LM2765M6X
Texas InstrumentsExtended
-40℃~+85℃ 1.8V~5.5V 130uA 20mA 20Ω 50kHz 92% Not supported boost converter SOT-23-6 Charge Pumps ROHS
- Part id
- ti/LM2765M6X
- Category
- Charge Pumps
- Package
- SOT-23-6
- Pins
- 6
- In stock
- 563 at JLCPCB (C140270)
Overview
The LM2765M6X is a charge Pump made by Texas Instruments in a SOT-23-6 package with 6 pins. -40℃~+85℃ 1.8V~5.5V 130uA 20mA 20Ω 50kHz 92% Not supported boost converter SOT-23-6 Charge Pumps ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LM2765M6X_NOPB, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 563 are in stock at JLCPCB (part C140270).
Symbol
Footprint
From the datasheet
15- Supply, least
- 1.8 V · V+, operating minimum · p. 5
- Supply, most
- 5.5 V · V+, operating maximum · p. 5
- Supply, absolute maximum
- 5.8 V · V+ to GND or OUT, absolute maximum · p. 4
- Works from
- -40 °C · Ambient temperature minimum · p. 4
- Works up to
- 85 °C · Ambient temperature maximum · p. 4
- Junction, hottest
- 150 °C · Junction temperature absolute maximum · p. 4
- Takes working
- 130 µA · V+ supply current typical, no load, V+ = 5 V · p. 5
- Takes at most
- 450 µA · V+ supply current max, no load, V+ = 5 V · p. 5
- Takes asleep
- 100 nA · Shutdown supply current typical, TJ = 25°C · p. 5
- Gives
- 20 mA · Output current rated minimum, 2.5 V ≤ VIN ≤ 5.5 V · p. 5
- Gives
- 10 mA · Output current rated minimum, 1.8 V ≤ VIN ≤ 2.5 V · p. 5
- Switches at
- 50 kHz · Switching frequency typical · p. 5
- Junction to air (DBV (SOT-23))
- 185.2 K/W · Junction-to-ambient thermal resistance · p. 4
- Junction to case (DBV (SOT-23))
- 131.5 K/W · Junction-to-case top thermal resistance · p. 4
- Junction to board (DBV (SOT-23))
- 34.8 K/W · Junction-to-board thermal resistance · p. 4
What it is and has
4- Conversion
- Doubles input supply voltage · p. 1
- Package
- SOT-23, 6 pins · p. 1
- Output impedance
- 20 Ω typical · p. 1
- Conversion efficiency
- 90% typical at 20 mA · p. 1
Around it
1- cap 3.3-µF
- between CAP+ and CAP−; C1 charge-pump capacitor in the test circuit; maximum ESR 0.3 Ω. Place close to the device with short, wide traces. · p. 5
Specifications
28| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage (V+ to GND or V+ to OUT) | Over operating free-air temperature range | max 5.8 V | 4 |
| OUT continuous output current | Over operating free-air temperature range | max 40 mA | 4 |
| Output short-circuit duration to GND | See footnote (3); prohibited above 85°C | max 1 sec | 4 |
| Continuous power dissipation | TA = 25°C; see footnote (4) | max 600 mW | 4 |
| TJ-MAX TJ-MAX | See footnote (4) | max 150 °C | 4 |
| Storage temperature, Tstg Tstg | min -65 · max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±2000 V | max 2000 V | 4 |
| Electrostatic discharge V(ESD) | Machine model | max 200 V | 4 |
| Ambient temperature | min -40 · max 85 °C | 4 | |
| Junction temperature | min -40 · max 100 °C | 4 | |
| Junction-to-ambient thermal resistance RθJA | LM2765, DBV (SOT-23), 6 PINS | typ 185.2 °C/W | 4 |
| Junction-to-case (top) thermal resistance RθJC(top) | LM2765, DBV (SOT-23), 6 PINS | typ 131.5 °C/W | 4 |
| Junction-to-board thermal resistance RθJB | LM2765, DBV (SOT-23), 6 PINS | typ 34.8 °C/W | 4 |
| Junction-to-top characterization parameter ψJT | LM2765, DBV (SOT-23), 6 PINS | typ 21.6 °C/W | 4 |
| Junction-to-board characterization parameter ψJB | LM2765, DBV (SOT-23), 6 PINS | typ 34.1 °C/W | 4 |
| Supply voltage V+ | TJ = 25°C, C1 = C2 = 3.3 uF | min 1.8 · max 5.5 V | 5 |
| Supply current IQ | No load; V+ = 5 V, TJ = 25°C, C1 = C2 = 3.3 uF; maximum applies over full operating temperature range | typ 130 · max 450 uA | 5 |
| Shutdown supply current ISD | V+ = 5 V, TJ = 25°C, C1 = C2 = 3.3 uF; maximum applies over full operating temperature range | typ 0.1 · max 0.5 uA | 5 |
| Shutdown supply current ISD | TA = 85°C, V+ = 5 V, C1 = C2 = 3.3 uF | typ 0.2 uA | 5 |
| Shutdown pin input voltage VSD | Shutdown mode; V+ = 5 V; minimum applies over full operating temperature range | min 2 V | 5 |
| Shutdown pin input voltage VSD | Normal operation; V+ = 5 V; maximum applies over full operating temperature range | max 0.6 V | 5 |
| Output current IL | 2.5 V ≤ VIN ≤ 5.5 V; minimum applies over full operating temperature range; C1 = C2 = 3.3 uF | min 20 mA | 5 |
| Output current IL | 1.8 V ≤ VIN ≤ 2.5 V; minimum applies over full operating temperature range; C1 = C2 = 3.3 uF | min 10 mA | 5 |
| Output resistance ROUT | IL = 20 mA, V+ = 5 V, TJ = 25°C, C1 = C2 = 3.3 uF; maximum applies over full operating temperature range; includes internal switch resistance and capacitor ESR | typ 20 · max 40 Ω | 5 |
| Oscillator frequency ƒOSC | V+ = 5 V, TJ = 25°C, C1 = C2 = 3.3 uF; minimum and maximum apply over full operating temperature range; ƒOSC = 2ƒSW | min 40 · typ 100 · max 200 kHz | 5 |
| Switching frequency ƒSW | V+ = 5 V, TJ = 25°C, C1 = C2 = 3.3 uF; minimum and maximum apply over full operating temperature range; ƒOSC = 2ƒSW | min 20 · typ 50 · max 100 kHz | 5 |
| Power efficiency PEFF | RL (1 kΩ) between GND and OUT; V+ = 5 V, TJ = 25°C, C1 = C2 = 3.3 uF | typ 92 % | 5 |
| Voltage conversion efficiency VOEFF | No load; V+ = 5 V, TJ = 25°C, C1 = C2 = 3.3 uF | typ 99.96 % | 5 |
Pins, by the datasheet
6- 1 V+
- Power supply positive voltage input. · p. 3
- 2 GND
- Power supply ground input. · p. 3
- 3 CAP−
- Connect to the negative terminal of the charge-pump capacitor. · p. 3
- 4 SD
- Shutdown control pin; tie to ground in normal operation. · p. 3
- 5 OUT
- Positive voltage output. · p. 3
- 6 CAP+
- Connect to the positive terminal of the charge-pump capacitor. · p. 3
Ordering codes, by the datasheet
3- LM2765M6X/NOPB
- SOT-23 (DBV) · 3000 units, LARGE T&R; -40 to 85°C; SN lead finish; S15B marking · p. 15
- LM2765M6X/NOPB.A
- SOT-23 (DBV) · Ordering suffix .A; 3000 units, LARGE T&R; -40 to 85°C; no other difference stated · p. 15
- LM2765M6X/NOPB.B
- SOT-23 (DBV) · Ordering suffix .B; 3000 units, LARGE T&R; -40 to 85°C; no other difference stated · p. 15
Parts like it
8LM2664M6X
SOT-23-6-40℃~+85℃ -5.5V~-1.8V 1.8V~5.5V 12Ω 220uA 40mA 80kHz 91% Inverted Not supported SOT-23-6 Charge Pumps ROHSTexas InstrumentsCharge PumpsME2135A50M6G
SOT-23-6-40℃~+125℃ 2.7V~5.5V 300mA 4.85V~5.15V 650kHz 800uA 81% boost converter SOT-23-6 Charge Pumps ROHSMICRONECharge PumpsLM2776DBV
SOT-23-6-40℃~+85℃ -5.5V~-2.7V 2.5Ω 2.7V~5.5V 200mA 200uA 2MHz 90% Inverted Support SOT-23-6 Charge Pumps ROHSTexas InstrumentsCharge PumpsTX4310B
SOT-23-6-40℃~+85℃ 1.2MHz 1.8V~5V 3.17V~3.43V 300mA 650uA 83% boost converter SOT-23-6 Charge Pumps ROHSXDSCharge PumpsHX4002-MFC
SOT-23-6-40℃~+85℃ 1.2MHz 1.8mA 2.7V~5V 250mA 4.8V~5.2V 83% boost converter SOT-23-6 Charge Pumps ROHSHEXINCharge PumpsME2135A33M6G
SOT-23-6-40℃~+125℃ 1.8V~5.5V 250mA 3.3V 400uA 650kHz boost converter SOT-23-6 Charge Pumps ROHSMICRONECharge PumpsSGM3204YN6G/TR
SOT-23-6-40℃~+85℃ 1.4V~5.5V 1.84mA 200mA 4.2Ω 80% 950kHz Inverted SOT-23-6 Charge Pumps ROHSSG MicroCharge PumpsHX4004A-MFC
SOT-23-6-40℃~+85℃ 170uA 2.7V~4.5V 230mA 360kHz 4.83V~4.97V 78% boost converter SOT-23-6 Charge Pumps ROHSHEXINCharge Pumps
Questions
Is there a KiCad symbol and footprint for the LM2765M6X?
Yes. The symbol is EasyEDA_Cloud:LM2765M6X_NOPB and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LM2765M6X?
SOT-23-6, with 6 pins. Its footprint is drawn on this page.
Where is the LM2765M6X datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the LM2765M6X?
JLCPCB lists it as part C140270, with 563 in stock; the sellers' links on this page open their listings.
What can replace the LM2765M6X?
Parts like it in the library: the LM2664M6X by Texas Instruments, the ME2135A50M6G by MICRONE, the LM2776DBV by Texas Instruments and the TX4310B by XDS. Check their datasheets: a part that fits the footprint may still differ in its ratings.