
CD74HCT377E
Texas InstrumentsExtended
-55℃~+125℃ 1 10pF 38ns@4.5V,50pF 4.5V~5.5V 4mA 4mA 50MHz 74HCT Series 8 8uA D-Type Rising Edge PDIP-20 Flip Flops ROHS
- Part id
- ti/CD74HCT377E
- Category
- Flip Flops
- Package
- PDIP-20
- Pins
- 20
- In stock
- 0 at JLCPCB (C1549841)
- Used on
- 2 open-source boards
Overview
The CD74HCT377E is a flip Flop made by Texas Instruments in a PDIP-20 package with 20 pins. -55℃~+125℃ 1 10pF 38ns@4.5V,50pF 4.5V~5.5V 4mA 4mA 50MHz 74HCT Series 8 8uA D-Type Rising Edge PDIP-20 Flip Flops ROHS.
PCBKit's library has its KiCad symbol (74xx:74LS377, from KiCad's library) and its footprint (Package_DIP:DIP-20_W7.62mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1549841). 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
Pinout
20| Pin | Name | Type |
|---|---|---|
| 1 | E | Input |
| 2 | Q0 | Output |
| 3 | D0 | Input |
| 4 | D1 | Input |
| 5 | Q1 | Output |
| 6 | Q2 | Output |
| 7 | D2 | Input |
| 8 | D3 | Input |
| 9 | Q3 | Output |
| 10 | GND | Power in |
| 11 | CP | Input |
| 12 | Q4 | Output |
| 13 | D4 | Input |
| 14 | D5 | Input |
| 15 | Q5 | Output |
| 16 | Q6 | Output |
| 17 | D6 | Input |
| 18 | D7 | Input |
| 19 | Q7 | Output |
| 20 | VCC | Power in |
Open-source boards using it
2- 4 layers290 × 215 mm

- 2 layers114.3 × 99.7 mm

I281 alu norless
brandtdamman/i281e-cpu
Developed by SDMAY24-14 Senior Design group under Dr. Stoytchev, the i281e CPU is an extended design from the original i281 CPU for educational purposes.
70 parts1
Parts like it
8SN74LS374N
PDIP-200℃~+70℃ 1 2.6mA 20ns 24mA 28ns@5V,45pF 4.75V~5.25V 40mA 50MHz 74LS Series 8 D-Type Rising Edge Tri-State PDIP-20 Latches ROHSTexas InstrumentsFlip FlopsCD74HCT273E
PDIP-20-55℃~+125℃ 1 10pF 12ns 30ns@4.5V,50pF 4.5V~5.5V 4mA 4mA 50MHz 74HCT Series 8 8uA Asynchronous D-Type Reset Rising Edge PDIP-20 Flip Flops ROHSTexas InstrumentsFlip FlopsCD74HCT564E
PDIP-20-55℃~+125℃ 1 10pF 35ns@4.5V,50pF 4.5V~5.5V 50MHz 6mA 6mA 74HCT Series 8 8uA D-Type Rising Edge PDIP-20 Flip Flops ROHSTexas InstrumentsFlip FlopsSN74HC174D
SOIC-16-40℃~+85℃ 0ns 1 14ns@6V,50pF 21ns 2V~6V 3pF 5.2mA 5.2mA 50MHz 6 74HC Series 8uA D-Type Reset Rising Edge SOIC-16 Flip Flops ROHSTexas InstrumentsFlip FlopsSN74HC174PW
TSSOP-16-40℃~+85℃ 0ns 1 21ns 27ns@6V,50pF 2V~6V 3pF 5.2mA 5.2mA 50MHz 6 74HC Series 8uA Asynchronous D-Type Reset Rising Edge TSSOP-16 Flip Flops ROHSTexas InstrumentsFlip FlopsCD74HCT377M96
SOIC-20-300mil-55℃~+125℃ 10pF 12ns 38ns@4.5V,50pF 3ns 4.5V~5.5V 4mA 4mA 50MHz 74HCT Series 8 8 8uA D-Type Enable Rising Edge SOIC-20-300mil Flip Flops ROHSTexas InstrumentsFlip FlopsCD74HC74M96
SOIC-14-55℃~+125℃ 1 10pF 12ns 2 2V~6V 30ns@6V,50pF 3ns 4uA 5.2mA 5.2mA 50MHz 74HC Series Asynchronous Complementary D-Type Rising Edge Set and Reset SOIC-14 Flip Flops ROHSTexas InstrumentsFlip FlopsSN74LS374DB
SSOP-20-208mil0℃~+70℃ 1 2.6mA 24mA 28ns@5V,45pF 4.75V~5.25V 40mA 50MHz 74LS Series 8 D-Type Rising Edge SSOP-20-208mil Latches ROHSTexas InstrumentsFlip Flops
Questions
Is there a KiCad symbol and footprint for the CD74HCT377E?
Yes. The symbol is 74xx:74LS377 and the footprint Package_DIP:DIP-20_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the CD74HCT377E?
PDIP-20, with 20 pins. Its footprint is drawn on this page.
Where is the CD74HCT377E datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the CD74HCT377E?
JLCPCB lists it as part C1549841, with 0 in stock; the sellers' links on this page open their listings.
What can replace the CD74HCT377E?
Parts like it in the library: the SN74LS374N by Texas Instruments, the CD74HCT273E by Texas Instruments, the CD74HCT564E by Texas Instruments and the SN74HC174D by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the CD74HCT377E?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.