Skip to the content
PCBKitNew board
INA111AP on a board, in 3D

INA111AP

Texas Instruments

-18V~-6V、6V~18V -40℃~+85℃ 0.1pA 1 100dB 10nV/√Hz@1kHz 17V/us 200uV 2MHz 2pA 2uV/℃ 3.3mA 30mA 4us External resistor gain、Overvoltage protection PDIP-8 Instrumentation Amplifiers ROHS

Extended
DatasheetJLCPCBLCSCti/INA111AP
Category
Instrumentation Amplifiers
Package
PDIP-8
Pins
8

Overview

The INA111AP is an instrumentation Amplifier made by Texas Instruments in a PDIP-8 package with 8 pins. -18V~-6V、6V~18V -40℃~+85℃ 0.1pA 1 100dB 10nV/√Hz@1kHz 17V/us 200uV 2MHz 2pA 2uV/℃ 3.3mA 30mA 4us External resistor gain、Overvoltage protection PDIP-8 Instrumentation Amplifiers ROHS.

PCBKit's library has its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 1 are in stock at JLCPCB (part C1346140). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Parameters

15
-3dB Bandwidth
2MHz
Common Mode Rejection Ratio(CMRR)
100dB
Dual Supply
6V~18V
Features
Overvoltage Protection
Ib - Input Bias Current
2pA
Input Offset Current(Ios)
0.1pA
Input Offset Voltage Drift(Vos TC)
2uV/℃
Input Voltage Noise Density
10nV/√Hz@1kHz
Number of Channels
Single-channel
Operating Temperature
-40℃~+85℃
Output Current
30mA
Quiescent Current(Iq)
3.3mA
Settling time
4us
Slew Rate
17V/us
Vos - Input Offset Voltage
200uV

Order codes

1

Open-source boards using it

All 2
  • 2 layers74.3 × 52.7 mmMisura corrente, the printed circuit board in 3D

    Misura corrente

    gabrielebarola/Energy-Meter-progetto-PCTO

    Progetto per il percorso di PCTO 2021/2022

    31 parts1

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/INA111AP" title="INA111AP in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/INA111AP.jpg" alt="INA111AP" width="1200" height="900">
A picture that opens the part, for a README
[![INA111AP](https://pcbkit.io/embed/parts/ti/INA111AP.jpg?size=s)](https://pcbkit.io/parts/ti/INA111AP)

Questions

Is there a KiCad symbol and footprint for the INA111AP?

Yes. the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the INA111AP?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the INA111AP datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the INA111AP?

JLCPCB lists it as part C1346140, with 1 in stock; the sellers' links on this page open their listings.

What can replace the INA111AP?

Parts like it in the library: the INA111BP by Texas Instruments, the INA122P by Texas Instruments, the INA122PA by Texas Instruments and the INA217AIP by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the INA111AP?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8