LT1081IN
Analog DevicesExtended
-40℃~+85℃ 2 2 22mA 5V Short-Circuit Protection Transceiver Yes DIP-16 RS232 ICs ROHS
- Part id
- adi/LT1081IN
- Category
- Ethernet Transceivers
- Package
- DIP-16
- Pins
- 16
- In stock
- 0 at JLCPCB (C7451223)
Overview
The LT1081IN is an ethernet Transceiver made by Analog Devices in a DIP-16 package with 16 pins. -40℃~+85℃ 2 2 22mA 5V Short-Circuit Protection Transceiver Yes DIP-16 RS232 ICs ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LT1081IN, from EasyEDA) and its footprint (Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C7451223).
Symbol
Footprint
Pinout
16| Pin | Name | Type |
|---|---|---|
| 1 | C1+ | Unspecified |
| 2 | V+ | Unspecified |
| 3 | C1– | Unspecified |
| 4 | C2+ | Unspecified |
| 5 | C2– | Unspecified |
| 6 | V– | Unspecified |
| 7 | R2_OUT | Unspecified |
| 8 | REC2_IN | Unspecified |
| 9 | REC2_OUT | Unspecified |
| 10 | TR2_IN | Unspecified |
| 11 | TR1_IN | Unspecified |
| 12 | REC1_OUT | Unspecified |
| 13 | REC1_IN | Unspecified |
| 14 | TR1_OUT | Unspecified |
| 15 | GND | Unspecified |
| 16 | VCC | Unspecified |
Parts like it
8AM26LS29PC
PDIP-160℃~+70℃ 4.75V~5.25V Driver Low-power mode PDIP-16 Ethernet TransceiversAMDEthernet TransceiversDS8838N
PDIP-164.75V~5.25V PHY Transceiver PDIP-16 Ethernet TransceiversTexas InstrumentsEthernet TransceiversLM18293N
DIP-16-40℃~+125℃ 4 4.5V~36V Built-in temperature sensor Driver DIP-16 Ethernet TransceiversTexas InstrumentsEthernet TransceiversSN75114NE4
PDIP-160℃~+70℃ 2 4.75V~5.25V Driver PDIP-16 Ethernet Transceivers ROHSTexas InstrumentsEthernet TransceiversSN75116NE4
PDIP-160℃~+70℃ 5V PHY Transceiver PDIP-16 Ethernet Transceivers ROHSTexas InstrumentsEthernet TransceiversDS75113N
DIP-164.75V~5.25V Short-Circuit Protection DIP-16 Ethernet TransceiversTexas InstrumentsEthernet TransceiversDS75114N
DIP-164.75V~5.25V PHY Transceiver DIP-16 Ethernet TransceiversTexas InstrumentsEthernet TransceiversDS75121N
DIP-162 4.75V~5.25V Error detection and recovery DIP-16 Ethernet TransceiversTexas InstrumentsEthernet Transceivers
Questions
Is there a KiCad symbol and footprint for the LT1081IN?
Yes. The symbol is EasyEDA_Cloud:LT1081IN and the footprint Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LT1081IN?
DIP-16, with 16 pins. Its footprint is drawn on this page.
Where is the LT1081IN datasheet?
Analog Devices publishes it: the Datasheet link on this page opens it.
Where can I order the LT1081IN?
JLCPCB lists it as part C7451223, with 0 in stock; the sellers' links on this page open their listings.
What can replace the LT1081IN?
Parts like it in the library: the AM26LS29PC by AMD, the DS8838N by Texas Instruments, the LM18293N by Texas Instruments and the SN75114NE4 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.