas InstrumentsExtended
-40℃~+125℃@(TJ) 1 1MHz 2.97V~40V Adjustable Boost Boost、SEPIC、Flyback External No SOIC-8 DC-DC Converters ROHS
- Part id
- ti/LM3478MAX
- Category
- DC DC Converters
- Package
- SOIC-8
- Pins
- 8
- In stock
- 7,364 at JLCPCB (C115907)
Overview
The LM3478MAX is a DC DC Converter made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+125℃@(TJ) 1 1MHz 2.97V~40V Adjustable Boost Boost、SEPIC、Flyback External No SOIC-8 DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (Regulator_Controller:LM3478MA, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 7,364 are in stock at JLCPCB (part C115907).
Symbol
Footprint
From the datasheet
12- Supply, least
- 2.97 V · VIN, recommended operating minimum · p. 4
- Supply, most
- 40 V · VIN, recommended operating maximum · p. 4
- Supply, absolute maximum
- 45 V · VIN, absolute maximum · p. 4
- Junction, hottest
- 150 °C · Junction temperature absolute maximum · p. 4
- Takes working
- 2.7 mA · VIN, typical non-switching supply current, FA/SD grounded through 40K resistor · p. 5
- Takes asleep
- 5 µA · VIN, typical shutdown current, VFA/SD = 5V, VIN = 5V · p. 5
- Feedback reference
- 1.26 V · FB, typical feedback voltage, VCOMP = 1.4V · p. 5
- Switches at
- 400 kHz · Typical nominal switching frequency, RFA = 40KΩ · p. 5
- Junction to air (D)
- 105.3 K/W · Junction-to-ambient thermal resistance · p. 4
- Junction to case (D)
- 50.3 K/W · Junction-to-case top thermal resistance · p. 4
- Junction to board (D)
- 55.8 K/W · Junction-to-board thermal resistance · p. 4
- Edge
- 25 ns · DR, typical rise time, Cgs = 3000pf, VDR = 0 to 3V · p. 6
What it is and has
9- Converter topologies
- Boost, SEPIC and flyback · p. 1
- Package options
- 8-lead VSSOP-8 and SOIC-8 · p. 1
- Gate driver
- Internal push-pull driver, 1A peak current capability · p. 1
- Protection
- Current limit and thermal shutdown · p. 1
- Soft start
- Internal · p. 1
- Control
- Current mode operation · p. 1
- Undervoltage lockout
- With hysteresis · p. 1
- Adjustable clock frequency
- 100kHz to 1MHz · p. 1
- Internal reference accuracy
- ±2.5% over temperature · p. 1
Around it
1- cap 100pF
- between FB and GND; Optional capacitor to reduce noise. · p. 20
Specifications
77| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Input Voltage | Over operating free-air temperature | max 45 V | 4 |
| FB Pin Voltage | Over operating free-air temperature; strict inequalities | min -0.4 · max 7 V | 4 |
| FA/SD Pin Voltage | Over operating free-air temperature; strict inequalities | min -0.4 · max 7 V | 4 |
| Peak Driver Output Current (<10us) | Pulse duration <10us | max 1 A | 4 |
| Junction Temperature | max 150 °C | 4 | |
| Lead Temperature | Vapor Phase (60s) | max 215 °C | 4 |
| Lead Temperature | Infrared (15s) | max 260 °C | 4 |
| DR Pin Voltage | min -0.4 · max 8 V | 4 | |
| ISEN Pin Voltage | max 500 mV | 4 | |
| Storage temperature Tstg | min -65 · max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins | min -2000 · max 2000 V | 4 |
| Electrostatic discharge V(ESD) | Charged device model (CDM), per JEDEC specification JESD22C101, all pins | min -750 · max 750 V | 4 |
| Supply Voltage | Over operating free-air temperature range | min 2.97 · max 40 V | 4 |
| Junction Temperature Range | min -40 · max 125 °C | 4 | |
| Switching Frequency | min 100 · max 1000 kHz | 4 | |
| Junction-to-ambient thermal resistance RθJA | D, 8 PINS | typ 105.3 °C/W | 4 |
| Junction-to-case (top) thermal resistance RθJC(top) | D, 8 PINS | typ 50.3 °C/W | 4 |
| Junction-to-board thermal resistance RθJB | D, 8 PINS | typ 55.8 °C/W | 4 |
| Junction-to-top characterization parameter ψJT | D, 8 PINS | typ 6.8 °C/W | 4 |
| Junction-to-board characterization parameter ψJB | D, 8 PINS | typ 54.7 °C/W | 4 |
| Feedback Voltage VFB | VCOMP = 1.4V, 2.97 ≤ VIN ≤ 40V; TJ = 25°C | min 1.2416 · typ 1.26 · max 1.2843 V | 5 |
| Feedback Voltage VFB | VCOMP = 1.4V, 2.97 ≤ VIN ≤ 40V, −40°C ≤ TJ ≤ 125°C | min 1.228 · max 1.292 V | 5 |
| Feedback Voltage Line Regulation ΔVLINE | 2.97 ≤ VIN ≤ 40V; TJ = 25°C | typ 0.001 %/V | 5 |
| Output Voltage Load Regulation ΔVLOAD | IEAO Source/Sink; VIN = 12V, RFA = 40kΩ, TJ = 25°C; maximum specified as ±0.5 | max 0.5 %/A | 5 |
| Input Undervoltage Lock-out VUVLO | VIN = 12V, RFA = 40kΩ, TJ = 25°C | typ 2.85 V | 5 |
| Input Undervoltage Lock-out VUVLO | −40°C ≤ TJ ≤ 125°C | max 2.97 V | 5 |
| Input Undervoltage Lock-out Hysteresis VUV(HYS) | VIN = 12V, RFA = 40kΩ, TJ = 25°C | typ 170 mV | 5 |
| Input Undervoltage Lock-out Hysteresis VUV(HYS) | −40°C ≤ TJ ≤ 125°C | min 130 · max 210 mV | 5 |
| Nominal Switching Frequency Fnom | RFA = 40KΩ; VIN = 12V, TJ = 25°C | typ 400 kHz | 5 |
| Nominal Switching Frequency Fnom | RFA = 40KΩ, −40°C ≤ TJ ≤ 125°C | min 350 · max 440 kHz | 5 |
| Driver Switch On Resistance (top) RDS1 (ON) | IDR = 0.2A, VIN= 5V; TJ = 25°C | typ 16 Ω | 5 |
| Driver Switch On Resistance (bottom) RDS2 (ON) | IDR = 0.2A; VIN = 12V, TJ = 25°C | typ 4.5 Ω | 5 |
| Maximum Drive Voltage Swing VDR (max) | VIN ≥ 7.2V | typ 7.2 V | 5 |
| Maximum Duty Cycle Dmax | VIN = 12V, RFA = 40kΩ, TJ = 25°C | typ 100 % | 5 |
| Minimum On Time Tmin (on) | VIN = 12V, RFA = 40kΩ, TJ = 25°C | typ 325 ns | 5 |
| Minimum On Time Tmin (on) | −40°C ≤ TJ ≤ 125°C | min 210 · max 600 ns | 5 |
| Supply Current (non-switching) ISUPPLY | FA/SD pin pulled to ground using a 40K resistor; VIN = 12V, TJ = 25°C | typ 2.7 mA | 5 |
| Supply Current (non-switching) ISUPPLY | FA/SD pin pulled to ground using a 40K resistor; −40°C ≤ TJ ≤ 125°C | max 3.3 mA | 5 |
| Quiescent Current in Shutdown Mode IQ | VFA/SD = 5V, VIN = 5V; FA/SD pulled to 5V using a 40K resistor; TJ = 25°C | typ 5 uA | 5 |
| Quiescent Current in Shutdown Mode IQ | VFA/SD = 5V, VIN = 5V, −40°C ≤ TJ ≤ 125°C; FA/SD pulled to 5V using a 40K resistor | max 10 uA | 5 |
| Current Sense Threshold Voltage VSENSE | VIN = 5V; TJ = 25°C | min 135 · typ 156 · max 180 mV | 5 |
| Current Sense Threshold Voltage VSENSE | VIN = 5V, −40°C ≤ TJ ≤ 125°C | min 125 · max 190 mV | 5 |
| Short-Circuit Current Limit Sense Voltage VSC | VIN = 5V; TJ = 25°C | typ 343 mV | 5 |
| Short-Circuit Current Limit Sense Voltage VSC | VIN = 5V, −40°C ≤ TJ ≤ 125°C | min 250 · max 415 mV | 5 |
| Internal Compensation Ramp Voltage VSL | VIN = 5V; TJ = 25°C | typ 92 mV | 5 |
| Internal Compensation Ramp Voltage VSL | VIN = 5V, −40°C ≤ TJ ≤ 125°C | min 52 · max 132 mV | 5 |
| VSL/VSENSE VSL ratio | VIN = 12V, RFA = 40kΩ, TJ = 25°C | min 0.3 · typ 0.49 · max 0.7 | 5 |
| Output Over-voltage Protection (with respect to feedback voltage) VOVP | VCOMP = 1.4V; SOIC Package, TJ = 25°C | min 32 · typ 50 mV | 5 |
| Output Over-voltage Protection (with respect to feedback voltage) VOVP | VCOMP = 1.4V, −40°C ≤ TJ ≤ 125°C; SOIC Package | min 25 mV | 5 |
| Output Over-voltage Protection (with respect to feedback voltage) VOVP | SOIC Package; TJ = 25°C | max 78 mV | 5 |
| Output Over-voltage Protection (with respect to feedback voltage) VOVP | SOIC Package, −40°C ≤ TJ ≤ 125°C | max 100 mV | 5 |
| Output Over-Voltage Protection Hysteresis VOVP(HYS) | VCOMP = 1.4V; TJ = 25°C | typ 60 mV | 5 |
| Output Over-Voltage Protection Hysteresis VOVP(HYS) | VCOMP = 1.4V, −40°C ≤ TJ ≤ 125°C | min 20 · max 110 mV | 5 |
| Error Amplifier Transconductance Gm | VCOMP = 1.4V, IEAO = 100uA (Source/Sink); TJ = 25°C | min 600 · typ 800 · max 1000 uS | 5 |
| Error Amplifier Transconductance Gm | VCOMP = 1.4V, IEAO = 100uA (Source/Sink), −40°C ≤ TJ ≤ 125°C | min 365 · max 1265 uS | 5 |
| Error Amplifier Voltage Gain AVOL | VCOMP = 1.4V, IEAO = 100uA (Source/Sink); TJ = 25°C | typ 38 V/V | 6 |
| Error Amplifier Voltage Gain AVOL | VCOMP = 1.4V, IEAO = 100uA (Source/Sink), −40°C ≤ TJ ≤ 125°C | min 26 · max 44 V/V | 6 |
| Error Amplifier Output Current (Source/ Sink) IEAO | Source, VCOMP = 1.4V, VFB = 0V; TJ = 25°C | min 80 · typ 110 · max 170 uA | 6 |
| Error Amplifier Output Current (Source/ Sink) IEAO | Source, VCOMP = 1.4V, VFB = 0V, −40°C ≤ TJ ≤ 125°C | min 50 · max 220 uA | 6 |
| Error Amplifier Output Current (Source/ Sink) IEAO | Sink, VCOMP = 1.4V, VFB = 1.4V; TJ = 25°C | min -70 · typ -140 · max -180 uA | 6 |
| Error Amplifier Output Current (Source/ Sink) IEAO | Sink, VCOMP = 1.4V, VFB = 1.4V, −40°C ≤ TJ ≤ 125°C | min -60 · max -185 uA | 6 |
| Error Amplifier Output Voltage Swing VEAO | Upper Limit, VFB = 0V, COMP Pin = Floating; TJ = 25°C | typ 2.2 V | 6 |
| Error Amplifier Output Voltage Swing VEAO | Upper Limit, VFB = 0V, COMP Pin = Floating, −40°C ≤ TJ ≤ 125°C | min 1.8 · max 2.4 V | 6 |
| Error Amplifier Output Voltage Swing VEAO | Lower Limit, VFB = 1.4V; TJ = 25°C | typ 0.56 V | 6 |
| Error Amplifier Output Voltage Swing VEAO | Lower Limit, VFB = 1.4V, −40°C ≤ TJ ≤ 125°C | min 0.2 · max 1 V | 6 |
| Internal Soft-Start Delay TSS | VFB = 1.2V, VCOMP = Floating; VIN = 12V, RFA = 40kΩ, TJ = 25°C | typ 4 ms | 6 |
| Drive Pin Rise Time Tr | Cgs = 3000pf, VDR = 0 to 3V; VIN = 12V, RFA = 40kΩ, TJ = 25°C | typ 25 ns | 6 |
| Drive Pin Fall Time Tf | Cgs = 3000pf, VDR = 0 to 3V; VIN = 12V, RFA = 40kΩ, TJ = 25°C | typ 25 ns | 6 |
| Shutdown threshold VSD | Output = High; TJ = 25°C | typ 1.27 V | 6 |
| Shutdown threshold VSD | Output = High, −40°C ≤ TJ ≤ 125°C | max 1.4 V | 6 |
| Shutdown threshold VSD | Output = Low; TJ = 25°C | typ 0.65 V | 6 |
| Shutdown threshold VSD | Output = Low, −40°C ≤ TJ ≤ 125°C | min 0.3 V | 6 |
| Shutdown Pin Current ISD | VSD = 5V; VIN = 12V, RFA = 40kΩ, TJ = 25°C | typ -1 uA | 6 |
| Shutdown Pin Current ISD | VSD = 0V; VIN = 12V, RFA = 40kΩ, TJ = 25°C | typ 1 uA | 6 |
| Feedback Pin Current IFB | VIN = 12V, RFA = 40kΩ, TJ = 25°C | typ 15 nA | 6 |
| Thermal Shutdown TSD | VIN = 12V, RFA = 40kΩ, TJ = 25°C | typ 165 °C | 6 |
| Thermal Shutdown Hysteresis Tsh | VIN = 12V, RFA = 40kΩ, TJ = 25°C | typ 10 °C | 6 |
Pins, by the datasheet
8- 1 ISEN
- Current sense input receiving the voltage across an external sense resistor. · p. 3
- 2 COMP
- Compensation pin; connect a resistor and capacitor combination to compensate the control loop. · p. 3
- 3 FB
- Feedback pin; use an output resistor divider to provide 1.26V. · p. 3
- 4 AGND
- Analog ground pin. · p. 3
- 5 PGND
- Power ground pin. · p. 3
- 6 DR
- Drive pin; connect to the gate of the external MOSFET. · p. 3
- 7 FA/SD
- Frequency adjust and shutdown pin; a resistor sets oscillator frequency, and a high level longer than 30us turns the device off. · p. 3
- 8 VIN
- Power Supply Input pin. · p. 3
Parts like it
8XL1509-5.0E1
SOIC-8-40℃~+85℃ 1 150kHz 2A 2mA 4.5V~40V 5V Buck Buck Built-in Fixed No SOIC-8 DC-DC Converters ROHSXLSEMIDC-DC ConvertersXL1509-ADJE1
SOIC-8-40℃~+85℃ 1 1.23V~37V 127kHz~173kHz 2A 2mA 4.5V~40V Adjustable Buck Buck Built-in No SOIC-8 DC-DC Converters ROHSXLSEMIDC-DC ConvertersXL1410E1
SOIC-8-40℃~+125℃@(TJ) 1 1.222V~25V 2A 3.6V~28V 323kHz~437kHz、380kHz 3mA Adjustable Buck Buck Built-in No SOIC-8 DC-DC Converters ROHSXLSEMIDC-DC ConvertersMC34063AD
SOIC-80℃~+70℃@(TA) 1 1.25V~40V 1.5A 100kHz 3V~40V Adjustable Boost、Buck Buck、Boost Built-in No SOIC-8 DC-DC Converters ROHSonsemiDC-DC ConvertersTPS54231D
SOIC-8-40℃~+150℃@(TJ) 1 110uA 2A 3.5V~28V 570kHz 800mV~25V Adjustable Buck Buck Built-in No SOIC-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersXL1509-3.3
SOP-8-40℃~+125℃@(TJ) 1 150kHz 2A 2mA 3.3V 4.5V~40V Buck Buck Built-in Fixed No SOP-8 DC-DC Converters ROHSUMWDC-DC ConvertersXL1509-ADJ
SOIC-8-40℃~+125℃ 1 1.23V~37V 150kHz 2A 2mA 4.5V~40V Adjustable Buck Buck Built-in No SOIC-8 DC-DC Converters ROHSUMWDC-DC ConvertersMC34063AD
SOIC-80℃~+70℃@(TA) 1 1.5A 100kHz 3V~40V Adjustable Boost、Buck、Inverting Buck、Boost Built-in No SOIC-8 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
Questions
Is there a KiCad symbol and footprint for the LM3478MAX?
Yes. The symbol is Regulator_Controller:LM3478MA and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LM3478MAX?
SOIC-8, with 8 pins. Its footprint is drawn on this page.
Where is the LM3478MAX datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the LM3478MAX?
JLCPCB lists it as part C115907, with 7,364 in stock; the sellers' links on this page open their listings.
What can replace the LM3478MAX?
Parts like it in the library: the XL1509-5.0E1 by XLSEMI, the XL1509-ADJE1 by XLSEMI, the XL1410E1 by XLSEMI and the MC34063AD by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.