ISOW7742FDFMR
Texas InstrumentsExtended
-40℃~+125℃ 1480mW Isolation Over Voltage Protection、Under Voltage Protection、Short Circuit Protection、Soft Start、Over Temperature Protection DFM-20 AC-DC Controllers and Regulators ROHS
- Part id
- ti/ISOW7742FDFMR
- Category
- AC DC Controllers And Regulators
- Package
- DFM-20
- Pins
- 20
- In stock
- 0 at JLCPCB (C5216370)
Overview
The ISOW7742FDFMR is an AC DC Controllers And Regulator made by Texas Instruments in a DFM-20 package with 20 pins. -40℃~+125℃ 1480mW Isolation Over Voltage Protection、Under Voltage Protection、Short Circuit Protection、Soft Start、Over Temperature Protection DFM-20 AC-DC Controllers and Regulators ROHS.
PCBKit's library has its KiCad symbol (Isolator:ISOW7742, from KiCad's library) and its footprint (Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C5216370).
Symbol
Footprint
Pinout
20| Pin | Name | Type |
|---|---|---|
| 1 | VIO | Power in |
| 2 | INA | Input |
| 3 | INB | Input |
| 4 | OUTC | Output |
| 5 | OUTD | Output |
| 6 | GNDIO | Power in |
| 7 | EN_IO1 | Input |
| 8 | EN/FLT | Input/output |
| 9 | VDD | Power in |
| 10 | GND1 | Power in |
| 11 | GND2 | Power out |
| 12 | VISOOUT | Power out |
| 13 | VSEL | Input |
| 14 | EN_IO2 | Input |
| 15 | GISOIN | Power in |
| 16 | IND | Input |
| 17 | INC | Input |
| 18 | OUTB | Output |
| 19 | OUTA | Output |
| 20 | VISOIN | Power in |
Parts like it
8HR1211GY-0001-Z
SOIC-20-40℃~+125℃ 1.92W 12V~35V 16.6kHz~18.7kHz 700V CCM、DCM Half-Bridge Isolation Over Temperature Protection、Over Voltage Protection、Under Voltage Protection、Over Current Protection SOIC-20 AC-DC Controllers and Regulators ROHSMonolithic Power SystemsAC-DC Controllers And RegulatorsUCC28070DW
SOIC-20-300mil-40℃~+125℃ 105kHz 11.2V~21V 12mA 250mA 250mA CCM PFCController 软启动、过压保护、欠压锁定、带使能、逐周期过流保护 SOIC-20-300mil PFC Controllers ROHSTexas InstrumentsAC-DC Controllers And RegulatorsSTNRG012
SOIC-20-300mil-40℃~+150℃@(Tj) 18V~19V 60MHz 800V Half-Bridge Non-Isolated Over Voltage Protection、Under Voltage Protection、Over Current Protection、Short Circuit Protection、Soft Start、Over Temperature Protection、Constant Current Mode (CC)、Constant Voltage (CV) Secondary-Side Feedback SOIC-20-300mil AC-DC Controllers and Regulators ROHSSTMicroelectronicsAC-DC Controllers And RegulatorsISOW1432DFMR
DFM-20Fail-safe circuit、Single-side power isolation、Status indication DFM-20 Isolated RS-485/422 Transceivers with power ROHSTexas InstrumentsAC-DC Controllers And RegulatorsISOW7741DFMR
DFM-20-40℃~+125℃ 1.48W 3V~5.5V Isolation DFM-20 Digital Isolators (with Power) ROHSTexas InstrumentsAC-DC Controllers And RegulatorsISOW7742DFMR
DFM-20DFM-20 Digital Isolators (with Power) ROHSTexas InstrumentsAC-DC Controllers And RegulatorsISOW1044BDFMR
DFM-20CAN FD、总线故障检测与保护、低功耗模式、唤醒功能、使能/关断模式 DFM-20 Isolated CAN Transceivers (with Power) ROHSTexas InstrumentsAC-DC Controllers And RegulatorsLT1509CSW#TRPBF
SO-20-300milSO-20-300mil AC-DC Controllers and Regulators ROHSAnalog DevicesAC-DC Controllers And Regulators
Questions
Is there a KiCad symbol and footprint for the ISOW7742FDFMR?
Yes. The symbol is Isolator:ISOW7742 and the footprint Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ISOW7742FDFMR?
DFM-20, with 20 pins. Its footprint is drawn on this page.
Where is the ISOW7742FDFMR datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the ISOW7742FDFMR?
JLCPCB lists it as part C5216370, with 0 in stock; the sellers' links on this page open their listings.
What can replace the ISOW7742FDFMR?
Parts like it in the library: the HR1211GY-0001-Z by Monolithic Power Systems, the UCC28070DW by Texas Instruments, the STNRG012 by STMicroelectronics and the ISOW1432DFMR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.