DRV8880PWPR
Texas InstrumentsExtended
-40℃~+125℃ 0V~5.3V 16 2 2A 330mΩ 6.5V~45V Bipolar Driver STEP/DIR Yes HTSSOP-28 Stepper Motor Driver ROHS
- Part id
- ti/DRV8880PWPR
- Category
- Stepper Motor Driver
- Package
- HTSSOP-28
- Pins
- 29
- In stock
- 2,061 at JLCPCB (C473386)
Overview
The DRV8880PWPR is a stepper Motor Driver made by Texas Instruments in a HTSSOP-28 package with 29 pins. -40℃~+125℃ 0V~5.3V 16 2 2A 330mΩ 6.5V~45V Bipolar Driver STEP/DIR Yes HTSSOP-28 Stepper Motor Driver ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:DRV8880PWPR, from EasyEDA) and its footprint (EasyEDA_Cloud:HTSSOP-28_L9.8-W4.5-P0.65-LS6.6-BL-EP, from EasyEDA), ready for a KiCad board. 2,061 are in stock at JLCPCB (part C473386).
Symbol
Footprint
Pinout
29| Pin | Name | Type |
|---|---|---|
| 1 | CPL | Unspecified |
| 2 | CPH | Unspecified |
| 3 | VCP | Unspecified |
| 4 | VM | Unspecified |
| 5 | AOUT1 | Unspecified |
| 6 | AISEN | Unspecified |
| 7 | AOUT2 | Unspecified |
| 8 | BOUT2 | Unspecified |
| 9 | BISEN | Unspecified |
| 10 | BOUT1 | Unspecified |
| 11 | VM | Unspecified |
| 12 | GND | Unspecified |
| 13 | ATE | Unspecified |
| 14 | VREF | Unspecified |
| 15 | V3P3 | Unspecified |
| 16 | TOFF | Unspecified |
| 17 | nSLEEP | Unspecified |
| 18 | nFAULT | Unspecified |
| 19 | DECAY1 | Unspecified |
| 20 | DECAY0 | Unspecified |
| 21 | ENABLE | Unspecified |
| 22 | DIR | Unspecified |
| 23 | STEP | Unspecified |
| 24 | M1 | Unspecified |
| 25 | M0 | Unspecified |
| 26 | TRQ1 | Unspecified |
| 27 | TRQ0 | Unspecified |
| 28 | GND | Unspecified |
| 29 | EP | Unspecified |
Parts like it
8DRV8818PWPR
HTSSOP-28-40℃~+150℃ 2 2.5A 220mΩ 3V~5.5V 8 8V~35V Bipolar Driver Yes HTSSOP-28 Stepper Motor Driver ROHSTexas InstrumentsStepper Motor DriverDRV8841PWPR
HTSSOP-28-40℃~+85℃ 2 2.5A 200mΩ 8.2V~45V Bipolar Driver Yes HTSSOP-28 Stepper Motor Driver ROHSTexas InstrumentsStepper Motor DriverA5976GLPTR-T
TSSOP-28-EP-40℃~+105℃ 1、2、4、16 2 2.8A 220mΩ 3V~5.5V Bipolar Driver STEP/DIR Yes TSSOP-28-EP Stepper Motor Driver ROHSAllegro MicroSystems, LLCStepper Motor DriverL6470H
HTSSOP-28-40℃~+150℃ 128 2 3A 550mΩ 8V~45V Bipolar Driver SPI Yes HTSSOP-28 Stepper Motor Driver ROHSSTMicroelectronicsStepper Motor DriverA3979SLPTR-T
HTSSOP-28-20℃~+85℃ 16 2 2.5A 280mΩ 3V~5.5V 8V~35V Bipolar Driver Overcurrent Protection、Over temperature protection、Under-voltage lockout、Motor step-out prevention function、Built-in charge pump、Power-on reset、Dead-time / shoot-through protection STEP/DIR Yes HTSSOP-28 Stepper Motor Driver ROHSAllegro MicroSystems, LLCStepper Motor DriverDRV8842PWPR
HTSSOP-28-40℃~+85℃ 1 200mΩ 5A 8.2V~45V 8.2V~45V Bipolar Driver Yes HTSSOP-28 Stepper Motor Driver ROHSTexas InstrumentsStepper Motor DriverDRV8452PWP
HTSSOP-28HTSSOP-28 Stepper Motor Driver ROHSTexas InstrumentsStepper Motor DriverDRV8824PWP
HTSSOP-28-EP-4.5mm-40℃~+85℃ 1.6A 2 32 630mΩ Bipolar Driver Overcurrent Protection、Over temperature protection、Under-voltage lockout、Motor step-out prevention function、Built-in charge pump STEP/DIR Yes HTSSOP-28-EP-4.5mm Stepper Motor Driver ROHSTexas InstrumentsStepper Motor Driver
Questions
Is there a KiCad symbol and footprint for the DRV8880PWPR?
Yes. The symbol is EasyEDA_Cloud:DRV8880PWPR and the footprint EasyEDA_Cloud:HTSSOP-28_L9.8-W4.5-P0.65-LS6.6-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the DRV8880PWPR?
HTSSOP-28, with 29 pins. Its footprint is drawn on this page.
Where is the DRV8880PWPR datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the DRV8880PWPR?
JLCPCB lists it as part C473386, with 2,061 in stock; the sellers' links on this page open their listings.
What can replace the DRV8880PWPR?
Parts like it in the library: the DRV8818PWPR by Texas Instruments, the DRV8841PWPR by Texas Instruments, the A5976GLPTR-T by Allegro MicroSystems, LLC and the L6470H by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.