
DRV8842PWPR
Texas InstrumentsExtended
-40℃~+85℃ 1 200mΩ 5A 8.2V~45V 8.2V~45V Bipolar Driver Yes HTSSOP-28 Stepper Motor Driver ROHS
- Part id
- ti/DRV8842PWPR
- Category
- Stepper Motor Driver
- Package
- HTSSOP-28
- Pins
- 29
- In stock
- 881 at JLCPCB (C181609)
- Used on
- 3 open-source boards
Overview
The DRV8842PWPR is a stepper Motor Driver made by Texas Instruments in a HTSSOP-28 package with 29 pins. -40℃~+85℃ 1 200mΩ 5A 8.2V~45V 8.2V~45V Bipolar Driver Yes HTSSOP-28 Stepper Motor Driver ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:DRV8842PWP, from EasyEDA) and its footprint (EasyEDA_Cloud:HTSSOP-28_L9.8-W4.5-P0.65-LS6.6-BL-EP, from EasyEDA), ready for a KiCad board. 881 are in stock at JLCPCB (part C181609). 3 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
Pinout
29| Pin | Name | Type |
|---|---|---|
| 1 | CP1 | Unspecified |
| 2 | CP2 | Unspecified |
| 3 | VCP | Unspecified |
| 4 | VM | Unspecified |
| 5 | OUT1 | Unspecified |
| 6 | ISEN | Unspecified |
| 7 | OUT2 | Unspecified |
| 8 | OUT2 | Unspecified |
| 9 | ISEN | Unspecified |
| 10 | OUT1 | Unspecified |
| 11 | VM | Unspecified |
| 12 | VREF | Unspecified |
| 13 | VREF | Unspecified |
| 14 | GND | Unspecified |
| 15 | V3P3OUT | Unspecified |
| 16 | nRESET | Unspecified |
| 17 | nSLEEP | Unspecified |
| 18 | nFAULT | Unspecified |
| 19 | DECAY | Unspecified |
| 20 | IN2 | Unspecified |
| 21 | IN1 | Unspecified |
| 22 | NC | Unspecified |
| 23 | I0 | Unspecified |
| 24 | I1 | Unspecified |
| 25 | I2 | Unspecified |
| 26 | I3 | Unspecified |
| 27 | I4 | Unspecified |
| 28 | GND | Unspecified |
| 29 | GND | Unspecified |
Open-source boards using it
3- 4 layers152.4 × 152.4 mm

- 4 layers100 × 86.3 mm

Archives
satomm1/Robot
This directory contains the electrical schematic for a breakout board for the Bosch BMI323 6-axis IMU. This IMU provides a 16 bit digital triaxial accelerometer, a 16 bit digital triaxial gyroscope, and a 16 bit digital…
138 partsMIT - 4 layers100 × 86.3 mm

Archives
satomm1/Robot
This directory contains the electrical schematic for a breakout board for the Bosch BMI323 6-axis IMU. This IMU provides a 16 bit digital triaxial accelerometer, a 16 bit digital triaxial gyroscope, and a 16 bit digital…
137 partsMIT
Parts like it
2DRV8824PWP
HTSSOP-28-EP-4.5mm-40℃~+85℃ 1.6A 2 32 630mΩ Bipolar Driver Overcurrent Protection、Over temperature protection、Under-voltage lockout、Motor step-out prevention function、Built-in charge pump STEP/DIR Yes HTSSOP-28-EP-4.5mm Stepper Motor Driver ROHSTexas InstrumentsStepper Motor DriverDRV8814PWP
HTSSOP-28-40℃~+85℃ 2 2.5A Current sensing/regulation function、Active braking function Yes HTSSOP-28 Brushed DC Motor Drivers ROHSTexas InstrumentsStepper Motor Driver
Questions
Is there a KiCad symbol and footprint for the DRV8842PWPR?
Yes. The symbol is EasyEDA_Cloud:DRV8842PWP and the footprint EasyEDA_Cloud:HTSSOP-28_L9.8-W4.5-P0.65-LS6.6-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the DRV8842PWPR?
HTSSOP-28, with 29 pins. Its footprint is drawn on this page.
Where is the DRV8842PWPR datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the DRV8842PWPR?
JLCPCB lists it as part C181609, with 881 in stock; the sellers' links on this page open their listings.
What can replace the DRV8842PWPR?
Parts like it in the library: the DRV8824PWP by Texas Instruments and the DRV8814PWP by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the DRV8842PWPR?
3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.