Skip to the content
1234

LM1117MPX-ADJ

Texas InstrumentsExtended

0℃~+125℃@(Tj) 1 1.25V~13.8V 1.2V@(800mA) 15V 5mA 75dB@(120Hz) 800mA Adjustable Over Current Protection、Over Temperature Protection Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LM1117MPX-ADJ
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-223-4
Pins
4
In stock
23,506 at JLCPCB (C263277)
Used on
2 open-source boards

Overview

The LM1117MPX-ADJ is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-223-4 package with 4 pins. 0℃~+125℃@(Tj) 1 1.25V~13.8V 1.2V@(800mA) 15V 5mA 75dB@(120Hz) 800mA Adjustable Over Current Protection、Over Temperature Protection Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulators:REG3+1 1ADJ-2OUT-3IN+4OUT, from CERN's library) and its footprint (ICs And Semiconductors SMD:SOT230P700X180-4N, from CERN's library), ready for a KiCad board. 23,506 are in stock at JLCPCB (part C263277). 2 open-source boards in 1 repository on GitHub use it.

Symbol

3IN1ADJ2OUT4OUT
Regulators:REG3+1 1ADJ-2OUT-3IN+4OUTFrom CERN's library

Footprint

1234
ICs And Semiconductors SMD:SOT230P700X180-4NFrom CERN's library

Pinout

4
The pins of the LM1117MPX-ADJ
PinNameType
1ADJPower in
2OUTPower in
3INInput
4OUTPower in

Open-source boards using it

2
  • 2 layers57 × 50 mmAf4-trigger hat pre LED resistor change, the printed circuit board in 3D

    Af4-trigger hat pre LED resistor change

    kenbrinkman/af4-poe-trigger

    DIY replacement for the inD connect dongle: ESPHome on an ESP32-POE-ISO triggers the aF4 frozen-food feeder's 0-10V port, scheduled from Home Assistant. Includes wiring, BOM, and printable enclosure

    28 parts1
  • 2 layers57 × 50 mmAf4-trigger hat, the printed circuit board in 3D

    Af4-trigger hat

    kenbrinkman/af4-poe-trigger

    DIY replacement for the inD connect dongle: ESPHome on an ESP32-POE-ISO triggers the aF4 frozen-food feeder's 0-10V port, scheduled from Home Assistant. Includes wiring, BOM, and printable enclosure

    28 parts1

Parts like it

7

Questions

Is there a KiCad symbol and footprint for the LM1117MPX-ADJ?

Yes. The symbol is Regulators:REG3+1 1ADJ-2OUT-3IN+4OUT and the footprint ICs And Semiconductors SMD:SOT230P700X180-4N, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM1117MPX-ADJ?

SOT-223-4, with 4 pins. Its footprint is drawn on this page.

Where is the LM1117MPX-ADJ datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM1117MPX-ADJ?

JLCPCB lists it as part C263277, with 23,506 in stock; the sellers' links on this page open their listings.

What can replace the LM1117MPX-ADJ?

Parts like it in the library: the LD1117S by STMicroelectronics, the LM1117IMPX-ADJ by Texas Instruments, the LM317EMP by Texas Instruments and the TLV1117CDCY by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM1117MPX-ADJ?

2 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.