Skip to the content
PCBKitNew board
12

ESD351DPYR

Texas Instruments

-40℃~+125℃ 1 1.8pF 100pA 3.6V 36W@8/20us 6.1V 6A@8/20us 7.5V ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Unidirectional X1-SON-2(0.6x1) ESD and Surge Protection (TVS/ESD) ROHS

Extended
DatasheetJLCPCBLCSCti/ESD351DPYR
Category
ESD And Surge Protection (TVS, ESD)
Package
X1-SON-2(0.6x1)
Pins
2

Overview

The ESD351DPYR is an ESD And Surge Protection made by Texas Instruments in a X1-SON-2(0.6x1) package with 2 pins. -40℃~+125℃ 1 1.8pF 100pA 3.6V 36W@8/20us 6.1V 6A@8/20us 7.5V ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Unidirectional X1-SON-2(0.6x1) ESD and Surge Protection (TVS/ESD) ROHS.

PCBKit's library has its KiCad symbol (Device:D_TVS, from KiCad's library) and its footprint (EasyEDA_Cloud:SOD993_L1.0-W0.6-LS1.0-RD, from EasyEDA), ready for a KiCad board. 39,917 are in stock at JLCPCB (part C1974929). 10 open-source boards in 5 repositories on GitHub use it.

Symbol

Device:D_TVSFrom KiCad's library

Footprint

12
EasyEDA_Cloud:SOD993_L1.0-W0.6-LS1.0-RDFrom EasyEDA

Parameters

12
Clamping Voltage
6.5V
Junction Capacitance
1.8pF
Number of Channels
Single-channel
Operating Temperature
-40℃~+125℃
Peak Pulse Current (Ipp)
6A@8/20us
Peak Pulse Power Dissipation (Ppp)
36W@8/20us
Polarity
Unidirectional
Reverse Leakage Current (Ir)
100pA
Reverse Stand-Off Voltage (Vrwm)
3.6V
Type
ESD
Voltage - Breakdown
7.5V
level of protection
IEC 61000-4-2

Order codes

1

Pinout

2
The pins of the ESD351DPYR
PinNameType
1A1Passive
2A2Passive

Open-source boards using it

All 10
  • 4 layers40 × 40 mmSTMF405 Flight Controller, the printed circuit board in 3D

    STMF405 Flight Controller

    MatthiasGeorgImhof/STMF405_Flight_Controller

    A flight controller inspired by Speedybee F405 v3 but with CAN and flash memory instead of flash card.

    214 parts1
  • 4 layers40 × 40 mmSTMF765 Flight Controller, the printed circuit board in 3D

    STMF765 Flight Controller

    MatthiasGeorgImhof/STMF765_Flight_Controller

    A flight controller inspired by Speedybee F405 v3 but with CAN using F7 MCU. Use flash memory instead of flash card.

    235 parts1
  • 4 layers71.8 × 109.5 mmMCC22, the printed circuit board in 3D

    MCC22

    ZeniteSolar/MCC22

    Follow the steps below, if any value differs from the expected, abort the test. Power off and on after each step. Always limit the power source to 18V at 100mA. Use this link to find components on the board.

    245 parts1
  • 6 layersPpg pcb v08, the printed circuit board in 3D

    Ppg pcb v08

    holison-001/MVP-PPG

    기존 PPG와 전선 6개로 연결하는 전이중 RS-422 ↔ 3.3V UART 변환 보드다. 같은 작업 폴더에 별도 KiCad 프로젝트로 작성했다. 외부 9V를 PPG와 공유하고, 사용자 지정 LD1117-3.3V로 이 보드의 통신부와 UART 포트용 3.3V를 만든다. MCU는 추가하지 않는다.

    42 parts
  • 4 layers62.3 × 29.5 mmMotokit controlsystem v2, the printed circuit board in 3D

    Motokit controlsystem v2

    S0L1DDEV/motormod-pcb-controlsystem

    CFMoto lightkit mod, driving a lightkit based on engine information read through CAN. This PCB is part of the system responsible for reading frames and outputting a animation on a neopixel lightstrip

    59 parts
  • 4 layersPpg pcb v08, the printed circuit board in 3D

    Ppg pcb v08

    holison-001/MVP-PPG

    기존 PPG와 전선 6개로 연결하는 전이중 RS-422 ↔ 3.3V UART 변환 보드다. 같은 작업 폴더에 별도 KiCad 프로젝트로 작성했다. 외부 9V를 PPG와 공유하고, 사용자 지정 LD1117-3.3V로 이 보드의 통신부와 UART 포트용 3.3V를 만든다. MCU는 추가하지 않는다.

    35 parts
  • 4 layersPpg pcb v08, the printed circuit board in 3D

    Ppg pcb v08

    holison-001/MVP-PPG

    기존 PPG와 전선 6개로 연결하는 전이중 RS-422 ↔ 3.3V UART 변환 보드다. 같은 작업 폴더에 별도 KiCad 프로젝트로 작성했다. 외부 9V를 PPG와 공유하고, 사용자 지정 LD1117-3.3V로 이 보드의 통신부와 UART 포트용 3.3V를 만든다. MCU는 추가하지 않는다.

    37 parts
  • 6 layersPpg pcb v08 via split, the printed circuit board in 3D

    Ppg pcb v08 via split

    holison-001/MVP-PPG

    기존 PPG와 전선 6개로 연결하는 전이중 RS-422 ↔ 3.3V UART 변환 보드다. 같은 작업 폴더에 별도 KiCad 프로젝트로 작성했다. 외부 9V를 PPG와 공유하고, 사용자 지정 LD1117-3.3V로 이 보드의 통신부와 UART 포트용 3.3V를 만든다. MCU는 추가하지 않는다.

    39 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/ESD351DPYR" title="ESD351DPYR in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/ESD351DPYR.jpg" alt="ESD351DPYR" width="1200" height="900">
A picture that opens the part, for a README
[![ESD351DPYR](https://pcbkit.io/embed/parts/ti/ESD351DPYR.jpg?size=s)](https://pcbkit.io/parts/ti/ESD351DPYR)

Questions

Is there a KiCad symbol and footprint for the ESD351DPYR?

Yes. The symbol is Device:D_TVS and the footprint EasyEDA_Cloud:SOD993_L1.0-W0.6-LS1.0-RD, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ESD351DPYR?

X1-SON-2(0.6x1), with 2 pins. Its footprint is drawn on this page.

Where is the ESD351DPYR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the ESD351DPYR?

JLCPCB lists it as part C1974929, with 39,917 in stock; the sellers' links on this page open their listings.

What can replace the ESD351DPYR?

Parts like it in the library: the ESD321DPYR by Texas Instruments, the TPD1E1B04DPYT by Texas Instruments, the TPD4E02B04DQAR by Texas Instruments and the TPD1E01B04DPYR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ESD351DPYR?

10 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8