INA186A3IDCK
Texas InstrumentsExtended
-200mV~40V -40℃~+125℃ 0.3V/us 0.5uV/℃ 1 1.7V~5.5V 100V/V 150dB 35kHz 3uV 48uA 500pA 75nV/√Hz@1kHz High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Analog output interface、Input filter、Enable/shutdown function ±42V SC-70-6 Current Sense Amplifiers ROHS
- Part id
- ti/INA186A3IDCK
- Category
- Current Sense Amplifiers
- Package
- SC-70-6
- Pins
- 6
- In stock
- 4,486 at JLCPCB (C2058245)
Overview
The INA186A3IDCK is a current Sense Amplifier made by Texas Instruments in a SC-70-6 package with 6 pins. -200mV~40V -40℃~+125℃ 0.3V/us 0.5uV/℃ 1 1.7V~5.5V 100V/V 150dB 35kHz 3uV 48uA 500pA 75nV/√Hz@1kHz High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Analog output interface、Input filter、Enable/shutdown function ±42V SC-70-6 Current Sense Amplifiers ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:INA186A3IDCKR, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-363_SC-70-6, from KiCad's library), ready for a KiCad board. 4,486 are in stock at JLCPCB (part C2058245).
Symbol
Footprint
From the datasheet
12- Supply, least
- 1.7 V · VS, recommended operating min · p. 4
- Supply, most
- 5.5 V · VS, recommended operating max · p. 4
- Supply, absolute maximum
- 6 V · VS, absolute max · p. 4
- Works from
- -40 °C · Operating free-air temperature min · p. 4
- Works up to
- 125 °C · Operating free-air temperature max · p. 4
- Junction, hottest
- 150 °C · Junction temperature absolute max · p. 4
- Takes working
- 48 µA · VS quiescent current typical, VS = 1.8 V, VSENSE = 0 mV · p. 5
- Takes at most
- 90 µA · VS quiescent current max, VS = 1.8 V, TA = –40°C to +125°C · p. 5
- A pin gives at most
- 5 mA · Input current into any pin absolute max · p. 4
- Junction to air (DCK (SC70))
- 170.7 K/W · Junction-to-ambient thermal resistance · p. 4
- Junction to case (DCK (SC70))
- 132.7 K/W · Junction-to-case (top) thermal resistance · p. 4
- Junction to board (DCK (SC70))
- 65.3 K/W · Junction-to-board thermal resistance · p. 4
What it is and has
7- Gain
- 100 V/V · p. 1
- Current sensing
- Bidirectional · p. 1
- Gain error
- ±1% maximum · p. 1
- Gain drift
- 10 ppm/°C maximum · p. 1
- Offset voltage
- ±50 μV maximum · p. 1
- Offset drift
- 0.5 μV/°C maximum · p. 1
- Package
- SC70, 6 pins, 2.00 mm × 1.25 mm · p. 1
Specifications
36| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage VS | Over operating free-air temperature range | max 6 V | 4 |
| Analog inputs VIN+, VIN– | Differential (VIN+) – (VIN–) | min -42 · max 42 V | 4 |
| Analog inputs VIN+, VIN– | VIN+, VIN–, with respect to GND; minimum GND – 0.3 V | max 42 V | 4 |
| Input current into any pin | Over operating free-air temperature range | max 5 mA | 4 |
| Operating temperature TA | min -55 · max 150 °C | 4 | |
| Junction temperature TJ | max 150 °C | 4 | |
| Storage temperature Tstg | min -65 · max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; value ±3000 V | max 3000 V | 4 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101; value ±1000 V | max 1000 V | 4 |
| Common-mode input range VCM | Minimum GND – 0.2 V | max 40 V | 4 |
| Input pin voltage range VIN+, VIN– | Minimum GND – 0.2 V | max 40 V | 4 |
| Operating supply voltage VS | min 1.7 · max 5.5 V | 4 | |
| Operating free-air temperature TA | min -40 · max 125 °C | 4 | |
| Junction-to-ambient thermal resistance RθJA | DCK (SC70), 6 pins | typ 170.7 °C/W | 4 |
| Junction-to-case (top) thermal resistance RθJC(top) | DCK (SC70), 6 pins | typ 132.7 °C/W | 4 |
| Junction-to-board thermal resistance RθJB | DCK (SC70), 6 pins | typ 65.3 °C/W | 4 |
| Junction-to-top characterization parameter ΨJT | DCK (SC70), 6 pins | typ 45.7 °C/W | 4 |
| Junction-to-board characterization parameter ΨJB | DCK (SC70), 6 pins | typ 65.2 °C/W | 4 |
| Common-mode rejection ratio CMRR | VSENSE = 0 mV, VIN+ = –0.1 V to 40 V, TA = –40°C to +125°C | min 120 · typ 150 dB | 5 |
| Offset voltage, RTI VOS | VS = 1.8 V, VSENSE = 0 mV; maximum ±50 uV | typ -3 · max 50 uV | 5 |
| Offset drift, RTI dVOS/dT | VSENSE = 0 mV, TA = –40°C to +125°C | typ 0.05 · max 0.5 uV/°C | 5 |
| Power-supply rejection ratio, RTI PSRR | VSENSE = 0 mV, VS = 1.7 V to 5.5 V; maximum ±10 uV/V | typ -1 · max 10 uV/V | 5 |
| Input bias current IIB | VSENSE = 0 mV | typ 0.5 · max 3 nA | 5 |
| Input offset current IIO | VSENSE = 0 mV; typical ±0.07 nA | typ 0.07 nA | 5 |
| Gain G | A3 devices | typ 100 V/V | 5 |
| Gain error EG | VOUT = 0.1 V to VS – 0.1 V; maximum ±1% | typ -0.04 · max 1 % | 5 |
| Gain error drift | TA = –40°C to +125°C | typ 2 · max 10 ppm/°C | 5 |
| Nonlinearity error | VOUT = 0.1 V to VS – 0.1 V; typical ±0.01% | typ 0.01 % | 5 |
| Reference voltage rejection ratio RVRR | VREF = 100 mV to VS – 100 mV, TA = –40°C to +125°C; typical ±2 uV/V, maximum ±10 uV/V | typ 2 · max 10 uV/V | 5 |
| Maximum capacitive load | No sustained oscillation | typ 1 nF | 5 |
| Bandwidth BW | A3 devices, CLOAD = 10 pF | typ 35 kHz | 5 |
| Slew rate SR | VS = 5.0 V, VOUT = 0.5 V to 4.5 V | typ 0.3 V/us | 5 |
| Settling time tS | From current step to within 1% of final value | typ 30 us | 5 |
| Voltage noise density | RTI | typ 75 nV/√Hz | 5 |
| Quiescent current IQ | VS = 1.8 V, VSENSE = 0 mV | typ 48 · max 65 uA | 5 |
| Quiescent current IQ | VS = 1.8 V, VSENSE = 0 mV, TA = –40°C to +125°C | max 90 uA | 5 |
Pins, by the datasheet
6- 1 REF
- Reference input; an externally applied voltage enables bidirectional current sensing. · p. 3
- 2 GND
- Ground. · p. 3
- 3 VS
- Power supply, 1.7 V to 5.5 V. · p. 3
- 4 IN+
- Positive sense input; connect to the bus side of the sense resistor for high-side sensing or the load side for low-side sensing. · p. 3
- 5 IN–
- Negative sense input; connect to the load side of the sense resistor for high-side sensing or the ground side for low-side sensing. · p. 3
- 6 OUT
- Analog voltage output equal to the amplified IN+ to IN– voltage difference, offset by the voltage applied to REF. · p. 3
Parts like it
8INA199A1DCK
SC-70-6-300mV~26V -40℃~+105℃ 0.4V/us 0.5uV/℃ 1 120dB 14kHz 2.7V~26V 25nV/√Hz@1kHz 28uA 50V/V 5uV 65uA High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Analog output interface、Input filter、Built-in comparator ±26V SOT-363(SC-70-6) Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense AmplifiersINA213AIDCK
SC-70-6-300mV~26V -40℃~+125℃ 0.4V/us 0.5uV/℃ 1 120dB 25nV/√Hz@1kHz 28uA 50V/V 5uV 65uA 80kHz High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Programmable output reference level、Analog output interface、Input filter ±26V SC-70-6 Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense AmplifiersINA199A2DCK
SOT-363-6-300mV~26V -40℃~+125℃ 0.4V/us 0.5uV/℃ 100V/V 120dB 2.7V~26V 25nV/√Hz@1kHz 28uA 30kHz 5uV 65uA High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Programmable output reference level、Analog output interface、Input filter ±26V SOT-363-6 Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense AmplifiersINA214AIDCK
SOT-363(SC-70-6)-100mV~26V -40℃~+125℃ 0.4V/us 0.5uV/℃ 1 100V/V 100uA 140dB 1uV 2.7V~26V 25nV/√Hz@1kHz 28uA 30kHz High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Programmable output reference level、Analog output interface、Input filter、Enable/shutdown function ±26V SOT-363(SC-70-6) Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense AmplifiersTP181A1-CR
SC70-6-300mV~36V -40℃~+125℃ 0.5uV/℃ 0.6V/us 1 10uV 120dB 120uA 2.7V~30V 35mA 48kHz 50V/V Bidirectional detection、Zero drift / auto-zero SC70-6 Current Sense Amplifiers ROHS3PEAKCurrent Sense AmplifiersINA212AIDCK
SOT-363-6-300mV~26V -40℃~+125℃ 0.4V/us 0.5uV/℃ 1 1000V/V 140dB 2.7V~26V 25nV/√Hz@1kHz 28uA 4kHz 550nV 65uA High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Programmable output reference level、Analog output interface、Input filter、Enable/shutdown function ±26V SOT-363-6 Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense AmplifiersINA186A1IDCK
SC-70-6-200mV~40V -40℃~+125℃ 0.3V/us 0.5uV/℃ 1 1.7V~5.5V 150dB 25V/V 45kHz 48uA 500pA 50uV 75nV/√Hz High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Analog output interface、Input filter、Enable/shutdown function ±42V SC-70-6 Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense AmplifiersINA190A3IDCK
SC-70-6-200mV~40V -40℃~+125℃ 0.3V/us 1 1.7V~5.5V 100V/V 150dB 15uV 35kHz 48uA 500pA 75nV/√Hz@1kHz 80nV/℃ High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Input filter、Enable/shutdown function ±42V SC-70-6 Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense Amplifiers
Questions
Is there a KiCad symbol and footprint for the INA186A3IDCK?
Yes. The symbol is EasyEDA_Cloud:INA186A3IDCKR and the footprint Package_TO_SOT_SMD:SOT-363_SC-70-6, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the INA186A3IDCK?
SC-70-6, with 6 pins. Its footprint is drawn on this page.
Where is the INA186A3IDCK datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the INA186A3IDCK?
JLCPCB lists it as part C2058245, with 4,486 in stock; the sellers' links on this page open their listings.
What can replace the INA186A3IDCK?
Parts like it in the library: the INA199A1DCK by Texas Instruments, the INA213AIDCK by Texas Instruments, the INA199A2DCK by Texas Instruments and the INA214AIDCK by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.