DS8838N
Texas InstrumentsExtended
4.75V~5.25V PHY Transceiver PDIP-16 Ethernet Transceivers
- Part id
- ti/DS8838N
- Category
- Ethernet Transceivers
- Package
- PDIP-16
- Pins
- 5
- In stock
- 0 at JLCPCB (C3231659)
Overview
The DS8838N is an ethernet Transceiver made by Texas Instruments in a PDIP-16 package with 16 pins. 4.75V~5.25V PHY Transceiver PDIP-16 Ethernet Transceivers.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:DS8838N, from EasyEDA) and its footprint (Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C3231659).
Symbol
Footprint
Pinout
16| Pin | Name | Type |
|---|---|---|
| 1 | BUS3 | Unspecified |
| 2 | IN3 | Unspecified |
| 3 | OUT3 | Unspecified |
| 4 | BUS4 | Unspecified |
| 5 | IN4 | Unspecified |
| 6 | OUT4 | Unspecified |
| 7 | DISABLE_B | Unspecified |
| 8 | GND | Unspecified |
| 9 | DISABLE_A | Unspecified |
| 10 | OUT2 | Unspecified |
| 11 | IN2 | Unspecified |
| 12 | BUS2 | Unspecified |
| 13 | OUT1 | Unspecified |
| 14 | IN1 | Unspecified |
| 15 | BUS1 | Unspecified |
| 16 | VCC | Unspecified |
Parts like it
8LT1081IN
DIP-16-40℃~+85℃ 2 2 22mA 5V Short-Circuit Protection Transceiver Yes DIP-16 RS232 ICs ROHSAnalog DevicesEthernet TransceiversAM26LS29PC
PDIP-160℃~+70℃ 4.75V~5.25V Driver Low-power mode PDIP-16 Ethernet TransceiversAMDEthernet TransceiversLM18293N
DIP-16-40℃~+125℃ 4 4.5V~36V Built-in temperature sensor Driver DIP-16 Ethernet TransceiversTexas InstrumentsEthernet TransceiversSN75114NE4
PDIP-160℃~+70℃ 2 4.75V~5.25V Driver PDIP-16 Ethernet Transceivers ROHSTexas InstrumentsEthernet TransceiversSN75116NE4
PDIP-160℃~+70℃ 5V PHY Transceiver PDIP-16 Ethernet Transceivers ROHSTexas InstrumentsEthernet TransceiversDS75113N
DIP-164.75V~5.25V Short-Circuit Protection DIP-16 Ethernet TransceiversTexas InstrumentsEthernet TransceiversDS75114N
DIP-164.75V~5.25V PHY Transceiver DIP-16 Ethernet TransceiversTexas InstrumentsEthernet TransceiversDS75121N
DIP-162 4.75V~5.25V Error detection and recovery DIP-16 Ethernet TransceiversTexas InstrumentsEthernet Transceivers
Questions
Is there a KiCad symbol and footprint for the DS8838N?
Yes. The symbol is EasyEDA_Cloud:DS8838N and the footprint Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the DS8838N?
PDIP-16, with 16 pins. Its footprint is drawn on this page.
Where can I order the DS8838N?
JLCPCB lists it as part C3231659, with 0 in stock; the sellers' links on this page open their listings.
What can replace the DS8838N?
Parts like it in the library: the LT1081IN by Analog Devices, the AM26LS29PC by AMD, the LM18293N by Texas Instruments and the SN75114NE4 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.